Trying to set up VMWare configuration on my system.
System Environment:
DELL Inspiron 8000
Linux 2.2.16-22 Redhat 7.0
Display 1600x1200
VMWare 2.0.3-799
Problem: Unable to get VMWare running on my display
Description:
I configured VMWare according with my Samba configuration.
My system eth0 is configured with IP 192.168.1.21 and the
VMWare internal configuration with IP 192.168.10.21
I retrieved from www.vmware.com the recommended vmware.o module
and wrote the required information of /etc/X11/XF86Config-4
This is my /etc/X11 directory:
X XF86Config.sv gdm rstart xdm
XF86Config-4 Xmodmap lbxproxy sample.Xdefs xinit
XF86Config-4.old applnk prefdm system.mwmrc xserver
XF86Config.old fs proxymngr twm xsm
This is my XF86Config-4 file contents:
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# This loads all the modules...
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "fr_CH"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "on"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Generic LCD Panel 1600x1200"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5-90
VertRefresh 60
EndSection
Section "Device"
Identifier "ATI|Rage Mobility M4 AGP"
Driver "r128"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "VMware SVGA"
Driver "vmware"
BusID "PCI:0:15:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI|Rage Mobility M4 AGP"
Monitor "Generic LCD Panel 1600x1200"
DefaultDepth 24
Subsection "Display"
Depth 32
Modes "1600x1200"
EndSubSection
Subsection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
Subsection "extmod"
Option "XFree86-DGA" "on"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "VMware SVGA"
Monitor "Generic LCD Panel 1600x1200"
DefaultDepth 24
Subsection "Display"
Depth 32
Modes "1600x1200"
EndSubSection
Subsection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Section "DRI"
EndSection
This is my /var/log/XFree86.0.log:
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.2
(II) UnloadModule: "vmware"
(II) Unloading /usr/X11R6/lib/modules/drivers/vmware_drv.o
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xfcffc000 - 0xfcffffff (0x4000) MS[B]
[1] 0 0xe8000000 - 0xebffffff (0x4000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]E
[8] -1 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[9] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[10] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E
[11] -1 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[12] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] 0 0x0000cc00 - 0x0000ccff (0x100) IS[B]
[17] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[18] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[19] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[20] -1 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
[21] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) r128(0): Write-combining range (0xe8000000,0x2000000)
(II) r128(0): Memory manager initialized to (0,0) (1600,5242)
(II) r128(0): Reserved area from (0,1200) to (1600,1202)
(II) r128(0): Largest offscreen area available: 1600 x 4040
(==) r128(0): Backing store disabled
(II) r128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
29 256x256 slots
14 512x512 slots
(II) r128(0): Acceleration enabled
(II) r128(0): Using hardware cursor (scanline 4808)
(II) r128(0): Largest offscreen area available: 1600 x 4039
(II) r128(0): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Buttons: 3
(**) Option "Emulate3Buttons" "on"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
SetKbdSettings - type: 0 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
GetModeLine - scrn: 0 clock: 160000
GetModeLine - hdsp: 1600 hbeg: 1664 hend: 1688 httl: 2160
vdsp: 1200 vbeg: 1200 vend: 1203 vttl: 1250 flags: 5
VMWare start-up messages:
1) You are running a "2.2.16-22" kernel which causes data CDROMs to
appear as audio CDs under Windows9x guests and as unreadable under
Windows NT/2000 guests. We recommend you upgrade your kernel to 2.2.17 or
newer, or revert to 2.2.15 or older.
Fine.
2) My problem after VMWare does a test on my DISPLAY:
Your X server does not support XFree86 DGA accelerated graphics on your
display hardware. Full-screen SVGA mode will not have acceleration.
You may be able to download an updated XFree86 server at
"http://www.vmware.com/xfree86".
Any idea about ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/