Re: Oops when syncing Sony Clie 760 with USB cradle

Stephan Gutschke (stephan@gutschke.com)
Thu, 08 Nov 2001 20:12:04 +0100


hi greg,

I am using coldsync version 2.2.3, which seems to be the
newest snapshot. I read the doc and it says in the changelog
that they removed the "usb_m50x" flag. Seems that using protocol
"simple" should now do the trick.

I do:

coldsync -mb /tmp/ -t serial -p /dev/ttyUSB0

with an .coldsyncrc like this:

listen serial {
protocol: simple;
}

pda "My Palm" {
# snum: XXXX;
username: "Stephan Gutschke";
userid: 256;
default;
}

coldsync just says:
Warning: no device on /dev/ttyUSB0. Sleeping
Please press the HotSync button. <- comes after i press the hotsync
button on my clie

And than i get the things below, which

Nov 8 19:58:53 yvette kernel: hub.c: port 1 connection change
Nov 8 19:58:53 yvette kernel: hub.c: port 1, portstatus 101, change 1,
12 Mb/s
Nov 8 19:58:53 yvette kernel: hub.c: port 1, portstatus 103, change 0,
12 Mb/s
Nov 8 19:58:53 yvette kernel: hub.c: USB new device connect on bus1/1,
assigned device number 4
Nov 8 19:58:53 yvette kernel: usb.c: kmalloc IF cb82a620, numif 1
Nov 8 19:58:53 yvette kernel: usb.c: new device strings: Mfr=1,
Product=2, SerialNumber=0
Nov 8 19:58:53 yvette kernel: usb.c: USB device number 4 default
language ID 0x409
Nov 8 19:58:53 yvette kernel: Manufacturer: Sony Corp.
Nov 8 19:58:53 yvette kernel: Product: Palm Handheld
Nov 8 19:58:53 yvette kernel: usbserial.c: Sony Clie 4.0 converter detected
Nov 8 19:58:53 yvette kernel: visor.c: visor_startup
Nov 8 19:58:53 yvette kernel: visor.c: visor_startup - Set config to 1
Nov 8 19:58:53 yvette kernel: visor.c: Sony Clie 4.0: Number of ports: 2
Nov 8 19:58:53 yvette kernel: visor.c: Sony Clie 4.0: port 1, is for
Generic use and is bound to ttyUSB0
Nov 8 19:58:53 yvette kernel: visor.c: Sony Clie 4.0: port 2, is for
HotSync use and is bound to ttyUSB1
Nov 8 19:58:53 yvette kernel: usb-uhci.c: interrupt, status 2, frame# 1802
Nov 8 19:58:56 yvette kernel: usb_control/bulk_msg: timeout
Nov 8 19:58:56 yvette kernel: visor.c: visor_startup - error getting
first unknown palm command
Nov 8 19:58:59 yvette kernel: usb_control/bulk_msg: timeout
Nov 8 19:58:59 yvette kernel: visor.c: visor_startup - error getting
second unknown palm command
Nov 8 19:58:59 yvette kernel: usbserial.c: Sony Clie 4.0 converter now
attached to ttyUSB0 (or usb/tts/0 for devfs)
Nov 8 19:58:59 yvette kernel: usbserial.c: Sony Clie 4.0 converter now
attached to ttyUSB1 (or usb/tts/1 for devfs)
Nov 8 19:58:59 yvette kernel: usb.c: serial driver claimed interface
cb82a620
Nov 8 19:58:59 yvette kernel: usb.c: kusbd: /sbin/hotplug add 4
Nov 8 19:58:59 yvette kernel: usb.c: kusbd policy returned 0xfffffffe
Nov 8 19:59:01 yvette kernel: visor.c: visor_open - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_openport->read_urb db335840
Nov 8 19:59:01 yvette kernel: visor.c: visor_openport->serial->dev de430c00
Nov 8 19:59:01 yvette kernel: visor.c:
visor_openport->read_urb->transfer_buffer ce39af20
Nov 8 19:59:01 yvette kernel: visor.c:
visor_openport->read_urb->transfer_buffer_length 64
Nov 8 19:59:01 yvette kernel: visor.c: visor_open just after reading
and submitting urb 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5401
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5402
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - data bits = 8
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - parity = none
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - stop bits = 1
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - RTS/CTS is
disabled
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - XON/XOFF is
disabled
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - baud rate =
230400
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5401
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5401
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5402
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - data bits = 8
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - parity = none
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - stop bits = 1
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - RTS/CTS is
disabled
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - XON/XOFF is
disabled
Nov 8 19:59:01 yvette kernel: visor.c: visor_set_termios - baud rate = 9600
Nov 8 19:59:01 yvette kernel: visor.c: visor_ioctl - port 0, cmd 0x5401
Nov 8 19:59:01 yvette kernel: visor.c: visor_chars_in_buffer - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_chars_in_buffer - returns 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_read_bulk_callback - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_read_bulk_callback -
length = 6, data = 01 ff 00 00 00 16
Nov 8 19:59:01 yvette kernel: visor.c: visor_chars_in_buffer - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_chars_in_buffer - returns 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_read_bulk_callback - port 0
Nov 8 19:59:01 yvette kernel: visor.c: visor_read_bulk_callback -
length = 22, data = 90 01 00 00 00 00 00 00 00 20 00 00 00 08 00 00 01
00 00 00 00 00
Nov 8 20:00:01 yvette kernel: usb-uhci.c: interrupt, status 3, frame# 1889
Nov 8 20:00:01 yvette kernel: visor.c: visor_read_bulk_callback - port 0
Nov 8 20:00:01 yvette kernel: visor.c: visor_read_bulk_callback -
nonzero read bulk status received: -84
Nov 8 20:00:01 yvette kernel: hub.c: port 1 connection change
Nov 8 20:00:01 yvette kernel: hub.c: port 1, portstatus 100, change 3,
12 Mb/s
Nov 8 20:00:01 yvette kernel: usb.c: USB disconnect on device 4
Nov 8 20:00:01 yvette kernel: visor.c: visor_shutdown
Nov 8 20:00:01 yvette kernel: visor.c: visor_close - port 0
Nov 8 20:00:01 yvette kernel: usbserial.c: Sony Clie 4.0 converter now
disconnected from ttyUSB0
Nov 8 20:00:01 yvette kernel: usbserial.c: Sony Clie 4.0 converter now
disconnected from ttyUSB1
Nov 8 20:00:01 yvette kernel: usb.c: kusbd: /sbin/hotplug remove 4
Nov 8 20:00:01 yvette kernel: usb.c: kusbd policy returned 0xfffffffe
Nov 8 20:00:01 yvette kernel: hub.c: port 1 enable change, status 100

Greg KH wrote:

> On Thu, Nov 08, 2001 at 12:03:44AM +0100, Stephan Gutschke wrote:
>
>>didn't work :-(
>>
>>This is the output of /var/log/syslog if I connect to ttyUSB0
>>I am not sure yet though that the problem is in your module.
>>I know the jpilot worked, before, but I will still try later
>>to connect to the clie with coldsync as well.
>>Lets see if that gives anything different.
>>Let me know what else I can do to help.
>>
>
> Yes, you will have to use coldsync to talk to this device right now, as
> pilot-link doesn't have support for the 4.x Palm OS USB protocol yet
> (jpilot uses pilot-link.)
>
> Let me know if coldsync fails (remember you have to tell coldsync that
> you are a m50x, and that you want the "simple" protocol, check the docs
> for the proper config file setting.)
>
> thanks,
>
> greg k-h
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

-- 
Stephan Gutschke

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/