I'm having something like this problem under 2.3.51 and had it using
2.3.99-pre6 as well with the ide-to-scsi emulation.
Curiously enough, I _didn't_ have it at home, only at work; home is a
K6-200 of no particular pedigree, work is a Dell OptiPlex GX110. The
thing which occurs to me is that something is going flakely with the
ATA66 bus in the Dell, but I have no clue what to check.
The most recent actual error message was:
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id
1, lun 0 0x42 02 40 00 00 00 00 00 30 00
hdd: lost interrupt
ide-scsi: CoD != 0 in idescsi_pc_intr
hdd: ATAPI reset complete
hdd: irq timeout: status=0x80 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0x80 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0x80 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
-- Graydon Saunders | Nine Tarn Bourne Ministry of Tourism and Recreation angantyr@ | Offices in Braemor, As-hkes, Landhaven, and Wirthane sympatico.ca | "It's not a visit without a honk-spearing in it!"- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/