Re: How to debug PCI issues?

Martin Josefsson (gandalf@wlug.westbo.se)
Fri, 28 Sep 2001 12:40:32 +0200 (CEST)


On Thu, 27 Sep 2001, Ben Greear wrote:

> I'm working with a TYAN Tomcat board (i815, Ghz CPU). It's in a 1U
> machine with a butterfly riser so that I get two riser connections to
> one PCI slot. When I put Intel EEPRO nics in each slot, I can pass
> 30Mbps of traffic on each NIC without dropping a single packet
> (In two days of running).
>
> If I run 20Mbps on one of the DLINK ports, I'm fine, but if I run 10Mbps
> on two of the DLINK ports, I start seeing dropped packets on every
> interface, and port errors like RX-FIFO.

If I run traffic out one port I can get 100Mbit but if I try it with two
ports at the same time I cet about 20Mbit per port at best. And I also get
a _lot_ of errors but mostly carrier-errors.

> So, I'm thinking that the DLINK NIC must be screwing up the PCI
> bus somehow when more than one of it's interfaces is passing any
> significant traffic. I have been able to run 10Mbps on all 8 ports
> of two DLINKs on an Intel EEA2 (i815) board, so I suspect the MB.
>
> Does anyone have any ideas how to go about trouble-shooting this
> farther?
>
> Thanks,
> Ben
>
> --
> Ben Greear <greearb@candelatech.com> <Ben_Greear@excite.com>
> President of Candela Technologies Inc http://www.candelatech.com
> ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

/Martin

Never argue with an idiot. They drag you down to their level, then beat you with experience.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/