BTW: Alan, do you think it would be worth to be able to compile both versions
together (in the modular case) ?
Andrzej
************************************************************************
diff -uNr linux-2.4.7-ac10/Documentation/Configure.help linux/Documentation/Configure.help
--- linux-2.4.7-ac10/Documentation/Configure.help Wed Aug 8 20:13:56 2001
+++ linux/Documentation/Configure.help Fri Aug 10 09:29:55 2001
@@ -16158,6 +16158,12 @@
details. You should also select and configure AGP
(/dev/agpgart) support.
+Build drivers for new (XFree 4.1) DRM
+CONFIG_DRM_NEW
+ If you set this option, the new DRM version needed by XFree86 4.1
+ will be used. Otherwise, the old DRM version will be used,
+ appropriate for XFree86 4.0.
+
3dfx Banshee/Voodoo3+
CONFIG_DRM_TDFX
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
@@ -16190,6 +16196,42 @@
Matrox g200/g400
CONFIG_DRM_MGA
+ Choose this option if you have a Matrox g200 or g400 graphics card. If M
+ is selected, the module will be called mga.o. AGP support is required
+ for this driver to work.
+
+3dfx Banshee/Voodoo3+
+CONFIG_DRM40_TDFX
+ Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+ graphics card. If M is selected, the module will be called tdfx.o.
+
+3dlabs GMX 2000
+CONFIG_DRM40_GAMMA
+ Choose this option if you have a 3dlabs GMX 2000 graphics card.
+ If M is selected, the module will be called gamma.o.
+
+ATI Rage 128
+CONFIG_DRM40_R128
+ Choose this option if you have an ATI Rage 128 graphics card. If M
+ is selected, the module will be called r128.o. AGP support for
+ this card is strongly suggested (unless you have a PCI version).
+
+ATI Radeon
+CONFIG_DRM40_RADEON
+ Choose this option if you have an ATI Radeon graphics card. There
+ are both PCI and AGP versions. You don't need to choose this to
+ run the Radeon in plain VGA mode. There is a product page at
+ <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+ If M is selected, the module will be called radeon.o.
+
+Intel I810
+CONFIG_DRM40_I810
+ Choose this option if you have an Intel I810 graphics card. If M is
+ selected, the module will be called i810.o. AGP support is required
+ for this driver to work.
+
+Matrox g200/g400
+CONFIG_DRM40_MGA
Choose this option if you have a Matrox g200 or g400 graphics card. If M
is selected, the module will be called mga.o. AGP support is required
for this driver to work.
-- ======================================================================= Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl phone (48)(58) 347 14 61 Faculty of Applied Phys. & Math., Technical University of Gdansk - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/