Corruption with ATA100 Maxtor 80 GB

Lars Weitze (cd@kalkatraz.de)
Fri, 13 Jul 2001 14:35:27 +0200


Hi,

I have following problem: When coping large files from one 80 GB Harddisk
to it's counterpart (sync made with cpbk every night) the kernel just
crashes. This happend when connected to the on-bord (IDE82371AB PIIX4 IDE
(rev 01) ) the first time. Then I switched to an Promise Ultra100 TX2
Controller (20268 Chip) and installed hedricks ide-patch. I still had bugs
left. Now after using hdparm -X32 /dev/hdx the system seems stable.
Also i had:
Jul 10 21:30:23 bigmama kernel: EXT2-fs error (device ide0(3,2)):
ext2_free_blocks: Freeing blocks not in datazone - block = 134217728,
count = 1
Jul 10 21:30:23 bigmama last message repeated 8 times

Any idea if it's a hardware bug or bad drivers?
Lars
-----
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
2).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
2).
Master Capable. Latency=64. Min Gnt=128.
Bus 0, device 4, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 4, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xd800 [0xd80f].
Bus 0, device 4, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 15.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 4, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 6, function 0:
SCSI storage controller: Adaptec AHA-2940U2/W / 7890 (rev 0).
IRQ 15.
Master Capable. Latency=32. Min Gnt=39.Max Lat=25.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 64 bit memory at 0xe2000000 [0xe2000fff].
Bus 0, device 10, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
1).
IRQ 12.
Master Capable. Latency=32. Min Gnt=4.Max Lat=18.
I/O at 0xb800 [0xb807].
I/O at 0xb400 [0xb403].
I/O at 0xb000 [0xb007].
I/O at 0xa800 [0xa803].
I/O at 0xa400 [0xa40f].
Non-prefetchable 32 bit memory at 0xe1800000 [0xe1803fff].
Bus 0, device 11, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
48).
IRQ 10.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xa000 [0xa07f].
Non-prefetchable 32 bit memory at 0xe1000000 [0xe100007f].
Bus 0, device 12, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 1).
IRQ 11.
Non-prefetchable 32 bit memory at 0xe0800000 [0xe0803fff].
Prefetchable 32 bit memory at 0xe3000000 [0xe37fffff].
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/