Re: [Bug report] System lockups on Tyan S2469 and lots of io [smp boot time problems too :(]

Vincent Touquet (vincent.touquet@pandora.be)
Mon, 7 Jul 2003 02:54:49 +0200


On Mon, Jul 07, 2003 at 02:30:07AM +0200, Vincent Touquet wrote:
>PS: will test if the system still locks up soon, I hope not...

So it does lock up again :(((

But now I was able to quickly switch to console and grab the contents of
/var/log/messages before it totally hanged. I can usually tell when the
hang is going to happen: activity on the array stops, then I have a few
more seconds till it hangs completely ....

The message was:

Jul 7 02:45:36 kalimero kernel: 3w-xxxx: scsi0: Unit #0:
command (f7618800) timed out, resetting card.

Then of course, the system totally hangs.

The same problem occurred to me on a Tyan S2468, with a different 3Ware
card. This has to be a kernel problem ... (or BIOS problem, if the S2468
and 2469 BIOSs are sufficiently similar ?).

thanks for any help,

Vincent
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/