Re: tulip driver still broken

joseph.bueno@trader.com
Wed, 01 Aug 2001 18:45:43 +0200


Ben Greear wrote:
>
> Chris Friesen wrote:
> >
> > Thomas Zehetbauer wrote:
> > >
> > > My genuine digital network interface card ceased to work with the tulip
> > > driver contained in kernel revisions >= 2.4.4 and the development driver from
> > > sourceforge.net.
> >
> > How is the sourceforge driver different than the one at www.scyld.com?
> >
>
> Becker (Scyld) has only recently gotten his drivers to even compile
> on 2.4 kernel, and they are still beta quality for 2.4, evidently.
>
> There seem to be attempts to keep the drivers in sync, functionally,
> but the architectures have diverged quite a lot...
>
> Ben
>
> --
> Ben Greear <greearb@candelatech.com> <Ben_Greear@excite.com>
> President of Candela Technologies Inc http://www.candelatech.com
> ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear

Hi,

I am currently using a Xircom Ethernet adapter (tulip_cb module) with a
2.4.5 kernel.

The only way I have found to make it work is to turn on promiscuous mode
(with 'tcpdump -i eth0 -n > /dev/null') after bootup. I can turn it off
after a few minutes without problem.

I don't know if tulip driver I am using has been patched since I haven't
compiled this 2.4.5 kernel myself. Here is driver bootup information:

tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x200, 00:10:A4:C0:2A:30, IRQ 9.
eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1.

Hope this helps
Regards

--
Joseph Bueno
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/