Hi!
Attached you can find an update to the VIA driver, against 2.5.1. It
adds support for an old revision of the vt82c576 chip, and for the new
vt8233c (vt8233 + 3Com NIC) and vt8233a (vt8233 + UDMA133) chips.
It was tested only on other VIA chips, as I don't have any of the newly
added ones, though it should just work on those.
Bundled are a couple changes to my entries in the MAINTAINERS file,
added an ID for the 8233a in pci_ids.h and with that a couple fixes to the
VIA entries in the file (order, tabs/spaces).
Please merge into 2.5.1. I think it can go into 2.4 later, as soon as it
gets enough testing.
-- Vojtech Pavlik SuSE Labs--ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="via-3.33.diff"
diff -urN linux/MAINTAINERS linux-via/MAINTAINERS --- linux/MAINTAINERS Mon Dec 10 19:39:20 2001 +++ linux-via/MAINTAINERS Mon Dec 24 00:13:51 2001 @@ -843,7 +843,7 @@ M: vojtech@suse.cz L: linux-joystick@atrey.karlin.mff.cuni.cz W: http://www.suse.cz/development/joystick/ -S: Supported +S: Maintained KERNEL AUTOMOUNTER (AUTOFS) P: H. Peter Anvin @@ -1538,7 +1538,7 @@ M: vojtech@suse.cz L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net -S: Supported +S: Maintained USB BLUETOOTH DRIVER P: Greg Kroah-Hartman @@ -1561,7 +1561,7 @@ L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net W: http://www.suse.cz/development/input/ -S: Supported +S: Maintained USB HUB P: Johannes Erdfelt @@ -1612,7 +1612,7 @@ M: vojtech@suse.cz L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net -S: Supported +S: Maintained USB SE401 DRIVER P: Jeroen Vreeken diff -urN linux/drivers/ide/ide-timing.h linux-via/drivers/ide/ide-timing.h --- linux/drivers/ide/ide-timing.h Sat Feb 3 20:27:43 2001 +++ linux-via/drivers/ide/ide-timing.h Mon Dec 24 00:04:13 2001 @@ -2,11 +2,9 @@ #define _IDE_TIMING_H /* - * $Id: ide-timing.h,v 1.5 2001/01/15 21:48:56 vojtech Exp $ + * $Id: ide-timing.h,v 1.6 2001/12/23 22:47:56 vojtech Exp $ * - * Copyright (c) 1999-2000 Vojtech Pavlik - * - * Sponsored by SuSE + * Copyright (c) 1999-2001 Vojtech Pavlik */ /* @@ -25,16 +23,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: - * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include <linux/hdreg.h> -#ifndef XFER_PIO_5 #define XFER_PIO_5 0x0d #define XFER_UDMA_SLOW 0x4f -#endif struct ide_timing { short mode; @@ -49,13 +45,15 @@ }; /* - * PIO 0-5, MWDMA 0-2 and UDMA 0-5 timings (in nanoseconds). + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension. + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. */ static struct ide_timing ide_timing[] = { + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, @@ -105,6 +103,7 @@ #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) #define XFER_MODE 0xf0 +#define XFER_UDMA_133 0x48 #define XFER_UDMA_100 0x44 #define XFER_UDMA_66 0x42 #define XFER_UDMA 0x40 @@ -123,6 +122,9 @@ if ((map & XFER_UDMA) && (id->field_valid & 4)) { /* Want UDMA and UDMA bitmap valid */ + if ((map & XFER_UDMA_133) == XFER_UDMA_133) + if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best; + if ((map & XFER_UDMA_100) == XFER_UDMA_100) if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best; @@ -174,14 +176,14 @@ static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) { - q->setup = EZ(t->setup, T); - q->act8b = EZ(t->act8b, T); - q->rec8b = EZ(t->rec8b, T); - q->cyc8b = EZ(t->cyc8b, T); - q->active = EZ(t->active, T); - q->recover = EZ(t->recover, T); - q->cycle = EZ(t->cycle, T); - q->udma = EZ(t->udma, UT); + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); } static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) diff -urN linux/drivers/ide/via82cxxx.c linux-via/drivers/ide/via82cxxx.c --- linux/drivers/ide/via82cxxx.c Tue Nov 27 18:23:27 2001 +++ linux-via/drivers/ide/via82cxxx.c Mon Dec 24 00:09:23 2001 @@ -1,5 +1,5 @@ /* - * $Id: via82cxxx.c,v 3.29 2001/09/10 10:06:00 vojtech Exp $ + * $Id: via82cxxx.c,v 3.33 2001/12/23 22:46:12 vojtech Exp $ * * Copyright (c) 2000-2001 Vojtech Pavlik * @@ -7,23 +7,21 @@ * Michel Aubry * Jeff Garzik * Andre Hedrick - * - * Sponsored by SuSE */ /* * VIA IDE driver for Linux. Supports * * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, - * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233 + * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a * * southbridges, which can be found in * * VIA Apollo Master, VP, VP2, VP2/97, VP3, VPX, VPX/97, MVP3, MVP4, P6, Pro, * ProII, ProPlus, Pro133, Pro133+, Pro133A, Pro133A Dual, Pro133T, Pro133Z, * PLE133, PLE133T, Pro266, Pro266T, ProP4X266, PM601, PM133, PN133, PL133T, - * PX266, PM266, KX133, KT133, KT133A, KLE133, KT266, KX266, KM133, KM133A, - * KL133, KN133, KM266 + * PX266, PM266, KX133, KT133, KT133A, KT133E, KLE133, KT266, KX266, KM133, + * KM133A, KL133, KN133, KM266 * PC-Chips VXPro, VXPro+, VXTwo, TXPro-III, TXPro-AGP, AGPPro, ViaGra, BXToo, * BXTel, BXpert * AMD 640, 640 AGP, 750 IronGate, 760, 760MP @@ -32,9 +30,9 @@ * * chipsets. Supports * - * PIO 0-5, MWDMA 0-2, SWDMA 0-2 and UDMA 0-5 + * PIO 0-5, MWDMA 0-2, SWDMA 0-2 and UDMA 0-6 * - * (this includes UDMA33, 66 and 100) modes. UDMA66 and higher modes are + * (this includes UDMA33, 66, 100 and 133) modes. UDMA66 and higher modes are * autoenabled only in case the BIOS has detected a 80 wire cable. To ignore * the BIOS data and assume the cable is present, use 'ide0=ata66' or * 'ide1=ata66' on the kernel command line. @@ -56,8 +54,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: - * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include <linux/config.h> @@ -87,10 +85,12 @@ #define VIA_UDMA_33 0x001 #define VIA_UDMA_66 0x002 #define VIA_UDMA_100 0x003 +#define VIA_UDMA_133 0x004 #define VIA_BAD_PREQ 0x010 /* Crashes if PREQ# till DDACK# set */ #define VIA_BAD_CLK66 0x020 /* 66 MHz clock doesn't work correctly */ #define VIA_SET_FIFO 0x040 /* Needs to have FIFO split set */ #define VIA_NO_UNMASK 0x080 /* Doesn't work with IRQ unmasking on */ +#define VIA_BAD_ID 0x100 /* Has wrong vendor ID (0x1107) */ /* * VIA SouthBridge chips. @@ -104,10 +104,11 @@ unsigned short flags; } via_isa_bridges[] = { #ifdef FUTURE_BRIDGES - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 }, #endif + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, @@ -121,6 +122,7 @@ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, { NULL } }; @@ -128,7 +130,7 @@ static unsigned char via_enabled; static unsigned int via_80w; static unsigned int via_clock; -static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100" }; +static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; /* * VIA /proc entry. @@ -151,7 +153,7 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count) { - short speed[4], cycle[4], setup[4], active[4], recover[4], den[4], + int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], uen[4], udma[4], umul[4], active8b[4], recover8b[4]; struct pci_dev *dev = bmide_dev; unsigned int v, u, i; @@ -161,7 +163,7 @@ via_print("----------VIA BusMastering IDE Configuration----------------"); - via_print("Driver Version: 3.29"); + via_print("Driver Version: 3.33"); via_print("South Bridge: VIA %s", via_config->name); pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); @@ -170,7 +172,7 @@ via_print("Highest DMA rate: %s", via_dma[via_config->flags & VIA_UDMA]); via_print("BM-DMA base: %#x", via_base); - via_print("PCI clock: %dMHz", via_clock); + via_print("PCI clock: %d.%dMHz", via_clock / 1000, via_clock / 100 % 10); pci_read_config_byte(dev, VIA_MISC_1, &t); via_print("Master Read Cycle IRDY: %dws", (t & 64) >> 6); @@ -218,40 +220,45 @@ uen[i] = ((u >> ((3 - i) << 3)) & 0x20); den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); - speed[i] = 20 * via_clock / (active[i] + recover[i]); - cycle[i] = 1000 / via_clock * (active[i] + recover[i]); + speed[i] = 2 * via_clock / (active[i] + recover[i]); + cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock; if (!uen[i] || !den[i]) continue; switch (via_config->flags & VIA_UDMA) { - - case VIA_UDMA_100: - speed[i] = 60 * via_clock / udma[i]; - cycle[i] = 333 / via_clock * udma[i]; + + case VIA_UDMA_33: + speed[i] = 2 * via_clock / udma[i]; + cycle[i] = 1000000 * udma[i] / via_clock; break; case VIA_UDMA_66: - speed[i] = 40 * via_clock / (udma[i] * umul[i]); - cycle[i] = 500 / via_clock * (udma[i] * umul[i]); + speed[i] = 4 * via_clock / (udma[i] * umul[i]); + cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock; break; - case VIA_UDMA_33: - speed[i] = 20 * via_clock / udma[i]; - cycle[i] = 1000 / via_clock * udma[i]; + case VIA_UDMA_100: + speed[i] = 6 * via_clock / udma[i]; + cycle[i] = 333333 * udma[i] / via_clock; + break; + + case VIA_UDMA_133: + speed[i] = 8 * via_clock / udma[i]; + cycle[i] = 250000 * udma[i] / via_clock; break; } } via_print_drive("Transfer Mode: ", "%10s", den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); - via_print_drive("Address Setup: ", "%8dns", (1000 / via_clock) * setup[i]); - via_print_drive("Cmd Active: ", "%8dns", (1000 / via_clock) * active8b[i]); - via_print_drive("Cmd Recovery: ", "%8dns", (1000 / via_clock) * recover8b[i]); - via_print_drive("Data Active: ", "%8dns", (1000 / via_clock) * active[i]); - via_print_drive("Data Recovery: ", "%8dns", (1000 / via_clock) * recover[i]); + via_print_drive("Address Setup: ", "%8dns", 1000000 * setup[i] / via_clock); + via_print_drive("Cmd Active: ", "%8dns", 1000000 * active8b[i] / via_clock); + via_print_drive("Cmd Recovery: ", "%8dns", 1000000 * recover8b[i] / via_clock); + via_print_drive("Data Active: ", "%8dns", 1000000 * active[i] / via_clock); + via_print_drive("Data Recovery: ", "%8dns", 1000000 * recover[i] / via_clock); via_print_drive("Cycle Time: ", "%8dns", cycle[i]); - via_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 10, speed[i] % 10); + via_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 1000, speed[i] / 100 % 10); return p - buffer; /* hoping it is less than 4K... */ } @@ -280,6 +287,7 @@ case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; default: return; } @@ -296,20 +304,21 @@ { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct ide_timing t, p; - int T, UT; + unsigned int T, UT; if (speed != XFER_PIO_SLOW && speed != drive->current_speed) if (ide_config_drive_speed(drive, speed)) printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n", drive->dn >> 1, drive->dn & 1); - T = 1000 / via_clock; + T = 1000000000 / via_clock; switch (via_config->flags & VIA_UDMA) { case VIA_UDMA_33: UT = T; break; case VIA_UDMA_66: UT = T/2; break; case VIA_UDMA_100: UT = T/3; break; - default: UT = T; break; + case VIA_UDMA_133: UT = T/4; break; + default: UT = T; } ide_timing_compute(drive, speed, &t, T, UT); @@ -365,7 +374,8 @@ XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0)); + (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | + (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); via_set_drive(drive, speed); @@ -395,14 +405,16 @@ */ for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((isa = pci_find_device(PCI_VENDOR_ID_VIA, via_config->id, NULL))) { + if ((isa = pci_find_device(PCI_VENDOR_ID_VIA + + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { + pci_read_config_byte(isa, PCI_REVISION_ID, &t); if (t >= via_config->rev_min && t <= via_config->rev_max) break; } if (!via_config->id) { - printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@suse.cz>\n"); + printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@ucw.cz>\n"); return -ENODEV; } @@ -412,22 +424,28 @@ switch (via_config->flags & VIA_UDMA) { - case VIA_UDMA_100: - - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || (((u >> i) & 0x20) && (((u >> i) & 7) < 3))) - via_80w |= (1 << (1 - (i >> 4))); /* BIOS 80-wire bit or UDMA w/ < 50ns/cycle */ - break; - case VIA_UDMA_66: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); /* Enable Clk66 */ pci_write_config_dword(dev, VIA_UDMA_TIMING, u | 0x80008); for (i = 24; i >= 0; i -= 8) if (((u >> (i & 16)) & 8) && ((u >> i) & 0x20) && (((u >> i) & 7) < 2)) via_80w |= (1 << (1 - (i >> 4))); /* 2x PCI clock and UDMA w/ < 3T/cycle */ break; + + case VIA_UDMA_100: + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || (((u >> i) & 0x20) && (((u >> i) & 7) < 4))) + via_80w |= (1 << (1 - (i >> 4))); /* BIOS 80-wire bit or UDMA w/ < 60ns/cycle */ + break; + + case VIA_UDMA_133: + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || (((u >> i) & 0x20) && (((u >> i) & 7) < 8))) + via_80w |= (1 << (1 - (i >> 4))); /* BIOS 80-wire bit or UDMA w/ < 60ns/cycle */ + break; + } if (via_config->flags & VIA_BAD_CLK66) { /* Disable Clk66 */ @@ -466,10 +484,17 @@ * Determine system bus clock. */ - via_clock = system_bus_clock(); - if (via_clock < 20 || via_clock > 50) { + via_clock = system_bus_clock() * 1000; + + switch (via_clock) { + case 33000: via_clock = 33333; break; + case 37000: via_clock = 37500; break; + case 41000: via_clock = 41666; break; + } + + if (via_clock < 20000 || via_clock > 50000) { printk(KERN_WARNING "VP_IDE: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", via_clock); - printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want to force UDMA66/UDMA100.\n"); + printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want to assume 80-wire cable.\n"); via_clock = 33; } diff -urN linux/include/linux/pci_ids.h linux-via/include/linux/pci_ids.h --- linux/include/linux/pci_ids.h Sat Dec 8 01:26:13 2001 +++ linux-via/include/linux/pci_ids.h Mon Dec 24 00:11:15 2001 @@ -946,11 +946,12 @@ #define PCI_DEVICE_ID_VIA_8233_7 0x3065 #define PCI_DEVICE_ID_VIA_82C686_6 0x3068 #define PCI_DEVICE_ID_VIA_8233_0 0x3074 -#define PCI_DEVICE_ID_VIA_8622 0x3102 -#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 -#define PCI_DEVICE_ID_VIA_8361 0x3112 #define PCI_DEVICE_ID_VIA_8633_0 0x3091 #define PCI_DEVICE_ID_VIA_8367_0 0x3099 +#define PCI_DEVICE_ID_VIA_8622 0x3102 +#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 +#define PCI_DEVICE_ID_VIA_8361 0x3112 +#define PCI_DEVICE_ID_VIA_8233A 0x3147 #define PCI_DEVICE_ID_VIA_86C100A 0x6100 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 @@ -960,7 +961,7 @@ #define PCI_DEVICE_ID_VIA_82C597_1 0x8597 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_8601_1 0x8601 -#define PCI_DEVICE_ID_VIA_8505_1 0X8605 +#define PCI_DEVICE_ID_VIA_8505_1 0x8605 #define PCI_DEVICE_ID_VIA_8633_1 0xB091 #define PCI_DEVICE_ID_VIA_8367_1 0xB099
--ReaqsoxgOBHFXBhH-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/