[PATCH] irq consolidation, new attempt (common part)

Andrey Panin (pazke@donpac.ru)
Mon, 30 Jun 2003 13:21:54 +0400


This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-15146-1056964994-0001-2
Content-Type: multipart/mixed; boundary="6TrnltStXW4iwmi0"
Content-Disposition: inline

--6TrnltStXW4iwmi0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi all,

new version of irq handling code consolidation patch (2.5.73).

Changes since previous patch:
- irq_desc array removed from common irq code;
- irq_dir, irq_affinity and smp_affinity_entry static
NR_IRQS sized arrays replaced with corresponding entries
in the irq_desc_t structure;
- for_each_irq() arch specific macro introduced.

Please take a look.

Best regards.

--=20
Andrey Panin | Linux and UNIX system administrator
pazke@donpac.ru | PGP key: wwwkeys.pgp.net

--6TrnltStXW4iwmi0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="patch-irq-common-2.5.73"
Content-Transfer-Encoding: quoted-printable

diff --minimal -urN -X /usr/share/dontdiff linux-2.5.73.vanilla/kernel/irq.=
c linux-2.5.73/kernel/irq.c
--- linux-2.5.73.vanilla/kernel/irq.c 1970-01-01 03:00:00.000000000 +0300
+++ linux-2.5.73/kernel/irq.c 2003-06-29 11:45:27.000000000 +0400
@@ -0,0 +1,908 @@
+/*
+ * linux/kernel/irq.c
+ *
+ * Architecture independent parts of IRQ handling.
+ *
+ * Copyright (C) 1992-2002 Linus Torvalds.
+ *
+ * Modified from the alpha version by Andrey Panin.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ *
+ * IRQs are in fact implemented a bit like signal handlers for the kernel.
+ * Naturally it's not a 1:1 relation, but there are similarities.
+ *
+ * Linux has a controller-independent x86 interrupt architecture.
+ * every controller has a 'controller-template', that is used
+ * by the main code to do the right thing. Each driver-visible
+ * interrupt source is transparently wired to the apropriate
+ * controller. Thus drivers need not be aware of the
+ * interrupt-controller.
+ *
+ * The code is designed to be easily extended with new/different
+ * interrupt controllers, without having to do assembly magic.
+ */
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/jiffies.h>
+#include <linux/proc_fs.h>
+#include <linux/stringify.h>
+#include <linux/kallsyms.h>
+
+#include <asm/param.h>
+#include <asm/semaphore.h>
+#include <asm/hw_irq.h>
+#include <asm/uaccess.h>
+
+/*
+ * Special irq handlers.
+ */
+
+irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ return IRQ_NONE;
+}
+
+/*
+ * Generic no controller code
+ */
+atomic_t irq_err_count;
+
+static void no_irq_enable_disable(unsigned int irq) { }
+static unsigned int no_irq_startup(unsigned int irq) { return 0; }
+
+static void no_irq_ack(unsigned int irq)
+{
+ atomic_inc(&irq_err_count);
+ printk(KERN_CRIT "Unexpected IRQ trap at vector %u\n", irq);
+ arch_ack_bad_irq(irq);
+}
+
+struct hw_interrupt_type no_irq_type =3D {
+ .typename =3D "none",
+ .startup =3D no_irq_startup,
+ .shutdown =3D no_irq_enable_disable,
+ .enable =3D no_irq_enable_disable,
+ .disable =3D no_irq_enable_disable,
+ .ack =3D no_irq_ack,
+ .end =3D no_irq_enable_disable,
+};
+
+/*
+ * This should really return information about whether
+ * we should do bottom half handling etc. Right now we
+ * end up _always_ checking the bottom half, which is a
+ * waste of time and is not what some drivers would
+ * prefer.
+ */
+int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
+ struct irqaction *action)
+{
+ int status =3D 1; /* Force the "do bottom halves" bit */
+ int retval =3D 0;
+
+ if (!(action->flags & SA_INTERRUPT))
+ local_irq_enable();
+
+ do {
+ status |=3D action->flags;
+ retval |=3D action->handler(irq, action->dev_id, regs);
+ action =3D action->next;
+ } while (action);
+
+ if (status & SA_SAMPLE_RANDOM)
+ add_interrupt_randomness(irq);
+
+ local_irq_disable();
+
+ return retval;
+}
+
+static void __report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action=
_ret)
+{
+ struct irqaction *action;
+
+ if (action_ret !=3D IRQ_HANDLED && action_ret !=3D IRQ_NONE) {
+ printk(KERN_ERR "irq event %d: bogus return value %x\n",
+ irq, action_ret);
+ } else {
+ printk(KERN_ERR "irq %d: nobody cared!\n", irq);
+ }
+ dump_stack();
+ printk(KERN_ERR "handlers:\n");
+ action =3D desc->action;
+ do {
+ printk(KERN_ERR "[<%p>]", action->handler);
+ print_symbol(" (%s)",
+ (unsigned long)action->handler);
+ printk("\n");
+ action =3D action->next;
+ } while (action);
+}
+
+static void report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action_r=
et)
+{
+ static int count =3D 100;
+
+ if (count) {
+ count--;
+ __report_bad_irq(irq, desc, action_ret);
+ }
+}
+
+static int noirqdebug;
+
+static int __init noirqdebug_setup(char *str)
+{
+ noirqdebug =3D 1;
+ printk(KERN_INFO "IRQ lockup detection disabled\n");
+ return 1;
+}
+
+__setup("noirqdebug", noirqdebug_setup);
+
+/*
+ * If 99,900 of the previous 100,000 interrupts have not been handled then
+ * assume that the IRQ is stuck in some manner. Drop a diagnostic and try=
to
+ * turn the IRQ off.
+ *
+ * (The other 100-of-100,000 interrupts may have been a correctly-function=
ing
+ * device sharing an IRQ with the failing one)
+ *
+ * Called under desc->lock
+ */
+void note_interrupt(int irq, irq_desc_t *desc, irqreturn_t action_ret)
+{
+ if (noirqdebug)
+ return;
+
+ if (action_ret !=3D IRQ_HANDLED) {
+ desc->irqs_unhandled++;
+ if (action_ret !=3D IRQ_NONE)
+ report_bad_irq(irq, desc, action_ret);
+ }
+
+ desc->irq_count++;
+ if (desc->irq_count < 100000)
+ return;
+
+ desc->irq_count =3D 0;
+ if (desc->irqs_unhandled > 99900) {
+ /*
+ * The interrupt is stuck
+ */
+ __report_bad_irq(irq, desc, action_ret);
+ /*
+ * Now kill the IRQ
+ */
+ printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
+ desc->status |=3D IRQ_DISABLED;
+ desc->handler->disable(irq);
+ }
+ desc->irqs_unhandled =3D 0;
+}
+
+#if defined(CONFIG_SMP) && !defined(HAVE_ARCH_SYNCRONIZE_IRQ)
+
+inline void synchronize_irq(unsigned int irq)
+{
+ irq_desc_t *desc =3D irq_desc(irq);
+
+ /* is there anything to synchronize with? */
+ if (!desc->action)
+ return;
+
+ while (desc->status & IRQ_INPROGRESS)
+ cpu_relax();
+}
+
+#endif
+
+/*
+ * Workarounds for interrupt types without startup()/shutdown() (ppc, ppc6=
4).
+ * Will be removed some day.
+ */
+
+static int startup_irq(unsigned int irq)
+{
+ irq_desc_t *desc =3D irq_desc(irq);
+
+ if (desc->handler->startup)
+ return desc->handler->startup(irq);
+ else if (desc->handler->enable)
+ desc->handler->enable(irq);
+ else=20
+ BUG();
+ return 0;
+}
+
+static void shutdown_irq(unsigned int irq)
+{
+ irq_desc_t *desc =3D irq_desc(irq);
+
+ if (desc->handler->shutdown)
+ desc->handler->shutdown(irq);
+ else if (desc->handler->disable)
+ desc->handler->disable(irq);
+ else=20
+ BUG();
+}
+
+/*
+ * Generic enable/disable code: this just calls
+ * down into the PIC-specific version for the actual
+ * hardware disable after having gotten the irq
+ * controller lock.=20
+ */
+=20
+/**
+ * disable_irq_nosync - disable an irq without waiting
+ * @irq: Interrupt to disable
+ *
+ * Disable the selected interrupt line. Disables and Enables are
+ * nested.
+ * Unlike disable_irq(), this function does not ensure existing
+ * instances of the IRQ handler have completed before returning.
+ *
+ * This function may be called from IRQ context.
+ */
+inline void disable_irq_nosync(unsigned int irq)
+{
+ irq_desc_t *desc =3D irq_desc(irq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (!desc->depth++) {
+ /* Needed for ppc & ppc64, doesn't harm others (really ?) */
+ if (!(desc->status & IRQ_PER_CPU))
+ desc->status |=3D IRQ_DISABLED;
+ desc->handler->disable(irq);
+ }
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+/**
+ * disable_irq - disable an irq and wait for completion
+ * @irq: Interrupt to disable
+ *
+ * Disable the selected interrupt line. Enables and Disables are
+ * nested. That is for two disables you need two enables.
+ * This function waits for any pending IRQ handlers for this interrupt
+ * to complete before returning. If you use this function while
+ * holding a resource the IRQ handler may need you will deadlock.
+ *
+ * This function may be called - with care - from IRQ context.
+ */
+void disable_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ synchronize_irq(irq);
+}
+
+/**
+ * enable_irq - enable handling of an irq
+ * @irq: Interrupt to enable
+ *
+ * Undoes the effect of one call to disable_irq(). If this
+ * matches the last disable, processing of interrupts on this
+ * IRQ line is re-enabled.
+ *
+ * This function may be called from IRQ context.
+ */
+void enable_irq(unsigned int irq)
+{
+ irq_desc_t *desc =3D irq_desc(irq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ switch (desc->depth) {
+ case 1: {
+ unsigned int status =3D desc->status & ~IRQ_DISABLED;
+ desc->status =3D status;
+ if ((status & (IRQ_PENDING | IRQ_REPLAY)) =3D=3D IRQ_PENDING) {
+ desc->status =3D status | IRQ_REPLAY;
+ hw_resend_irq(desc->handler, irq);
+ }
+ desc->handler->enable(irq);
+ /* fall-through */
+ }
+ default:
+ desc->depth--;
+ break;
+ case 0:
+ printk(KERN_ERR "enable_irq(%u) unbalanced from %p\n",
+ irq, __builtin_return_address(0));
+ }
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+/**
+ * request_irq - allocate an interrupt line
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs
+ * @irqflags: Interrupt type flags
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A cookie passed back to the handler function
+ *
+ * This call allocates interrupt resources and enables the
+ * interrupt line and IRQ handling. From the point this
+ * call is made your handler function may be invoked. Since
+ * your handler function must clear any interrupt the board=20
+ * raises, you must take care both to initialise your hardware
+ * and to set up the interrupt handler in the right order.
+ *
+ * Dev_id must be globally unique. Normally the address of the
+ * device data structure is used as the cookie. Since the handler
+ * receives this value it makes sense to use it.
+ *
+ * If your interrupt is shared you must pass a non NULL dev_id
+ * as this is required when freeing the interrupt.
+ *
+ * Flags:
+ *
+ * SA_SHIRQ Interrupt is shared
+ *
+ * SA_INTERRUPT Disable local interrupts while processing
+ *
+ * SA_SAMPLE_RANDOM The interrupt can be used for entropy
+ */
+int request_irq(unsigned int irq,
+ irqreturn_t (*handler)(int, void *, struct pt_regs *),
+ unsigned long irqflags,
+ const char *devname,
+ void *dev_id)
+{
+ int retval;
+ struct irqaction *action;
+
+ /*
+ * Sanity-check: shared interrupts should REALLY pass in
+ * a real dev-ID, otherwise we'll have trouble later trying
+ * to figure out which interrupt is which (messes up the
+ * interrupt freeing logic etc).
+ */
+ if (irqflags & SA_SHIRQ) {
+ if (!dev_id) {
+ printk(KERN_ERR "Bad boy: %s (at %p) called us " \
+ "without a dev_id!\n", devname,
+ __builtin_return_address(0));
+ return -EINVAL;
+ }
+ }
+
+ if (!irq_valid(irq) || !handler)
+ return -EINVAL;
+
+ action =3D kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler =3D handler;
+ action->flags =3D irqflags;
+ action->mask =3D 0;
+ action->name =3D devname;
+ action->next =3D NULL;
+ action->dev_id =3D dev_id;
+
+ retval =3D setup_irq(irq, action);
+ if (retval)
+ kfree(action);
+ return retval;
+}
+
+#ifndef HAVE_ARCH_IRQ_PROC
+void register_irq_proc(unsigned int irq);
+#endif
+
+int setup_irq(unsigned int irq, struct irqaction *new)
+{
+ int shared =3D 0;
+ unsigned long flags;
+ struct irqaction *old, **p;
+ irq_desc_t *desc =3D irq_desc(irq);
+
+ if (desc->handler =3D=3D &no_irq_type)
+ return -ENOSYS;
+
+ /*
+ * Some drivers like serial.c use request_irq() heavily,
+ * so we have to be careful not to interfere with a
+ * running system.
+ */
+ if (new->flags & SA_SAMPLE_RANDOM) {
+ /*
+ * This function might sleep, we want to call it first,
+ * outside of the atomic block.
+ * Yes, this might clear the entropy pool if the wrong
+ * driver is attempted to be loaded, without actually
+ * installing a new handler, but is this really a problem,
+ * only the sysadmin is able to do this.
+ */
+ rand_initialize_irq(irq);
+ }
+
+ arch_setup_irq(irq, desc, new);
+
+ /*
+ * The following block of code has to be executed atomically
+ */
+ spin_lock_irqsave(&desc->lock, flags);
+ p =3D &desc->action;
+ if ((old =3D *p) !=3D NULL) {
+ /* Can't share interrupts unless both agree to */
+ if (!(old->flags & new->flags & SA_SHIRQ)) {
+ spin_unlock_irqrestore(&desc->lock, flags);
+ return -EBUSY;
+ }
+
+ /* add new interrupt at end of irq queue */
+ do {
+ p =3D &old->next;
+ old =3D *p;
+ } while (old);
+ shared =3D 1;
+ }
+
+ *p =3D new;
+
+ if (!shared) {
+ desc->depth =3D 0;
+ desc->status &=3D ARCH_NONSHARED_IRQ_MASK;
+ startup_irq(irq);
+ }
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ register_irq_proc(irq);
+
+ return 0;
+}
+
+/**
+ * free_irq - free an interrupt
+ * @irq: Interrupt line to free
+ * @dev_id: Device identity to free
+ *
+ * Remove an interrupt handler. The handler is removed and if the
+ * interrupt line is no longer in use by any driver it is disabled.
+ * On a shared IRQ the caller must ensure the interrupt is disabled
+ * on the card it drives before calling this function. The function
+ * does not return until any executing interrupts for this IRQ
+ * have completed.
+ *
+ * This function must not be called from interrupt context.=20
+ */
+void free_irq(unsigned int irq, void *dev_id)
+{
+ irq_desc_t *desc;
+ struct irqaction **p;
+ unsigned long flags;
+
+ if (!irq_valid(irq)) {
+ printk(KERN_CRIT "Trying to free IRQ%d\n", irq);
+ return;
+ }
+
+ desc =3D irq_desc(irq);
+ spin_lock_irqsave(&desc->lock, flags);
+ p =3D &desc->action;
+ for (;;) {
+ struct irqaction * action =3D *p;
+ if (action) {
+ struct irqaction **pp =3D p;
+ p =3D &action->next;
+ if (action->dev_id !=3D dev_id)
+ continue;
+
+ /* Found it - now remove it from the list of entries */
+ *pp =3D action->next;
+ if (!desc->action) {
+ desc->status |=3D IRQ_DISABLED;
+ shutdown_irq(irq);
+ }
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ /* Wait to make sure it's not being used on another CPU */
+ synchronize_irq(irq);
+ kfree(action);
+ return;
+ }
+ printk(KERN_CRIT "Trying to free free IRQ%d\n", irq);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ return;
+ }
+}
+
+#ifndef HAVE_ARCH_IRQ_PROBE
+
+/*
+ * IRQ autodetection code..
+ *
+ * This depends on the fact that any interrupt that
+ * comes in on to an unassigned handler will get stuck
+ * with "IRQ_WAITING" cleared and the interrupt
+ * disabled.
+ */
+
+static DECLARE_MUTEX(probe_sem);
+
+/**
+ * probe_irq_on - begin an interrupt autodetect
+ *
+ * Commence probing for an interrupt. The interrupts are scanned
+ * and a mask of potential interrupt lines is returned.
+ *
+ */
+unsigned long probe_irq_on(void)
+{
+ unsigned int i;
+ irq_desc_t *desc;
+ unsigned long val;
+ unsigned long delay;
+
+ down(&probe_sem);
+ /*=20
+ * something may have generated an irq long ago and we want to
+ * flush such a longstanding irq before considering it as spurious.=20
+ */
+ for_each_irq(i) {
+ desc =3D irq_desc(i);
+
+ spin_lock_irq(&desc->lock);
+ if (!desc->action)=20
+ startup_irq(i);
+ spin_unlock_irq(&desc->lock);
+ }
+
+ /* Wait for longstanding interrupts to trigger. */
+ for (delay =3D jiffies + HZ/50; time_after(delay, jiffies); )
+ /* about 20ms delay */ barrier();
+
+ /*
+ * enable any unassigned irqs
+ * (we must startup again here because if a longstanding irq
+ * happened in the previous stage, it may have masked itself)
+ */
+ for_each_irq(i) {
+ desc =3D irq_desc(i);
+
+ spin_lock_irq(&desc->lock);
+ if (!desc->action) {
+ desc->status |=3D IRQ_AUTODETECT | IRQ_WAITING;
+ if (startup_irq(i))
+ desc->status |=3D IRQ_PENDING;
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+
+ /*
+ * Wait for spurious interrupts to trigger
+ */
+ for (delay =3D jiffies + HZ/10; time_after(delay, jiffies); )
+ /* about 100ms delay */ barrier();
+
+ /*
+ * Now filter out any obviously spurious interrupts
+ */
+ val =3D 0;
+ for_each_irq(i) {
+ irq_desc_t *desc =3D irq_desc(i);
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status =3D desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ /* It triggered already - consider it spurious. */
+ if (!(status & IRQ_WAITING)) {
+ desc->status =3D status & ~IRQ_AUTODETECT;
+ shutdown_irq(i);
+ } else
+ if (i < 32)
+ val |=3D 1 << i;
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+
+ return val;
+}
+
+/**
+ * probe_irq_mask - scan a bitmap of interrupt lines
+ * @val: mask of interrupts to consider
+ *
+ * Scan the ISA bus interrupt lines and return a bitmap of
+ * active interrupts. The interrupt probe logic state is then
+ * returned to its previous value. This function can handle only=20
+ * legacy ISA interrupts
+ *
+ * Note: we need to scan all the irq's even though we will
+ * only return ISA irq numbers - just so that we reset them
+ * all to a known state.
+ */
+unsigned int probe_irq_mask(unsigned long val)
+{
+ int i;
+ unsigned int mask;
+
+ mask =3D 0;
+ for_each_irq(i) {
+ irq_desc_t *desc =3D irq_desc(i);
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status =3D desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ if (i < 16 && !(status & IRQ_WAITING))
+ mask |=3D 1 << i;
+
+ desc->status =3D status & ~IRQ_AUTODETECT;
+ shutdown_irq(i);
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+ up(&probe_sem);
+
+ return mask & val;
+}
+
+/**
+ * probe_irq_off - end an interrupt autodetect
+ * @val: mask of potential interrupts (unused)
+ *
+ * Scans the unused interrupt lines and returns the line which
+ * appears to have triggered the interrupt. If no interrupt was
+ * found then zero is returned. If more than one interrupt is
+ * found then minus the first candidate is returned to indicate
+ * their is doubt. This function can handle any interrupt source.
+ *
+ * The interrupt probe logic state is returned to its previous
+ * value.
+ *
+ * BUGS: When used in a module (which arguably shouldnt happen)
+ * nothing prevents two IRQ probe callers from overlapping. The
+ * results of this are non-optimal.
+ */
+int probe_irq_off(unsigned long val)
+{
+ int i, irq_found, nr_irqs;
+
+ nr_irqs =3D 0;
+ irq_found =3D 0;
+ for_each_irq(i) {
+ irq_desc_t *desc =3D irq_desc(i);
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status =3D desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ if (!(status & IRQ_WAITING)) {
+ if (!nr_irqs)
+ irq_found =3D i;
+ nr_irqs++;
+ }
+ desc->status =3D status & ~IRQ_AUTODETECT;
+ shutdown_irq(i);
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+ up(&probe_sem);
+
+ if (nr_irqs > 1)
+ irq_found =3D -irq_found;
+ return irq_found;
+}
+
+#endif /* HAVE_ARCH_IRQ_PROBE */
+
+
+#if defined(CONFIG_PROC_FS) && !defined(HAVE_ARCH_IRQ_PROC)
+
+unsigned int parse_hex_value(const char __user *buffer, unsigned long coun=
t,
+ unsigned long *ret)
+{
+ unsigned char hexnum[ARCH_AFFINITY_WIDTH];
+ unsigned long value, i;
+
+ if (!count)
+ return -EINVAL;
+ if (count > ARCH_AFFINITY_WIDTH)
+ count =3D ARCH_AFFINITY_WIDTH;
+ if (copy_from_user(hexnum, buffer, count))
+ return -EFAULT;
+
+ /*
+ * Parse the first ARCH_AFFINITY_WIDTH characters as a hex
+ * string, any non-hex char is end-of-string. '00e1', 'e1', '00E1',
+ * 'E1' are all the same.
+ */
+ value =3D 0;
+
+ for (i =3D 0; i < count; i++) {
+ unsigned int c =3D hexnum[i];
+
+ switch (c) {
+ case '0' ... '9': c -=3D '0'; break;
+ case 'a' ... 'f': c -=3D 'a' - 10; break;
+ case 'A' ... 'F': c -=3D 'A' - 10; break;
+ default:
+ goto out;
+ }
+ value =3D (value << 4) | c;
+ }
+out:
+ *ret =3D value;
+ return 0;
+}
+
+#define MAX_NAMELEN 10
+
+struct proc_dir_entry *root_irq_dir;
+
+#ifdef CONFIG_SMP
+
+static int irq_affinity_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int irq =3D (long)data;
+
+ if (!irq_valid(irq))
+ return -EINVAL;
+ if (count < ARCH_AFFINITY_WIDTH + 1)
+ return -EINVAL;
+ return sprintf (page, "%0" __stringify(ARCH_AFFINITY_WIDTH) "lx\n",
+ irq_desc(irq)->irq_affinity);
+}
+
+static int irq_affinity_write_proc(struct file *file, const char __user *b=
uffer,
+ unsigned long count, void *data)
+{
+ int irq =3D (long) data, full_count =3D count, err;
+ irq_desc_t *desc;
+ unsigned long new_value;
+
+ if (!irq_valid(irq))
+ return -EINVAL;
+
+ desc =3D irq_desc(irq);
+
+ if (!desc->handler->set_affinity)
+ return -EIO;
+
+ err =3D parse_hex_value(buffer, count, &new_value);
+
+ /*
+ * Do not allow disabling IRQs completely - it's a too easy
+ * way to make the system unusable accidentally :-) At least
+ * one online CPU still has to be targeted.
+ */
+ if (!(new_value & cpu_online_map))
+ return -EINVAL;
+
+ desc->irq_affinity =3D new_value;
+ desc->handler->set_affinity(irq, new_value);
+
+ return full_count;
+}
+#endif
+
+void register_irq_proc(unsigned int irq)
+{
+ irq_desc_t *desc;
+ char name[MAX_NAMELEN];
+
+ if (!root_irq_dir || !irq_valid(irq))
+ return;
+
+ desc =3D irq_desc(irq);
+
+ if ((desc->handler =3D=3D &no_irq_type) || desc->irq_dir)
+ return;
+
+ memset(name, 0, MAX_NAMELEN);
+ sprintf(name, "%d", irq);
+
+ /* create /proc/irq/1234 */
+ desc->irq_dir =3D proc_mkdir(name, root_irq_dir);
+
+#ifdef CONFIG_SMP
+ if (desc->handler->set_affinity) {
+ struct proc_dir_entry *entry;
+
+ /* create /proc/irq/1234/smp_affinity */
+ entry =3D create_proc_entry("smp_affinity", 0600, desc->irq_dir);
+
+ if (entry) {
+ entry->nlink =3D 1;
+ entry->data =3D (void *)(long)irq;
+ entry->read_proc =3D irq_affinity_read_proc;
+ entry->write_proc =3D irq_affinity_write_proc;
+ }
+
+ desc->smp_affinity_entry =3D entry;
+ }
+#endif
+}
+
+#ifdef CONFIG_SMP
+
+unsigned long prof_cpu_mask =3D ~0UL;
+
+static int prof_cpu_mask_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ unsigned long *mask =3D (unsigned long *) data;
+ if (count < ARCH_AFFINITY_WIDTH + 1)
+ return -EINVAL;
+ return sprintf (page, "%0" __stringify(ARCH_AFFINITY_WIDTH) "lx\n",=20
+ *mask);
+}
+
+static int prof_cpu_mask_write_proc(struct file *file, const char __user *=
buffer,
+ unsigned long count, void *data)
+{
+ unsigned long *mask =3D (unsigned long *) data, full_count =3D count, err;
+ unsigned long new_value;
+
+ err =3D parse_hex_value(buffer, count, &new_value);
+ if (err)
+ return err;
+
+ *mask =3D new_value;
+ return full_count;
+}
+#endif
+
+void init_irq_proc(void)
+{
+ int i;
+
+ /* create /proc/irq */
+ root_irq_dir =3D proc_mkdir("irq", 0);
+
+#ifdef CONFIG_SMP
+ {
+ struct proc_dir_entry *entry;
+
+ /* create /proc/irq/prof_cpu_mask */
+ entry =3D create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);
+ if (!entry)
+ return;
+
+ entry->nlink =3D 1;
+ entry->data =3D (void *)&prof_cpu_mask;
+ entry->read_proc =3D prof_cpu_mask_read_proc;
+ entry->write_proc =3D prof_cpu_mask_write_proc;
+ }
+#endif
+
+ /*
+ * Create entries for all existing IRQs.
+ */
+ if (arch_can_create_irq_proc()) {
+ for_each_irq(i) {
+ if (irq_desc(i)->handler !=3D &no_irq_type)
+ register_irq_proc(i);
+ }
+ }
+}
+
+#endif
diff --minimal -urN -X /usr/share/dontdiff linux-2.5.73.vanilla/kernel/Make=
file linux-2.5.73/kernel/Makefile
--- linux-2.5.73.vanilla/kernel/Makefile 2003-06-27 20:32:25.000000000 +0400
+++ linux-2.5.73/kernel/Makefile 2003-06-27 21:28:38.000000000 +0400
@@ -19,6 +19,7 @@
obj-$(CONFIG_BSD_PROCESS_ACCT) +=3D acct.o
obj-$(CONFIG_SOFTWARE_SUSPEND) +=3D suspend.o
obj-$(CONFIG_COMPAT) +=3D compat.o
+obj-$(CONFIG_GENERIC_IRQ) +=3D irq.o
=20
ifneq ($(CONFIG_IA64),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-poi=
nter is
diff --minimal -urN -X /usr/share/dontdiff linux-2.5.73.vanilla/include/lin=
ux/irq.h linux-2.5.73/include/linux/irq.h
--- linux-2.5.73.vanilla/include/linux/irq.h 2003-06-27 20:33:06.000000000 =
+0400
+++ linux-2.5.73/include/linux/irq.h 2003-06-29 11:01:17.000000000 +0400
@@ -64,6 +64,13 @@
unsigned int irq_count; /* For detecting broken interrupts */
unsigned int irqs_unhandled;
spinlock_t lock;
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *irq_dir;
+#ifdef CONFIG_SMP
+ unsigned long irq_affinity;
+ struct proc_dir_entry *smp_affinity_entry;
+#endif
+#endif
} ____cacheline_aligned irq_desc_t;
=20
extern irq_desc_t irq_desc [NR_IRQS];

--6TrnltStXW4iwmi0--

--=_courier-15146-1056964994-0001-2
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE/AAEyby9O0+A2ZecRAlrXAJ40+mWPwdSop+R9kDR1s8AZudWFUACgrpZM
UEDfxo1iC5dMB6apB70YaZI=
=MO0I
-----END PGP SIGNATURE-----

--=_courier-15146-1056964994-0001-2--