PROBLEM: ide_floppy and 2.5.69

Udo A. Steinberg (us15@os.inf.tu-dresden.de)
Sun, 11 May 2003 17:19:48 +0200


This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-2890-1052666445-0001-2
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi,

Someone already reported problems with ide-floppy in 2.5.69, but this seems to
be a slightly different issue. I'm not seeing timeouts, but the following
backtrace with an IDE Zip drive (hde) instead. Also strange is that I have
sector 0 read errors on the cdrom (hdf) during bootup.
Looks like it tries to read the partition table from a cdrom without cd.
See below.

-Regards,
-Udo.

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20265: IDE controller at PCI slot 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide0: BM-DMA at 0x8000-0x8007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8008-0x800f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTLA-307030, ATA DISK drive
hdb: IC35L120AVV207-0, ATA DISK drive
ide0 at 0x9400-0x9407,0x9002 on irq 10
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:DMA
ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio
hde: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdf: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100)
hda: hda1
hdb: host protected area => 1
hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100)
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 >
end_request: I/O error, dev hdf, sector 0
hdf: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdf, sector 0
ide-floppy driver 0.99.newide
hde: 98304kB, 196608 blocks, 512 sector size
hde: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hde: hde1
hde: hde1
Badness in kobject_register at lib/kobject.c:293
Call Trace:
[<c020c968>] kobject_register+0x58/0x70
[<c017c747>] register_disk+0x137/0x140
[<c026609e>] add_disk+0x4e/0x60
[<c0266020>] exact_match+0x0/0x10
[<c0266030>] exact_lock+0x0/0x20
[<c02a6def>] idefloppy_attach+0x16f/0x1a0
[<c029b49f>] ata_attach+0x4f/0x120
[<c029c3b5>] ide_register_driver+0xf5/0x110
[<c02a6e3b>] idefloppy_init+0x1b/0x60
[<c046272c>] do_initcalls+0x2c/0xa0
[<c01288df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c010707d>] kernel_thread_helper+0x5/0x18

--=_courier-2890-1052666445-0001-2
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.3.1 (GNU/Linux)

iD8DBQE+vmoWnhRzXSM7nSkRAkMkAJ0RtNhq8xJZxstm1MDrQtz+gfiA5wCgga9c
NQdQCPA8edqI64euVxpEhI4=
=Pt3w
-----END PGP SIGNATURE-----

--=_courier-2890-1052666445-0001-2--