Re: PCMCIA still doesn't work for 2.3.46-pre2

[Linus Torvalds]

On Thu, 17 Feb 2000, Richard Gooch wrote:
> 
> Well, at the moment I'm using my other network card with 2.3.46-pre2
> and it's working:
> 
> Linux PCMCIA Card Services 3.1.11
>   options:  [pci] [cardbus] [apm]
> Adding cardbus controller 0: PCI device 104c:ac15
> PCI: Enabling device 00:04.0 (0000 -> 0002)
> Yenta IRQ list 0e98, PCI irq0

Look, now you still don't have a PCI interrupt, but magically the ISA
interrupts _do_ show up.

> The difference seems to be that this card is 16 bit, whereas the other
> card is (it had better be!) 32 bit.

Strange. The ISA interrupts should show up regardless of whether a CardBus
or 16-bit PCMCIA card is inserted. 

I wonder if it matters which card you had at bootup? Ie boot up with the
16-bit card, and then switch to the 32-bit one..

		Linus