Re: Promise SATA 150 TX2 plus

Milan Roubal (roubm9am@barbora.ms.mff.cuni.cz)
Thu, 10 Jul 2003 01:48:17 +0200


Where have you seen this card working? Is any contact to sysadmin of that
system?
I asked support@promise.nl, because I am from Europe and now I had send them
configuration of my system and the problem description, so I will see later
if any sollution come.
Thanx for the answer
Milan Roubal

----- Original Message -----
From: "Marcel J.E. Mol" <marcel@mesa.nl>
To: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
Cc: <linux-kernel@vger.kernel.org>
Sent: Wednesday, July 09, 2003 9:56 PM
Subject: Re: Promise SATA 150 TX2 plus

> On Wed, Jul 09, 2003 at 03:34:51PM +0200, Milan Roubal wrote:
> > Thanks for the answer, it has got PDC 20375, not
> > 20376, but it changes nothing. As Alan mentioned
>
> You could try asking the PROMISE Linux support team
<support@promise.com.tw>
> for their driver. I have seen a working driver on a 20376 chip with just
> one disk connected to it.
>
> -Marcel
>
> > here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=105440080221319&w=2
> > promise has got their own drivers. Have somebody seen
> > this drivers really working? My card is not RAID,
> > its only controller, I want only see the harddrives.
> > Thanx a lot
> > Milan Roubal
> >
> > ----- Original Message -----
> > From: <Mitch@0Bits.COM>
> > To: <linux-kernel@vger.kernel.org>
> > Cc: <roubm9am@barbora.ms.mff.cuni.cz>
> > Sent: Wednesday, July 09, 2003 3:16 PM
> > Subject: Re: Promise SATA 150 TX2 plus
> >
> >
> > >
> > > I believe that is the Promise PDC 20736 controller
> > > for which there is no current driver yet. Search in
> > >
> > > http://marc.theaimsgroup.com/?l=linux-kernel&r=1&b=200307&w=2
> > >
> > > for "20736" and read the thread(s) there.
> > >
> > > Cheers
> > > M
> > >
> > > Milan Roubal wrote:
> > > > Hi,
> > > > I got one card SATA 150 TX2 plus with version v1.00.0.20 on chip.
> > > > I want to make it working under SuSE linux 8.0. I have downloaded
> > > > drivers from www.promise.com, but driver is not working, because of
bad
> > > > major/minor numbers of /dev/sda, /dev/sda1, /dev/sdb, .....
> > > > What are the major/minor numbers for making it work?
> > > >
> > > > Or is there any other driver that I should use for making this card
=
> > > > working?
> > > > What are major/minor numbers for that drivers?
> > > > Thanks very much for your answers.
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
>
> --
> ======-------- Marcel J.E. Mol MESA Consulting
B.V.
> =======--------- ph. +31-(0)6-54724868 P.O. Box 112
> =======--------- marcel@mesa.nl 2630 AC
Nootdorp
> __==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands
____
> They couldn't think of a number, Linux user 1148 --
counter.li.org
> so they gave me a name! -- Rupert Hine -- www.ruperthine.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/