Re: Different geometry settings for identical drives

Jeffrey W. Baker (jwbaker@acm.org)
02 Jun 2003 11:13:52 -0700


On Fri, 2003-05-30 at 17:19, Petr Vandrovec wrote:
> On 30 May 03 at 16:38, Jeffrey W. Baker wrote:
> > On Fri, 2003-05-30 at 16:20, Petr Vandrovec wrote:
> > > On 30 May 03 at 15:46, Jeffrey Baker wrote:
> > >
> > > > hda: host protected area => 1
> > > > hda: setmax LBA 234441648, native 234375000
> > > > hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=232514/16/63, UDMA(100)
> > > > hdc: attached ide-disk driver.
> > > > hdc: host protected area => 1
> > > > hdc: setmax LBA 234441648, native 234375000
> > > > hdc: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=232514/16/63, UDMA(100)
> > > > hdd: attached ide-cdrom driver.
> > > > hdd: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
> > > >
> > > > The result is that hda works fine but hdc doesn't. When I try to mke2fs
> > > > on the latter I see:
> > > >
> > > > hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > > > hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=234441583, sector=232343808
>
> > The x86-64.org patch doesn't touch much outside of arch/x86_64. You are
> > right that CONFIG_IDE_STROKE is off:
>
> Ok, after looking at your kernel output more, it seems like that there is
> something strange with your drive: we asked for sector 232343808 (0xDD94900),
> but your drive reports SectorIdNotFound on sector 234441583 (0xDF94B6F),
> which is 2097775 (0x020026F) sectors away from sector we requested...
> As with LBA largest transfer length is 256 sectors, there is something
> wrong with your disk firmware... Which points to the dead disk
> together with some bug in the disk firmware (maybe drive wanted to
> report bug in sector DD9496F, but got it somehow wrong?). Can you
> try running Western's drive diagnostics on that drive?

I rebooted with the same drive but added hdc=14589,255,63, and now I can
make the filesystem perfectly well. So it does seem to be an issue with
the way the disk is addressed. Or I could just be fooling myself.

Later I can try swapping in identical hardware and see if the problem
persists. All these disks are brand new and were burned in and
qualified by the vendor.

-jwb

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/