> Alan Cox wrote:
> > > > PCMCIA/Cardbus hangs, IRQ problems, Keyboard/mouse problem (may be fixed ?)
> > > sadly not fixed. hangs, oopses, irq, keyboard, mouse, all still faulty in
> > > pre6-3.
> >
> > Is it ok in pre6-5 ?
>
> i'll check and reply, 'bout 45mins.
pre6-5. normal boot, multi-user
nifty:~# cardctl ident
Socket 0:
product info: "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)"
manfid: 0x0143, 0xc0ab
function: 0 (multifunction)
Socket 1:
no product info available
nifty:~# cat /proc/interrupts
CPU0
0: 15786 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 323 XT-PIC pcnet_cs
4: 395 XT-PIC serial
5: 199 XT-PIC ESS Maestro 2E
8: 1 XT-PIC rtc
9: 0 XT-PIC usb-uhci, acpi
13: 1 XT-PIC fpu
14: 2346 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
ERR: 0
nifty:~# cardctl suspend
nifty:~# Apr 24 18:48:21 nifty cardmgr[54]: executing: './network suspend eth0'
Apr 24 18:48:21 nifty cardmgr[54]: executing: './serial suspend ttyS1'
Apr 24 18:48:21 nifty cardmgr[54]: + ./serial: fuser: command not found
nifty:~# cardctl eject
Apr 24 18:48:24 nifty cardmgr[54]: executing: './network check eth0'
Apr 24 18:48:25 nifty cardmgr[54]: executing: './serial check ttyS1'
Apr 24 18:48:25 nifty cardmgr[54]: + ./serial: fuser: command not found
Apr 24 18:48:25 nifty cardmgr[54]: shutting down socket 0
Apr 24 18:48:25 nifty cardmgr[54]: executing: './network stop eth0'
Apr 24 18:48:25 nifty syslogd: sendto: Network is unreachable
Apr 24 18:48:25 nifty cardmgr[54]: executing: './serial stop ttyS1'
Apr 24 18:48:25 nifty cardmgr[54]: + ./serial: fuser: command not found
Apr 24 18:48:25 nifty kernel: tty01 unloaded
Apr 24 18:48:25 nifty cardmgr[54]: executing: 'rmmod 8390'
Apr 24 18:48:25 nifty cardmgr[54]: + 8390: No such file or directory
Apr 24 18:48:25 nifty cardmgr[54]: rmmod exited with status 1
card is physically ejected at this point and the machine locks up solidly, no serial
activity, no keyboard, no nothing.
-----------------------------
however, do a normal shutdown -hf now, and the machine does -NOT- hang if you pull
the card out after it is 'halted'. (numblock still toggles)
-----------------------------
boot with init=/bin/bash, card ejected.
insert card, lose keyboard, machine no longer repsonds, numlock is also dead.
-----------------------------
-d
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/