%%
%% Esimerkki liitteiden käytöstä
%%
%\internalappendix{\theappendix}{Eka liite}
%
%Ensimmäinen liite
%
%\internalappendix{2}{Toka liite}
%
%Toinen liite

\internalappendix{\theappendix}{Working hour lists}

The categories used at the lists are the following:

PROJ : Project planning
REQU : Requirements analysis
DESI : Design
IMPL : Implementation
TEST : Testing
OTPR : Other products
MEET : Meetings
INST : Installation and maintenance procedures
KNOW : Get-to-know the problem scope and environment
OTHE : Other tasks
USIN : User interface design

\newpage

\textbf{Marja Hassinen}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
17.5.2005 & INST & 3.5 & Studying Fortran \\
17.5.2005 & MEET & 1.0 & Meeting with the project group \\
17.5.2005 & INST & 0.5 & Studying how to use CVS \\
17.5.2005 & INST & 0.5 & Writing content to the web page \\
18.5.2005 & INST & 2.0 & Studying Fortran \\
18.5.2005 & OTHE & 0.5 & Reading project instructions \\
19.5.2005 & MEET & 2.5 & Meeting with the project group \\
19.5.2005 & PROJ & 0.5 & Writing about listing the working hours \\
19.5.2005 & INST & 0.5 & Studying how to use CVS \\
19.5.2005 & INST & 0.5 & Studying how to use the report.pl-script \\
19.5.2005 & INST & 1.0 & Studying how to use LaTeX \\
19.5.2005 & PROJ & 1.0 & Writing the project plan (Project organization) \\
20.5.2005 & PROJ & 1.0 & Writing the project plan (Schedule) \\
20.5.2005 & MEET & 2.5 & Meeting with the client and the project group \\
23.5.2005 & MEET & 2.0 & Meeting with the project group \\
23.5.2005 & PROJ & 1.0 & Writing the project plan (Schedule) \\
23.5.2005 & INST & 0.5 & Studying how to use LaTeX \\
23.5.2005 & REQU & 1.0 & Reading the IEEE SRS document \\
24.5.2005 & MEET & 2.0 & Meeting with the client and the project group \\
24.5.2005 & INST & 1.0 & Studying Fortran \\
25.5.2005 & MEET & 2.0 & Meeting with the project group \\
25.5.2005 & MEET & 0.5 & Writing notes of the meating into a file \\
25.5.2005 & PROJ & 0.5 & Writing the project plan \\
26.5.2005 & INST & 2.0 & Studying Fortran \\
27.5.2005 & PROJ & 1.0 & Reading the project plan and marking errors \\
27.5.2005 & MEET & 2.0 & Meeting with the project group (reviewing the project plan) \\
27.5.2005 & PROJ & 0.5 & Correcting grammatical mistakes of the plan (with Eemil) \\
29.5.2005 & REQU & 0.5 & Preparing the next meeting \\
29.5.2005 & KNOW & 0.5 & Reading about Markov random fields \\
30.5.2005 & MEET & 2.0 & Meeting with the project group and the client \\
30.5.2005 & PROJ & 1.5 & Reading about the FP method and calculating FP's \\
31.5.2005 & REQU & 2.0 & Specifying requirements with the project group \\
31.5.2005 & REQU & 1.5 & Writing the SRS (data \& simulation) \\
1.6.2005 & MEET & 2.0 & Meeting with the project group \\
1.6.2005 & REQU & 1.0 & Writing the SRS \\
1.6.2005 & INST & 0.5 & Studying Fortran \\
2.6.2005 & MEET & 2.0 & Meeting with the group and the client \\
2.6.2005 & REQU & 1.0 & Writing the SRS (adding requirements) \\
3.6.2005 & INST & 2.0 & Studying Fortran \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
4.6.2005 & INST & 1.0 & Studying Fortran \\
5.6.2005 & REQU & 0.5 & Writing the SRS (Glossary) \\
6.6.2005 & REQU & 2.0 & Writing the SRS (Glossary \& Requirements)\\
6.6.2005 & MEET & 2.0 & Meeting with the group and the client \\
7.6.2005 & REQU & 2.0 & Specifying requirements with the project group \\
7.6.2005 & REQU & 2.5 & Writing the SRS (Requirements) \\
8.6.2005 & MEET & 2.0 & Meeting with the project group (requ..) \\
8.6.2005 & REQU & 1.5 & Writing the SRS (Requ \& Gloss) \\
9.6.2005 & MEET & 2.0 & Meeting with the project group and the client \\
9.6.2005 & REQU & 1.0 & Writing the SRS (correcting errors) \\
10.6.2005 & MEET & 2.0 & Meeting with the project group \\
10.6.2005 & REQU & 0.5 & Correcting errors in SRS \\
13.6.2005 & MEET & 2.0 & Meeting with the group \\
13.6.2005 & OTHE & 0.5 & Reporting working hours (statistics, metrics system) \\
13.6.2005 & REQU & 1.0 & Writing the SRS \\
13.6.2005 & INST & 0.5 & Studying Fortran \\
14.6.2005 & DESI & 0.5 & Designing the simulation parameter input form \\
14.6.2005 & OTHE & 0.5 & Reporting working hours (problems with the system) \\
14.6.2005 & MEET & 2.0 & Meeting with the project group \\
14.6.2005 & REQU & 1.0 & Reading the SRS \\
14.6.2005 & DESI & 0.5 & Reading the IEEE SDD document \\
15.6.2005 & MEET & 1.0 & Meeting with the project group \\
15.6.2005 & DESI & 1.0 & Designing the simtech input formats with Eemil \\
15.6.2005 & DESI & 0.5 & Reading the IEEE SDD document \\
15.6.2005 & DESI & 0.5 & Designing the simtech input formats \\
16.6.2005 & DESI & 1.0 & Designing the simtech input formats \\
16.6.2005 & INST & 1.5 & Studying Fortran \\
17.6.2005 & MEET & 2.0 & Review (SRS) \\
17.6.2005 & REQU & 1.0 & Correcting errors in SRS \\
20.6.2005 & DESI & 1.0 & Reading \& designing the simtech input formats \\
20.6.2005 & INST & 1.0 & Studying Fortran \\
20.6.2005 & MEET & 2.0 & Meeting with the project group \\
21.6.2005 & DESI & 4.0 & Designing the prototype (with Eemil) \\
21.6.2005 & DESI & 1.0 & Designing the prototype \\
21.6.2005 & INST & 0.5 & Studying Fortran \\
22.6.2005 & INST & 1.0 & Studying Fortran \\
22.6.2005 & DESI & 0.5 & Designing the prototype \\
22.6.2005 & MEET & 2.0 & Meeting with the project group \\
23.6.2005 & DESI & 4.0 & Designing \& coding the prototype (with Eemil) \\
27.6.2005 & DESI & 1.0 & Designing the prototype (pictures and some minor changes) \\
27.6.2005 & DESI & 1.0 & Reading about NAG and finding some routines \\
27.6.2005 & MEET & 2.0 & Meeting with the project group \\
27.6.2005 & DESI & 0.5 & Reading notes etc. \\
28.6.2005 & DESI & 4.0 & Designing \& coding the prototype (with Eemil) \\
29.6.2005 & DESI & 1.5 & Writing the design document \\
29.6.2005 & MEET & 2.0 & Meeting with the project group \\
29.6.2005 & DESI & 1.0 & Coding the prototype (with Eemil) \\
30.6.2005 & DESI & 2.0 & Coding the prototype  \\
1.7.2005 & MEET & 2.0 & Meeting with the project group \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
18.7.2005 & OTHE & 0.5 & Miscellaneous \\
18.7.2005 & DESI & 1.0 & Coding \& documenting the prototype \\
18.7.2005 & INST & 0.5 & Studying Fortran \\
18.7.2005 & MEET & 2.0 & Meeting with the project group \\
18.7.2005 & DESI & 1.0 & Discussing the protype \& designing the generator: probabilities \\
19.7.2005 & DESI & 2.0 & Writing the design document (probabilities) at school \\
19.7.2005 & DESI & 1.5 & Writing the design document (probabilities) at home \\
19.7.2005 & INST & 1.0 & Reading about NAG and trying to get it work \\
20.7.2005 & MEET & 0.5 & Meeting with the client \\
20.7.2005 & DESI & 1.0 & Coding the prototype (with Eemil) \\
20.7.2005 & MEET & 2.5 & Meeting with the project group \\
20.7.2005 & DESI & 1.0 & Reading and writing the design document \\
20.7.2005 & DESI & 0.5 & Discussing the linking \\
20.7.2005 & DESI & 0.5 & Writing the design document (linking) \\
21.7.2005 & DESI & 0.5 & Creating prototype definition files (model, simtech parameters, data) \\
21.7.2005 & DESI & 3.0 & Coding the prototype \& writing the design document, discussing design (at school) \\
21.7.2005 & DESI & 2.0 & Correcting errors in prototype (problems with NAG) \\
22.7.2005 & MEET & 2.0 & Meeting with the project group \\
22.7.2005 & DESI & 1.5 & Debugging the prototype (it works!) \\
22.7.2005 & DESI & 3.0 & Writing the design document \\
25.7.2005 & DESI & 1.0 & Reading the design document \\
25.7.2005 & MEET & 1.0 & Meeting with the project group \\
25.7.2005 & DESI & 2.0 & Writing the design document (model desciption language) at school \\
25.7.2005 & DESI & 1.0 & Writing the design document at home \\
25.7.2005 & TEST & 1.0 & Reading and writing the testing document \\
26.7.2005 & TEST & 0.5 & Discussing testing. \\
26.7.2005 & DESI & 1.0 & Discussing design and reading and writing the design document.  \\
26.7.2005 & IMPL & 1.0 & Discussing implementation and writing Distribution.java. \\
26.7.2005 & IMPL & 0.5 & Writing Distribution.java (finished). \\
26.7.2005 & DESI & 0.5 & Reading the design document \\
27.7.2005 & MEET & 1.0 & Meeting with the project group \\
27.7.2005 & DESI & 1.0 & Correcting error in Design document \\
27.7.2005 & IMPL & 1.0 & Implementing Distribution subclasses \\
27.7.2005 & IMPL & 1.5 & Implementing Distribution subclasses and Variable setters \\
27.7.2005 & INST & 0.5 & Installing Java 1.5 and reading about the new features \\
28.7.2005 & IMPL & 2.5 & Implementing Distribution subclasses \\
28.7.2005 & TEST & 0.5 & Trying to unit test Distribution subclasses (problems with everything) \\
28.7.2005 & TEST & 0.5 & Unit testing Distribution subclasses (seems ok) \\
28.7.2005 & IMPL & 0.5 & Discussing implementation and adding features to DistributionFactory \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
29.7.2005 & MEET & 1.0 & Meeting with the project group \\
29.7.2005 & IMPL & 2.0 & Correcting miscellaneuous errors in data structures and implementing generateAcceptationFormula \\
29.7.2005 & IMPL & 2.0 & Implementing generateAcceptationFormula \\
31.7.2005 & IMPL & 1.5 & Implementing generateAcceptationFormula \\
1.8.2005 & IMPL & 0.5 & Implementing generateUpdateFunctionalCode \\
1.8.2005 & MEET & 1.0 & Meeting with the project group \\
1.8.2005 & IMPL & 1.0 & Implementing generateUpdateFunctionalCode \\
1.8.2005 & IMPL & 1.5 & Implementing generateUpdateFunctionalCode \\
2.8.2005 & DESI & 1.5 & Reading the design document and discussing the FTR \\
2.8.2005 & IMPL & 1.0 & Implementing generateUpdateFunctionalCode \\
2.8.2005 & TEST & 1.0 & Writing a test program for generateAcceptationFormula (problems with other modules) \\
3.8.2005 & IMPL & 1.0 & Adding features to generateFunctionalNewValuesCode \\
3.8.2005 & MEET & 1.0 & FTR for design document \\
3.8.2005 & DESI & 0.5 & Correcting errors in design document \\
3.8.2005 & IMPL & 1.0 & Discussing implementation and testing \\
3.8.2005 & TEST & 1.0 & Testing generateAcceptationFormula and correcting bugs. \\
4.8.2005 & IMPL & 1.0 & Correcting errors in generateAcceptationFormula \\
4.8.2005 & TEST & 1.0 & Testing generateAcceptationFormula \\
4.8.2005 & TEST & 1.0 & Testing generateFunctionalNewValuesCode and correcting errors \\
4.8.2005 & IMPL & 0.5 & Adding features to generateFunctionalNewValuesCode \\
4.8.2005 & IMPL & 0.5 & Discussing implementation \\
4.8.2005 & IMPL & 0.5 & Changing distributions and generator to utilize ArrayList<String>s. \\
5.8.2005 & MEET & 1.5 & Meeting with the project group \\
5.8.2005 & TEST & 0.5 & Testing the generateFunctionalNewvaluesCode \\
5.8.2005 & IMPL & 1.5 & Discussing implementation, adding features to prototype, adding new methods. \\
7.8.2005 & IMPL & 1.5 & Implementing generateProposal \\
8.8.2005 & IMPL & 1.0 & Implementing generateNewValueCode and generateAcceptationCode \\
8.8.2005 & MEET & 1.5 & Meeting with the project group \\
8.8.2005 & IMPL & 1.5 & Refactoring generateAcceptationFormula and the methods it uses \\
8.8.2005 & IMPL & 1.0 & Refactoring generateAcceptationFormula and generateNewValuesFunctionalCode \\
9.8.2005 & IMPL & 1.5 & Implementing generateNewValuesFunctionalCode and the methods it uses \\
9.8.2005 & IMPL & 0.5 & Correcting errors in generator classes \\
9.8.2005 & TEST & 0.5 & Generating test cases and testing generateAcceptationFormula (doesn't work) \\
9.8.2005 & IMPL & 1.0 & Correcting errors in generateAcceptationFormula \\
9.8.2005 & IMPL & 0.5 & Implementing generateAcceptationCode \\
10.8.2005 & IMPL & 2.0 & Correcting miscellaneous programming errors in Generator (now it can be compiled but not yet run) \\
10.8.2005 & OTHE & 2.0 & Attending the lecture about testing \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
11.8.2005 & MEET & 2.0 & Meeting with the project group \\
11.8.2005 & IMPL & 2.0 & Discussing implementation and implementing Output \\
12.8.2005 & IMPL & 2.0 & Implementing Output \\
12.8.2005 & IMPL & 0.5 & Correcting miscellaneous programming errors in Generator (now it can be run.. wow!) \\
12.8.2005 & TEST & 0.5 & Testing the generator \\
15.8.2005 & IMPL & 1.0 & Correcting errors in Output and Proposal. Writing javadoc comments. \\
15.8.2005 & TEST & 1.0 & Writing the testing document (test models etc.) and thinking about testing \\
15.8.2005 & TEST & 0.5 & Trying to get the produced Fortran code to compile \\
15.8.2005 & MEET & 3.0 & Meeting with the project group \\
15.8.2005 & TEST & 0.5 & Hunting a Mysterious Bug \\
15.8.2005 & IMPL & 0.5 & Correcting the Mysterious Bug \\
16.8.2005 & IMPL & 0.5 & Refining the generateWriteOutput class \\
16.8.2005 & TEST & 0.5 & Writing testing document (models) \\
16.8.2005 & TEST & 2.5 & Testing Acceptation, writing the testing document (at school) \\
16.8.2005 & TEST & 1.0 & Testing Acceptation, writing the testing document (at home) \\
17.8.2005 & TEST & 1.0 & Testing Acceptation, writing the testing document (at home) \\
17.8.2005 & TEST & 2.0 & Testing Acceptation, writing the testing document (at home) \\
17.8.2005 & TEST & 1.0 & Discussing miscellaneous errors and features recently found and correcting them \\
18.8.2005 & MEET & 2.0 & Meeting with the project group \\
22.8.2005 & OTHE & 0.5 & Reading e-mail and generating the week report. \\
23.8.2005 & OTHE & 1.0 & Reading the manual \\
23.8.2005 & TEST & 1.0 & Reading the source code (Acceptation) and discussing found bugs and other implementation things \\
23.8.2005 & MEET & 3.0 & Meeting with the project group \\
23.8.2005 & TEST & 0.5 & Reading the generated source code for cancer model and looking for bugs. Didn't find any. \\
23.8.2005 & IMPL & 0.5 & Adding features and discussing implementation (problems with functional parameters - again) \\
24.8.2005 & TEST & 0.5 & Testing Acceptation with cancer model \\
24.8.2005 & TEST & 3.0 & Testing Acceptation with model\_all\_func \\
24.8.2005 & OTPR & 1.0 & Correcting errors in the manual (problems with cvs and everything), discussing the CD, viewing its contents \\
24.8.2005 & TEST & 0.5 & Testing Acceptation and discussing its implementation \\
25.8.2005 & TEST & 1.5 & Testing Acceptation with the spatial case and writing the testing document \\
25.8.2005 & OTPR & 0.5 & Writing the manual and discussing the implementation document \\
25.8.2005 & OTPR & 0.5 & Creating a user\_dist.f90 to be delivered to the customer, reading documents \\
25.8.2005 & TEST & 1.0 & Writing the testing document \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
26.8.2005 & MEET & 1.0 & Meeting with the project group \\
26.8.2005 & IMPL & 2.5 & Writing the implementation document (requirements \& further development) \\
26.8.2005 & OTPR & 1.0 & Writing the conclusion document (schedule, risks, products) \\
26.8.2005 & TEST & 0.5 & Reading and writing the testing document \\
26.8.2005 & OTPR & 0.5 & Writing the what have I learned thing \\
28.8.2005 & IMPL & 0.5 & Writing the implementation document \\
28.8.2005 & OTPR & 0.5 & Writing the conclusion document and what have I learned thing \\
28.8.2005 & IMPL & 0.5 & Discussing implementation (efficiency issues) and reading the parser source code \\
28.8.2005 & TEST & 1.0 & System testing with the bird model (the proposal distributions are so messed up that the program simply can't work) \\
29.8.2005 & TEST & 1.0 & System testing with the bird model (added debug prints etc) \\
29.8.2005 & MEET & 1.0 & Meeting with the project group \\
29.8.2005 & IMPL & 1.0 & Writing the implementation document \\
29.8.2005 & OTPR & 0.5 & Writing the conclusion document \\
30.8.2005 & IMPL & 0.5 & Removing debug prints from the generator and correcting errors in the implementation document \\
30.8.2005 & IMPL & 1.0 & Reading the implementation document \\
30.8.2005 & TEST & 0.5 & Reading the testing document and the conclusion document \\
31.8.2005 & MEET & 1.5 & Meeting with the project group \\
31.8.2005 & IMPL & 1.0 & Correcting errors in the implementation document \\
31.8.2005 & OTPR & 1.0 & Writing the conclusion document and the testing document \\
31.8.2005	& OTPR & 0.5 & Inspecting the CD \\
\hline
\end{tabular}


\newpage
\textbf{Eemil Lagerspetz}


\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
17.05.2005 & MEET & 1.0 & Official meeting \\
17.05.2005 & INST & 3.0 & Project homepage, latex-install, CVS-install \\
17.05.2005 & INST & 1.0 & TortoiseCVS-tutorial, etc \\
18.05.2005 & INST & 2.0 & CVS and binary files, rewriting the tutorial \\
19.05.2005 & MEET & 2.5 & Official meeting \\
19.05.2005 & INST & 2.0 & reorganizing CVS among other things \\
19.05.2005 & PROJ & 3.0 & Writing about the risks \\
19.05.2005 & INST & 1.0 & Learning about LaTeX \\
20.05.2005 & MEET & 2.5 & Official meeting \\
20.05.2005 & PROJ & 1.0 & Writing about communication and data storage \\
23.05.2005 & MEET & 2.0 & Official meeting \\
23.05.2005 & PROJ & 2.0 & Writing parts of the planning document \\
24.05.2005 & MEET & 2.0 & Official meeting \\
24.05.2005 & PROJ & 3.0 & Discussing risks with the project manager \\
25.05.2005 & MEET & 2.0 & Official meeting \\
25.05.2005 & PROJ & 1.0 & Tweaking the risks \\
25.05.2005 & PROJ & 2.0 & Adding more content to the risks \\
25.05.2005 & INST & 2.0 & Configuring a backup CVS server for emergencies \\
27.05.2005 & PROJ & 1.0 & Reading up for the review of the project plan \\
27.05.2005 & PROJ & 1.0 & Correcting some errors in the project plan \\
27.05.2005 & PROJ & 0.5 & Fixing grammatical errors in the project plan \\
30.05.2005 & MEET & 2.0 & Official meeting \\
30.05.2005 & PROJ & 2.0 & Writing about testing \\
31.05.2005 & REQU & 2.0 & Meeting to discuss requirements and use cases \\
31.05.2005 & REQU & 1.0 & Writing the first draft of the use cases \\
31.05.2005 & REQU & 3.0 & Discussing and writing the requirements \\
01.06.2005 & MEET & 2.0 & Official meeting \\
01.06.2005 & REQU & 2.0 & Working on the use cases and requirements \\
02.06.2005 & MEET & 2.0 & Official meeting \\
06.06.2005 & MEET & 2.0 & Official meeting \\
06.06.2005 & REQU & 1.0 & Adding requirement Stabilities and Ids \\
07.06.2005 & REQU & 2.0 & Meeting on the srs \\
07.06.2005 & REQU & 4.0 & Copying and styling diagrams for the srs \\
08.06.2005 & MEET & 2.0 & Official meeting \\
08.06.2005 & REQU & 4.0 & Drawing system models, writing glossary \\
09.06.2005 & REQU & 2.0 & Meeting on the requirements \\
10.06.2005 & MEET & 2.0 & Official meeting \\
11.06.2005 & REQU & 2.0 & Redrawing diagrams, writing model description \\
13.06.2005 & MEET & 2.0 & Official meeting \\
13.06.2005 & REQU & 2.0 & modifying diagrams, fixing some srs errors \\
14.06.2005 & DESI & 2.0 & Calculation example meeting \\
14.06.2005 & REQU & 1.0 & Reading up for the SRS inspection \\
15.06.2005 & MEET & 2.0 & Official meeting \\
17.06.2005 & REQU & 3.0 & SRS document inspection \\
\hline
\end{tabular}


\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
17.06.2005 & REQU & 2.0 & Correcting the SRS \\
17.06.2005 & DESI & 2.0 & Writing the design document \\
20.06.2005 & MEET & 2.0 & Official meeting \\
21.06.2005 & DESI & 5.5 & Designing the prototype, etc. \\
22.06.2005 & MEET & 2.0 & Official meeting \\
23.06.2005 & DESI & 4.0 & Designing the prototype \\
27.06.2005 & MEET & 2.0 & Official meeting \\
27.06.2005 & DESI & 1.0 & Meeting up with the customer about blocking \\
27.06.2005 & DESI & 1.0 & Structuring up and modifying the design doc \\
28.06.2005 & DESI & 4.0 & Designing the prototype, writing the dd \\
28.06.2005 & DESI & 6.0 & Making the prototype runnable \\
29.06.2005 & MEET & 2.0 & Official meeting \\
29.06.2005 & DESI & 1.0 & Redesigning the prototype internals \\
29.06.2005 & DESI & 1.5 & Fixing prototype bugs \\
01.07.2005 & MEET & 2.0 & Official meeting \\
18.07.2005 & MEET & 2.0 & Official meeting \\
19.07.2005 & DESI & 2.0 & Designing at the department \\
19.07.2005 & DESI & 1.0 & Designing at home \\
20.07.2005 & DESI & 0.5 & Meeting on the prototype with the customer \\
20.07.2005 & DESI & 1.0 & Modifying the prototype for the new model \\
20.07.2005 & DESI & 2.5 & Design meeting \\
20.07.2005 & INST & 1.0 & Implementing subsubsubsection \\
20.07.2005 & DESI & 1.0 & Modifying the prototype \\
21.07.2005 & DESI & 3.0 & Modifying the prototype \\
21.07.2005 & DESI & 0.5 & Debugging the prototype \\
22.07.2005 & MEET & 2.0 & Official meeting \\
22.07.2005 & DESI & 1.5 & Debugging the prototype \\
22.07.2005 & DESI & 3.0 & Writing the design document \\
23.07.2005 & DESI & 2.0 & Writing the design document \\
25.07.2005 & MEET & 1.0 & Meeting with the project group \\
25.07.2005 & DESI & 2.0 & Designing the parser \\
25.07.2005 & DESI & 3.0 & Designing the parser(at home) \\
26.07.2005 & TEST & 0.5 & Discussing testing \\
26.07.2005 & DESI & 1.0 & Discussing design, writing the design document \\
26.07.2005 & IMPL & 1.0 & Discussing implementation and writing the parser \\
26.07.2005 & DESI & 2.0 & Reading the design document for the review 27.07 \\
27.07.2005 & DESI & 1.0 & The review \\
27.07.2005 & DESI & 2.0 & Correcting the SDD, writing the parser \\
27.07.2005 & DESI & 2.0 & Correcting the SDD, writing the parser(at home) \\
28.07.2005 & IMPL & 6.0 & Writing the parser and other classes \\
29.07.2005 & DESI & 1.0 & Putting up stuff into the Design document \\
29.07.2005 & IMPL & 2.0 & Implementing the Parser \\
29.07.2005 & IMPL & 2.5 & Implementing the Parser(at home) \\
30.07.2005 & IMPL & 4.0 & Implementing the Parser(at home) \\
31.07.2005 & DESI & 1.0 & Reading the SDD for the review on 03.08 \\
01.08.2005 & MEET & 2.0 & Meeting with the project group \\
01.08.2005 & IMPL & 2.0 & Implementing the Parser(at home) \\
02.08.2005 & IMPL & 4.0 & Implementing the Parser and fixing bugs \\
02.08.2005 & IMPL & 3.0 & Implementing the Parser and fixing bugs \\
03.08.2005 & MEET & 0.5 & Official review of the SDD \& meeting \\
03.08.2005 & IMPL & 1.5 & Fixing bugs and tweaking the parser \\
\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
03.08.2005 & IMPL & 1.0 & Fixing bugs and tweaking the parser(at home) \\
04.08.2005 & IMPL & 3.0 & Finishing the Parser and tweaking the prototype \\
05.08.2005 & MEET & 1.5 & Meeting with the project group \\
05.08.2005 & IMPL & 1.5 & Adding features to the prototype \\
05.08.2005 & IMPL & 3.0 & Adding features to the prototype and Parser \\
08.08.2005 & MEET & 1.5 & Meeting with the project group \\
08.08.2005 & IMPL & 1.5 & Adding proposal strategy to the parser, repackaging \\
08.08.2005 & IMPL & 4.0 & Fixing FortranWriter, implementing generateReadData \\
09.08.2005 & MEET & 1.0 & Meeting with the customer about new example models \\
09.08.2005 & IMPL & 3.0 & Writing Input.java \\
10.08.2005 & OTHE & 2.0 & On Taina's testing lecture \\
10.08.2005 & IMPL & 4.0 & Finishing Input, fixing FortranWriter indenting \\
11.08.2005 & MEET & 2.0 & Meeting with the project group \\
11.08.2005 & IMPL & 3.0 & Implementing the spatial part of Acceptation.java \\
12.08.2005 & IMPL & 2.0 & Implementing generateSetFunctional \\
15.08.2005 & MEET & 3.0 & Official meeting \\
15.08.2005 & TEST & 5.0 & Writing the Testing document \\
16.08.2005 & TEST & 2.5 & Meeting \& Writing tests for parseVariable \\
16.08.2005 & TEST & 5.0 & Writing tests for parseVariable and the testing doc \\
17.08.2005 & TEST & 2.0 & Writing the testing document and discussing features \\
17.08.2005 & TEST & 5.0 & Ironing out bugs and bettering Output.java \\
18.08.2005 & TEST & 2.0 & Official meeting \& finding a bug \\
19.08.2005 & TEST & 2.0 & Fixing the bug (functionals now update correctly) \\
19.08.2005 & TEST & 3.0 & Testrunning on the cancer model, fixing misc. bugs \\
20.08.2005 & OTPR & 1.0 & Javadocing the classes, writing the manual glossary \\
22.08.2005 & TEST & 2.0 & Made the MasterTest class and ispelled the manual \\
23.08.2005 & MEET & 3.0 & Meeting with the project group \\
23.08.2005 & OTPR & 4.0 & Correcting the manual. \\
24.08.2005 & MEET & 3.0 & Meeting with the project group and another with the customer \\
24.08.2005 & TEST & 2.0 & Writing the testing document \\
24.08.2005 & OTPR & 3.0 & Making a handy script for project release \\
25.08.2005 & TEST & 1.0 & Incorporating tests into MasterTest \\
25.08.2005 & OTPR & 2.0 & Writing the manual and modifying the Generator \\
25.08.2005 & OTPR & 4.0 & Writing the manual and the cdrom script \\
26.08.2005 & MEET & 1.0 & Meeting with the project group \\
26.08.2005 & TEST & 2.5 & Testing the missing values handling in the generated simulation \\
26.08.2005 & OTPR & 1.0 & put CD-ROM to the web page and other stuff  \\
26.08.2005 & OTPR & 2.0 & Checked the manual, testing doc, wrote some of the impl. doc \\
28.08.2005 & TEST & 4.0 & Fixed some latent bugs and refactored stuff. The bird model doesn't work yet. \\
29.08.2005 & MEET &  1.0 &  Meeting with the project group \\
29.08.2005 & OTPR &  2.0 &  Wrote some of the implementation document \\
30.08.2005 & OTPR &  2.0 &  Wrote some of the impl doc \\
30.08.2005 & OTPR &  1.0 &  Reading impl., conc., test. docs for review \\
31.08.2005 & MEET &  1.5 &  Meeting and review of the docs \\
31.08.2005 & OTPR &  1.5 &  Correcting the documents \\
\hline
\end{tabular}

\newpage

\textbf{Joonas Kukkonen}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
17.5.2005 & MEET & 1.0 & Group meeting \\
17.5.2005 & INST & 2.0 & Fortran, CVS, Latex, plus other documents \\
18.5.2005 & INST & 2.0 & Studying Fortran \\
19.5.2005 & MEET & 1.0 & Planning a meeting \\
19.5.2005 & MEET & 2.0 & Group meeting \\
19.5.2005 & INST & 1.0 & Installing CVS \\
20.5.2005 & MEET & 1.0 & Planning a meeting \\
20.5.2005 & MEET & 2.5 & Meeting with the client \\
22.5.2005 & OTHE & 2.0 & Learning to use LaTeX \\
22.5.2005 & PROJ & 1.5 & Writing Project Plan \\
23.5.2005 & MEET & 2.0 & Project leader meeting \\
23.5.2005 & MEET & 2.0 & Group meeting \\
23.5.2005 & OTHE & 1.0 & Writing week report, planning next meeting \\
24.5.2005 & MEET & 2.0 & Meeting with the client \\
24.5.2005 & PROJ & 2.0 & Writing introduction and helping with risks \\
25.5.2005 & MEET & 2.0 & Group meeting \\
25.5.2005 & PROJ & 1.0 & Risk analysis \\
26.5.2005 & KNOW & 1.0 & Reading IEEE SRS \\
26.5.2005 & MEET & 1.0 & Planning next meeting \\
27.5.2005 & MEET & 2.0 & Group meeting \\
27.5.2005 & PROJ & 1.0 & Reviewing the project plan \\
30.5.2005 & MEET & 1.0 & Planning the meeting \\
30.5.2005 & MEET & 2.0 & Meeting with the client \\
30.5.2005 & OTHE & 1.0 & Email, Fortran NAG libraries, etc \\
31.5.2005 & REQU & 3.0 & Requirements analysis \\
1.6.2005 & MEET & 0.5 & Planning the meeting \\
1.6.2005 & MEET & 2.0 & Group meeting \\
1.6.2005 & REQU & 1.0 & Reviewing requirements, drawing ER model \\
2.6.2005 & MEET & 0.5 & Planning the meeting \\
2.6.2005 & MEET & 2.0 & Meeting with the client \\
2.6.2005 & INST & 1.0 & Studying Fortran \\
5.6.2005 & OTHE & 1.0 & Email, reading SRS, planning next meeting \\
6.6.2005 & MEET & 2.0 & Meeting with the client \\
6.6.2005 & OTHE & 1.0 & Weekly report, studying fortran \\
7.6.2005 & MEET & 0.5 & Planning the meeting \\
7.6.2005 & MEET & 2.0 & Group meeting \\
8.6.2005 & MEET & 0.5 & Planning the meeting \\
8.6.2005 & MEET & 2.0 & Group meeting \\
9.6.2005 & REQU & 2.0 & Drawing models, writing SRS \\
9.6.2005 & MEET & 0.5 & Planning the meeting \\
9.6.2005 & MEET & 2.0 & Meeting with the client \\
10.6.2005 & REQU & 2.0 & Writing and reading SRS \\
10.6.2005 & MEET & 0.5 & Planning the meeting \\
10.6.2005 & MEET & 2.0 & Group meeting \\
\hline
\end{tabular}


\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
13.6.2005 & MEET & 0.5 & Planning the meeting \\
13.6.2005 & MEET & 2.0 & Group meeting \\
13.6.2005 & OTHE & 0.5 & Weekly report, metric system and hours \\
14.6.2005 & MEET & 0.5 & Planning the meeting \\
14.6.2005 & MEET & 2.0 & Group meeting \\
14.6.2005 & DESI & 0.5 & Planning the modelling language \\
15.6.2005 & MEET & 0.5 & Planning the meeting \\
15.6.2005 & MEET & 1.0 & Group meeting \\
15.6.2005 & DESI & 1.0 & Planning the modeling language with Anni \\
16.6.2005 & DESI & 0.5 & Reading planed simtech input formats and modeling languge \\
16.6.2005 & REQU & 1.0 & Reading the SRS \\
16.6.2005 & INST & 1.0 & Studying Fortran \\
17.6.2005 & MEET & 1.0 & Planning the meeting \\
17.6.2005 & MEET & 2.0 & Review (SRS) \\
19.6.2005 & REQU & 1.0 & Writing SRS \\
19.6.2005 & DESI & 1.0 & Planning the system \\
20.6.2005 & MEET & 0.5 & Planning the meeting \\
20.6.2005 & MEET & 2.0 & Meeting with the project group \\
20.6.2005 & OTHE & 0.5 & Writing weekly report, etc \\
21.6.2005 & DESI & 2.0 & Designing data structures \\
22.6.2005 & MEET & 0.5 & Planning the meeting \\
22.6.2005 & MEET & 2.0 & Meeting with the project group \\
22.6.2005 & DESI & 1.0 & Designing data structures \\
23.6.2005 & INST & 1.0 & Studying Fortran \\
26.6.2005 & DESI & 3.0 & Designing the generator, drawing models \\
26.6.2005 & OTHE & 1.0 & Reviewing risks, requirements and reading documets \\
27.6.2005 & MEET & 0.5 & Planning the meeting \\
27.6.2005 & MEET & 2.0 & Meeting with the project group \\
27.6.2005 & MEET & 1.0 & Meeting with Marko Salmenkivi \\
27.6.2005 & OTHE & 0.5 & Writing weekly report, etc \\
28.6.2005 & DESI & 3.0 & Designing datastructures and drawing models \\
29.6.2005 & MEET & 0.5 & Planning the meeting \\
29.6.2005 & MEET & 2.0 & Meeting with the project group \\
29.6.2005 & DESI & 1.0 & Designing datastructures and drawing models \\
30.6.2005 & DESI & 1.0 & Reading design document \\
30.6.2005 & DESI & 2.0 & Designing generator \\
1.7.2005 & MEET & 0.5 & Planning the meeting \\
1.7.2005 & MEET & 2.0 & Meeting with the project group \\
1.7.2005 & DESI & 1.0 & Designing generator \\
18.7.2005 & MEET & 0.5 & Planning the meeting \\
18.7.2005 & MEET & 2.0 & Meeting with the project group \\
18.7.2005 & OTHE & 0.5 & Writing weekly report, etc \\
19.07.2005 & DESI & 2.0 & Designing with the group \\
19.07.2005 & DESI & 1.0 & Designing at home \\
20.07.2005 & DESI & 2.5 & Meeting with the project group (designing) \\

\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
20.07.2005 & DESI & 1.0 & Designing the data structures and drawing models \\
21.07.2005 & DESI & 3.5 & Designing and writing the document \\
21.07.2005 & DESI & 0.5 & Reading the document \\
22.07.2005 & MEET & 2.0 & Meeting with the project group \\
22.07.2005 & DESI & 1.5 & Writing the document, drawing models \\
24.07.2005 & DESI & 2.0 & Writing the document \\
25.7.2005 & MEET & 0.5 & Planning the meeting \\
25.7.2005 & MEET & 1.0 & Meeting with the project group \\
25.7.2005 & DESI & 2.0 & Writing the design document \\
25.7.2005 & OTHE & 0.5 & Weekly report, etc \\
26.7.2005 & TEST & 0.5 & Discussing testing. \\
26.7.2005 & DESI & 1.0 & Discussing design and reading, writing the design document.  \\
26.7.2005 & IMPL & 1.5 & Coding datastructures \\
25.7.2005 & TEST & 1.0 & Reading the desing document \\
27.7.2005 & MEET & 1.0 & Meeting with the project group \\
27.7.2005 & DESI & 1.0 & Correcting error in Design document \\
27.7.2005 & IMPL & 2.0 & Coding datastructures \\
28.7.2005 & IMPL & 2.0 & Coding datastructures \\
28.7.2005 & TEST & 1.0 & Testing DistributionFactory / UserDefinedDistribution \\
28.7.2005 & DESI & 0.5 & Correcting errors in design document \\
29.7.2005 & MEET & 1.0 & Meeting with the project group \\
29.7.2005 & IMPL & 2.0 & Coding datastructures, correcting errors \\
30.7.2005 & IMPL & 1.0 & Testing classes, correcting errors \\
30.7.2005 & OTHE & 1.0 & Writing manual and implementation document templates \\
31.7.2005 & IMPL & 1.0 & Viewing work of others \\
31.7.2005 & DESI & 1.0 & Reading the design document \\
31.7.2005 & MEET & 0.5 & Planning Monday's meeting \\
01.08.2005 & MEET & 0.5 & Planning the meeting \\
01.08.2005 & MEET & 2.0 & Meeting with the project group \\
01.08.2005 & OTHE & 0.5 & Weekly report, etc \\
01.08.2005 & IMPL & 1.0 & Studying the work of others \\
02.08.2005 & DESI & 2.0 & Reading the design document and planning the FTR  \\
02.08.2005 & IMPL & 1.0 & Coding datastructures \\
03.08.2005 & MEET & 1.0 & Design document FTR \\
03.08.2005 & IMPL & 2.0 & Coding Generator class and correcting errors \\
03.08.2005 & IMPL & 1.0 & Discussing implementation \\
04.08.2005 & IMPL & 3.0 & Coding Generator class \\
05.08.2005 & MEET & 1.5 & Meeting with the project group \\
05.08.2005 & IMPL & 1.5 & Discussing implementation, coding Generator \\
07.08.2005 & OTHE & 1.0 & Planning next meeting, reading code, etc \\
08.08.2005 & MEET & 1.5 & Meeting with the project group \\
08.08.2005 & IMPL & 2.0 & Coding FortranMain, splitting up classes \\
08.08.2005 & OTHE & 0.5 & Reviewing timetable, writing weekly report, etc \\
09.08.2005 & MEET & 1.0 & Meeting with the customer \\
09.08.2005 & IMPL & 1.0 & Coding FortranMain and reviewing Acceptation \\

\hline
\end{tabular}

\begin{tabular}[]{| l | l | l | p{9cm} |}
\hline
10.08.2005 & IMPL & 1.0 & Coding FortranMain, writing a model \\
10.08.2005 & IMPL & 1.0 & Trying to get the program to run \\
10.08.2005 & OTHE & 2.0 & Taina's testing lecture \\
11.08.2005 & MEET & 2.0 & Meeting with the project group \\
11.08.2005 & OTHE & 2.0 & Drawing a diagram from the system, reviewing the timetable \\
14.08.2005 & OTHE & 1.0 & Making a timetable, reviewing things to do \\
14.08.2005 & OTHE & 1.0 & Discussing timetable and implementation \\
15.08.2005 & MEET & 3.0 & Official meeting \\
16.08.2005 & TEST & 2.5 & Meeting, writing tests for distribution classes \\
16.08.2005 & TEST & 1.0 & Testing at home \\
17.08.2005 & TEST & 2.0 & Testing and documenting \\
17.08.2005 & TEST & 0.5 & Documenting at home \\
17.08.2005 & OTPR & 0.5 & Planning the user manual \\
18.08.2005 & OTPR & 4.0 & Writing the user manual \\
18.08.2005 & TEST & 2.0 & Official meeting, hunting bugs \\
19.08.2005 & OTPR & 2.0 & Writing the user manual \\
21.08.2005 & OTPR & 2.0 & Writing the user manual \\
22.08.2005 & OTPR & 2.0 & Reading and writing the user maual \\
22.08.2005 & MEET & 0.5 & Planning the weekly meetings \\
23.08.2005 & MEET & 3.0 & Meeting with the project group \\
24.08.2005 & MEET & 3.0 & Meeting with the project group \\
25.08.2005 & IMPL & 3.0 & Writing the implementation document \\
26.08.2005 & MEET & 1.0 & Meeting with the project group \\
26.08.2005 & IMPL & 2.5 & Writing implementation and testing documents \\
28.08.2005 & IMPL & 2.0 & Writing implementation document \\
28.08.2005 & OTHE & 1.0 & Reading the documents, planning the last week \\
29.8.2005 & MEET & 1.0 & Meeting with the project group \\
29.8.2005 & IMPL & 1.5 & Writing the implementation document \\
29.8.2005 & TEST & 0.5 & Writing the testing document \\
30.8.2005 & IMPL & 1.0 & Finalizing the implementation document \\
30.8.2005 & OTPR & 1.0 & Writing the end document \\
30.8.2005 & IMPL & 1.0 & Reading implementation, testing and end document \\
31.8.2005 & OTPR & 2.0 & Finalizing documents \\
1.9.2005 & OTHE & 1.5 & Metrics system \\
1.9.2005 & OTPR & 0.5 & Adding working hours to the conclusion document \\
1.9.2005 & OTHE & 1.0 & Finalizing the product \\
\hline
\end{tabular}