Re: Intel EEPro 100 with kernel drivers

Thomas Langås (tlan@stud.ntnu.no)
Thu, 1 Nov 2001 09:03:48 +0100

Juergen Hasch:
> If you use the e100 driver, you can look at
> /proc/net/PRO_LAN_ADAPTERS/eth0.info
> If the "Tx_TCO_Packets" entry isn't zero after NFS times out,
> this may be your problem.
> With the eepro100 driver you will only see overruns with ifconfig.

Here's the full /proc/net/PRO_LAN_Adapters/eth0.info output (after NFS
timeouts):

gekko:~# cat /proc/net/PRO_LAN_Adapters/eth0.info
Description Intel(R) 8255x-based Ethernet Adapter
Driver_Name e100
Driver_Version 1.6.22
PCI_Vendor 0x8086
PCI_Device_ID 0x1229
PCI_Subsystem_Vendor 0x1028
PCI_Subsystem_ID 0x009b
PCI_Revision_ID 0x0008
PCI_Bus 2
PCI_Slot 4
IRQ 16
System_Device_Name eth0
Current_HWaddr 00:B0:D0:F0:8B:65
Permanent_HWaddr 00:B0:D0:F0:8B:65
Part_Number 07195d-000

Link up
Speed 100
Duplex full
State up

Rx_Packets 27747043
Tx_Packets 25999146
Rx_Bytes 1730389022
Tx_Bytes 21884644
Rx_Errors 0
Tx_Errors 0
Rx_Dropped 0
Tx_Dropped 0
Multicast 0
Collisions 0
Rx_Length_Errors 0
Rx_Over_Errors 0
Rx_CRC_Errors 0
Rx_Frame_Errors 0
Rx_FIFO_Errors 0
Rx_Missed_Errors 0
Tx_Aborted_Errors 0
Tx_Carrier_Errors 0
Tx_FIFO_Errors 0
Tx_Heartbeat_Errors 0
Tx_Window_Errors 0

Rx_TCP_Checksum_Good 0
Rx_TCP_Checksum_Bad 0
Tx_TCP_Checksum_Good 0
Tx_TCP_Checksum_Bad 0

Tx_Abort_Late_Coll 0
Tx_Deferred_Ok 0
Tx_Single_Coll_Ok 0
Tx_Multi_Coll_Ok 0
Rx_Long_Length_Errors 0
Rx_Align_Errors 0

Tx_Flow_Control_Pause 0
Rx_Flow_Control_Pause 0
Rx_Flow_Control_Unsup 0

Tx_TCO_Packets 0
Rx_TCO_Packets 1
scbp = 0xf89da000 bddp = 0xf77568c0

-- 
Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/