[PATCH] eepro100 reads pdev-> before pci_enable

As in the previous patches, this driver also reads pdev->irq
and pdev->resource before doing a pci_enable.
This looks correct to me, and compiles, I lack the hardware
to test this though. Comments ?

regards,

Dave.

-- 
| Dave Jones.        http://www.suse.de/~davej
| SuSE Labs

diff -urN --exclude-from=/home/davej/.exclude linux/drivers/net/eepro100.c linux-dj/drivers/net/eepro100.c
--- linux/drivers/net/eepro100.c	Wed Feb  7 12:42:39 2001
+++ linux-dj/drivers/net/eepro100.c	Wed Feb  7 18:51:45 2001
@@ -557,6 +557,17 @@
 	if (speedo_debug > 0  &&  did_version++ == 0)
 		printk(version);

+	/* save power state b4 pci_enable_device overwrites it */
+	pm = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	if (pm) {
+		u16 pwr_command;
+		pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command);
+		acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
+	}
+
+	if (pci_enable_device(pdev))
+		goto err_out_none;
+
 	if (!request_region(pci_resource_start(pdev, 1),
 			pci_resource_len(pdev, 1), "eepro100")) {
 		printk (KERN_ERR "eepro100: cannot reserve I/O ports\n");
@@ -586,17 +597,6 @@
 		printk("Found Intel i82557 PCI Speedo, MMIO at %#lx, IRQ %d.\n",
 			   pci_resource_start(pdev, 0), irq);
 #endif
-
-	/* save power state b4 pci_enable_device overwrites it */
-	pm = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	if (pm) {
-		u16 pwr_command;
-		pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command);
-		acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
-	}
-
-	if (pci_enable_device(pdev))
-		goto err_out_free_mmio_region;

 	pci_set_master(pdev);