2.3.36 doesn't boot on my Alpha

[Christian Groessler]

AlphaStation 200 (Avanti)
The SCSI controller is not correct recognized in the newer kernels
(don't know when it started, the last which worked and was tested was
2.3.13
or so..)

This is the boot message:

ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
scsi-ncr53c7,8xx : at PCI bus 0, device 6,  function 0
scsi-ncr53c7,8xx : disabling I/O mapping since base address 0 (0x8000)
        bits 0..1 indicate a non-IO mapping
scsi-ncr53c7,8xx : NCR53c810 at memory 0x2200000, io 0x0, irq 11
scsi0 : not initializing, no I/O or memory mapping known
scsi : 0 hosts.
scsi : detected total.
eth0: DE434/5 at 0x8800 (PCI bus 0, device 11), h/w address
08:00:2b:e4:bf:67,
      and requires IRQ15 (provided by PCI BIOS).
de4x5.c:V0.545 1999/11/28 [e-mail]
request_module[block-major-8]: Root fs not mounted
VFS: Cannot open root device 08:06
Kernel panic: VFS: Unable to mount root fs on 08:06

regards,
chris