(no subject)

Jaquemet Loic (jal@fleming.u-psud.fr)
Wed, 18 Apr 2001 02:26:32 +0200


Vibol Hou a écrit :

> Hi,
>
> I'm using 2.4.4-pre3 and get this message occasionally when the system is
> loaded:
>
> Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.
> Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.
>
> The nic is a 3Com 3c905B. Is this a bad thing?
>
> /proc/interrupts:
> CPU0 CPU1
> 0: 13167527 12036422 IO-APIC-edge timer
> 1: 0 2 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 4: 22773 19820 IO-APIC-edge
> 8: 1 0 IO-APIC-edge rtc
> 15: 1 4 IO-APIC-edge ide1
> 17: 50001929 49606064 IO-APIC-level eth0
> 18: 2459038 2364252 IO-APIC-level aic7xxx
> NMI: 0 0
> LOC: 25202946 25202942
> ERR: 0
>
> --
> Vibol Hou
> KhmerConnection
> http://khmer.cc
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

I've got a similar problem with a RTL-8139 (rev 10) ( 8139too.c )
Apr 17 22:53:12 skippy kernel: eth1: Too much work at interrupt,
IntrStatus=0x0040.

The maintenair of this module writes that's a RxFIIFO Overflow that have
probably no other issue than buying a new processor :)
But .. I didn't have this messages on pre - 2.4.3 kernels .. ( neither on
2.4.3ac7 )

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/