Re: lm sensors sysfs file structure

[Martin Schlemmer]

This is a MIME-formatted message.  If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-15482-1048792853-0001-2
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

On Thu, 2003-03-27 at 20:52, Greg KH wrote:

> > Is this the way you want to go? Just an example for the voltages.
>=20
> That looks very good to me, nice=20

While we are at it, some form question.  The w83781d have a
magnitude of files in sysfs if you split them like this, so
I went for the shorter (easier?) way.

This ok, or should I split it up a bit more.  Note that I
have not done much for indentation yet.

------------------------------------------------------
#define show_in_reg(reg) \
static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
{ \
    struct i2c_client *client =3D to_i2c_client(dev); \
    struct w83781d_data *data =3D i2c_get_clientdata(client); \
    w83781d_update_client(client); \
     \
    return sprintf(buf,"%ld\n", \
        IN_FROM_REG(data->reg[nr])); \
}
show_in_reg(in);
show_in_reg(in_min);
show_in_reg(in_max);

#define store_in_reg(REG,reg) \
static ssize_t store_##reg (struct device *dev, const char *buf, size_t
count, int nr) \
{ \
    struct i2c_client *client =3D to_i2c_client(dev); \
    struct w83781d_data *data =3D i2c_get_clientdata(client); \
    int reg, ret; \
     \
    ret =3D sscanf(buf, "%d", &reg); \
    if (ret =3D=3D -1) return -EINVAL; \
    if (ret >=3D 1) { \
        data->reg[nr] =3D IN_TO_REG(reg); \
        w83781d_write_value(client, W83781D_REG_IN_##REG(nr),
data->reg[nr]); \
    } \
    return count; \
}
store_in_reg(MIN, in_min);
store_in_reg(MAX, in_max);

#define show_in_offset(offset) \
static ssize_t \
show_in_##offset (struct device *dev, char *buf) \
{ \
        return show_in(dev, buf, 0x##offset); \
} \
static DEVICE_ATTR(in_input##offset, S_IRUGO | S_IWUSR,
show_in_##offset, NULL)

#define show_in_reg_offset(reg,offset) \
static ssize_t show_##reg##offset (struct device *dev, char *buf) \
{ \
    return show_##reg (dev, buf, 0x##offset); \
} \
static ssize_t store_##reg##offset (struct device *dev, const char *buf,
size_t count) \
{ \
    return store_##reg (dev, buf, count, 0x##offset); \
} \
static DEVICE_ATTR(##reg##offset, S_IRUGO| S_IWUSR, show_##reg##offset,
store_##reg##offset)

#define show_in_offsets(offset) \
show_in_offset(offset); \
show_in_reg_offset(in_min, offset); \
show_in_reg_offset(in_max, offset);

show_in_offsets(0);
show_in_offsets(1);
show_in_offsets(2);
show_in_offsets(3);
show_in_offsets(4);
show_in_offsets(5);
show_in_offsets(6);
show_in_offsets(7);
show_in_offsets(8);

--=20

Martin Schlemmer

--=_courier-15482-1048792853-0001-2
Content-Type: application/pgp-signature; name="signature.asc"
Content-Transfer-Encoding: 7bit
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQA+g03LqburzKaJYLYRAo8pAJ9YRYUsUZTVEfIONHgsBa4xJ7+wZwCfWbpE
WU4cHndY5dzF93zMdvIwiCI=
=yKzO
-----END PGP SIGNATURE-----

--=_courier-15482-1048792853-0001-2--