Linux-kernel mailing list archive 1999-51,: Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems

# Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems

Alan Cox (alan@lxorguk.ukuu.org.uk)
Wed, 22 Dec 1999 01:42:04 +0000 (GMT)

- Messages sorted by: [ date ][ thread ][ subject ][ author ]
- Next message: Jim Breton: "questions about /proc/sys/net/ipv4/conf/ on 2.2"
- Previous message: Alan Cox: "Re: [NFS] Re: 2.3.30 linuxNFS import is broken (Screwed up NFS/RPC credentials)"
- Next in thread: socket@peakpeak.com: "Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems"
- Reply: socket@peakpeak.com: "Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems"

> the last several months. (Tested with 2.0.38 and 2.2.13) My .config is
> at http://www.peakpeak.com/~socket/config.txt to save traffic space.
>
> kernel: hdb: dma_intr: status=0x71 { DriveReady DeviceFault SeekComplete Error }
^^^^^^^^^^
> kernel: hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=4850553, sector=4850490
^^^^^^^^^^^^^^^^

Thats a read error on /dev/hdb

> This is odd because I mounted /dev/hdc... *not* /dev/hdd. Neither
> tray was open.
>
> Several of these spewed out in the process:
> kernel: hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> kernel: hdd: command error: error=0x50

Could be the drives dont like each other, are one is jumpered for slave and
one for "only device".

Are you sure the hdb message and the hdc/hdd affair are related. The former
looks like it could be a genuine media problem, the hdc/hdd looks stranger

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

- Next message: Jim Breton: "questions about /proc/sys/net/ipv4/conf/ on 2.2"
- Previous message: Alan Cox: "Re: [NFS] Re: 2.3.30 linuxNFS import is broken (Screwed up NFS/RPC credentials)"
- Next in thread: socket@peakpeak.com: "Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems"
- Reply: socket@peakpeak.com: "Re: 2.2.13: ext2, ide-scsi, or possibly hardware problems"