Re: Problems with usb-ohci on 2.4.22-preX

[Ruben Puettmann]

On Sat, Jul 12, 2003 at 09:21:31PM -0700, Greg KH wrote:
 > 
> > i try to install linux on my new motherboard EPOX 8RDA3+ 
> > with nvidia nforce2 chipset.
> > 
> > If I try to attached some usb devices ( usb memory stick ) I got this
> > errors ( 2.4.22-pre5 pre2..): 
> 
> Do any other USB devices work?

soory no no other usb device here. I mean that the internal CF/SD/MMC
reader runs with usb-storage too.

> Can you boot with/without acpi (the opposite of whatever you just did.)

I disable ACPI in bios and boot with noacpi I get the message:

spurious 8259A Interrupt 7

But usb storage seems to work ( the usb-storage found the internal
CF/SD/MMC card reader.

But then the System is frozen. No reaktion from system on attaching the
usb stick or making any keypress. SYSREQ does not work. 

Nothing in the logfiles.

> How about booting with noapic?

I have try this but it will not do :

First try :

booting with noapic :

There were much CPU(0) APIC error's so the System was unusable.

APIC error on CPU0: 40(40)

After disable apic in bios and boot with noapic ext3 can not mount my
filesystem and there is an oops. The oops was not logged so I can't make
an backtrace.

So it seems that the usb-storage problem seems an acpi problem but
without acpi the systems is unusable.

I hope this will help you.

            thx for help

                Ruben

-- 
Ruben Puettmann
[e-mail]
http://www.puettmann.net