>
> After the updates to the opl3sa2 driver (2.4.2-pre3?) my card isn't being
> detected anymore. Are there further updates to come, or do I need to
> change the settings? The driver is being loaded as a module with the
> following in /etc/modules.conf:
[snip]
> The midi works fine, but 'modprobe sound' reports:
>
> opl3sa2: No cards found
> opl3sa2: 0 PnP card(s) found.
If you've configured ISA PnP support into the kernel, then the driver
ignores those settings unless you specify isapnp=0. What I'd suggest
is that you try disabling the configuration done by the isapnp tools,
which can be done on RedHat and derived systems by renaming your
/etc/isapnp.conf to something else. There seem to be some issues
with resetting the PnP configuration with isapnp after the in-kernel
ISA PnP driver has done its stuff, as a couple of other people have
mentioned similiar problems.
Scott
--
=============================================================================
Scott Murray email: scott@spiteful.org
http://www.spiteful.org (coming soon) ICQ: 10602428
-----------------------------------------------------------------------------
"Good, bad ... I'm the guy with the gun." - Ash, "Army of Darkness"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://vger.kernel.org/lkml/