hda: timeout waiting for DMA in 2.2.14pre17

[Larry McVoy]

I'm not sure if this is a bad disk or if the DMA problem is still there.
Can someone tell me which kernel does NOT have the DMA problem and I'll
install that and make sure the problem goes away?

I'm seeing:

    hda: timeout waiting for DMA
    hda: irq timeout: status=0x6c { DriveReady DeviceFault DataRequest CorrectedError }
    hda: DMA disabled
    hdb: DMA disabled
    ide0: reset: success

For what it is worth, I have a spare IDE controller board - if people thought
it was worthwhile, I could put that in and try that.

The machine is a company file server, on a 100Mbit net, 466Mhz celeron.
More config details:

    Main memory size: 192 Mbytes
    1 GenuineIntel  processor
    2 16550A serial ports
    1 /dev/ttyS2 serial port
    1 /dev/ttyS3 serial port
    1 vga+ graphics device
    1 keyboard
    1 ethernet interface
	eth0: 3Com 3c905 Boomerang 100baseTx
    IDE devices:
	/dev/hda is a Maxtor 82559A4, 2441MB w/256kB Cache, DMA
	/dev/hdb is a Maxtor 91303D6, 12427MB w/512kB Cache, UDMA
	/dev/hdc is a IBM-DTTA-351010, 9671MB w/466kB Cache, UDMA
	/dev/hdd is a WDC AC313000R, 12416MB w/512kB Cache, UDMA
    SCSI devices:
	/dev/sr0 is a MATSHITA CD-ROM, model CD-R   CW-7502
    PCI bus devices:
	Host bridge: Intel 440BX - 82443BX Host (rev 3).
	PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
	ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
	IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
	USB Controller: Intel 82371AB PIIX4 USB (rev 1).
	Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
	VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 1).
	Ethernet controller: 3Com 3C905 100bTX (rev 0).
	SCSI storage controller: NCR 53c810 (rev 2).