Re: [PATCH] PnP BIOS -- bugfix; update devlist on setpnp

[Steven A. DuChene]

Thomas:
Just to let you know I still have the same problem with a resource conflict
between the PnPBIOS code and the i2c/lm_sensors stuff at 1040 with this
latest patch. Again, this is on a Intel Lancewood (L440GX) motherboard.
I also have a system with a Intel STL2 motherboard (successor to the
Lancewood) so I will test that under the same conditions later tonight.

modprobe i2c-piix4
/lib/modules/2.4.10-ac12/kernel/drivers/i2c/i2c-piix4.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.10-ac12/kernel/drivers/i2c/i2c-piix4.o: insmod /lib/modules/2.4.10-ac12/kernel/drivers/i2c/i2c-piix4.o failed
/lib/modules/2.4.10-ac12/kernel/drivers/i2c/i2c-piix4.o: insmod i2c-piix4 failed

dmesg

.
.
.
i2c-piix4.o version 2.6.1 (20010830)
i2c-piix4.o: Found PIIX4 device
i2c-piix4.o: SMB region 0x1040 already in use!
i2c-piix4.o: Device not detected, module not inserted.

cat /proc/ioports
.
.
.
0c00-0c3f : Intel Corporation 82371AB PIIX4 ACPI
  0c00-0c3f : PnPBIOS PNP0c02
0ca0-0ca3 : PnPBIOS PNP0c02
0cb8-0cbf : PnPBIOS PNP0c02
0cf8-0cff : PCI conf1
1000-103f : PnPBIOS PNP0c02
1040-105f : Intel Corporation 82371AB PIIX4 ACPI
  1040-104f : PnPBIOS PNP0c02
.
.
.

-- 
Steven A. DuChene	[e-mail]
			[e-mail]
			[e-mail]

	http://www.mindspring.com/~sduchene/