Re: IDE Problems on SIS 735? (continued)

Matthew S. Hallacy (poptix@techmonkeys.org)
Mon, 10 Sep 2001 22:03:10 -0600


On Sun, Sep 09, 2001 at 09:49:00PM +0100, Adrian Burgess wrote:
> Okay, I've now changed the IDE cable attached to my hard drives twice, and I'm
> still getting IDE DMA problems - has anyone else with a SIS 735 based
> motherboard been having any problems, because I'm running short of ideas?
> Also - what are the chances of data corruption from these errors?
> Thanks,
> Adrian.
>

I'm using the SiS 735 motherboard with ATA/100 IDE, I have an Quantum Bigfoot 8.1G drive,
along with two 45G IBM DTLA drives (ATA/100) on controller, I've had no problems beyond
some clicking on one of the IBM drives that also happens on a Promise PCI controller
(no messages to syslog about it, and S.M.A.R.T. reports no errors (I use smartctl))
2.4.9 kernel..

Matthew S. Hallacy

>
> (error report)
> hda: timeout waiting for DMA
> ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hda: drive not ready for command
> hda: status timeout: status=0xd0 { Busy }
> hdb: DMA disabled
> hda: drive not ready for command
> ide0: reset: success
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/