Re: PCI bridge handling 2.4.0-test10 -> 2.4.2-pre3

[Adam Lackorzynski]

On Mon Feb 12, 2001 at 14:04:20 +0100, Jan-Benedict Glaw wrote:
> I've got a "Bull Express5800/Series" (dual P3) with a DAC1164 RAID
> controller. The mainboard is ServerWorks based and however, 2.4.2-pre3
> fails to find the RAID controller. I think there's a problem at
> scanning PCI busses behind PCI bridges. Here's the PCI bus layout as
> 2.4.0-test10 recognizes it:

There's was a change in the PCI bus scan code in pre3.

Could you please apply the following patch to arch/i386/kernel/pci-pc.c (against
2.4.1-pre3) and tell us your results? The fixup functions do not seem to
work right now so we'll trust the BIOS...

--- pci-pc.c.orig       Tue Feb 13 00:02:50 2001
+++ pci-pc.c    Tue Feb 13 00:19:29 2001
@@ -953,9 +953,6 @@
 struct pci_fixup pcibios_fixups[] = {
        { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82451NX,    pci_fixup_i450nx },
        { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82454GX,    pci_fixup_i450gx },
-       { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_SERVERWORKS,      PCI_DEVICE_ID_SERVERWORKS_HE,           pci_fixup_serverworks },
-       { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_SERVERWORKS,      PCI_DEVICE_ID_SERVERWORKS_LE,           pci_fixup_serverworks },
-       { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_SERVERWORKS,      PCI_DEVICE_ID_SERVERWORKS_CMIC_HE,      pci_fixup_serverworks },
        { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_COMPAQ,   PCI_DEVICE_ID_COMPAQ_6010,      pci_fixup_compaq },
        { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_UMC,      PCI_DEVICE_ID_UMC_UM8886BF,     pci_fixup_umc_ide },
        { PCI_FIXUP_HEADER,     PCI_VENDOR_ID_SI,       PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash },

Adam
-- 
Adam                 [e-mail]
  Lackorzynski         http://a.home.dhs.org