First: my english is realy bad - sorry
My PC hangs sporadicaly (every 2 weeks) after heavy Network traffic.
I tried to work around the problem by changing the NIC (dmfe >
realtek, using new driver 8139too), but it din't help.
Today i had the luck ( :-( ) that the syslog-console was activ, so
that I could get the messages (otherwise the PC hangs completly, and
its no more longer possible to change the console)
The PC akts as a small server.
Main running services:
Kernel-NFS
Samba 2.2.1
mysql
sshd: OpenSSH_2.9.9p2, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
apache w/ php
ip-filter
squid
Hardware:
lspci -v says:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin
V/V+ AGP System Controller
Flags: bus master, slow devsel, latency 32
Memory at da000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [b0] AGP version 1.0
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04)
(prog-if 00 [Normal decode])
Flags: bus master, slow devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: db000000-dbffffff
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA
Bridge [Aladdin IV] (rev c3)
Flags: bus master, medium devsel, latency 0
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1)
(prog-if fa)
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at f000 [size=16]
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at e000 [size=256]
Memory at dd000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dc000000 [disabled] [size=64K]
00:14.0 Network controller: AVM Audiovisuelles MKTG & Computer System
GmbH A1 ISDN [Fritz] (rev 02)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH
FRITZ!Card ISDN Controller
Flags: medium devsel, IRQ 11
Memory at dd002000 (32-bit, non-prefetchable) [size=32]
I/O ports at e400 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
AGP (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0084
Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
Memory at db000000 (32-bit, prefetchable) [size=16M]
I/O ports at d000 [size=256]
Memory at d9000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
and now the errormessage:
invalid opperand: 0000
CPU: 0
EIP: 0010:[<c010a123>]
------ inserted
(the only simmilar entry in System.map:c010a120 t IRQ0x00_interrupt)
------ continue
EFLAGS: 00010046
eax: d4ac5428 ebx:00000014 ecx:00000054 edx:14c42814
esi: 0402d7c0 edi:26dd33a3 ebp:04040101 esp:c2f23fe8
ds 002b es 002b ss 0018
Process sshd (pid 1407, stackpage=c2f23000)
Stack: ffffff00 08078480 00000023
00000206 bffff236 0000002b
Call Trace:
Code: ff ff eb d9 89 f6 8d bc 27 00 00 00 00 68 01 ff ff ff eb c9
teh error ocured while i was doing a backup via ssh & tar + gzip
( something like:
ssh 192.168.0.1 tar -cSp --numeric-owner -f - /xport/netdata | gzip> \
/var/backup/hdd4/filename.tgz)
but as I said simillar errors ocure not only while running ssh.
Same error i had with earlier Kernelversions (2.4.9, 2.4.8), thats wy
i use a out-of-the-box-kernel of a Distribution (SuSE).
If this error seems to result out of a hardware error, a reply would
be verry nice.
I send you the output of dmesg as a txtfile.
I'w downloaded today aktual Kernel and try it with 2.4.17.
Thank you all for doing such a good work on this nice OS.
I work since 3 years with Linux - and I enjoi it every day.
A happy new year from Berlin
Klaus
-- live free or die :: linux--------------020905020709080509070307 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt"
Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS) BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 32752 zone(0): 4096 pages. zone(1): 28656 pages. zone(2): 0 pages. No local APIC present or hardware disabled Kernel command line: auto BOOT_IMAGE=server ro root=302 BOOT_FILE=/boot/vmlinuz Initializing CPU#0 Detected 501.141 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 999.42 BogoMIPS Memory: 126416k/131008k available (1289k kernel code, 4204k reserved, 381k data, 124k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2 Enabling new style K6 write allocation for 127 Mb CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002 CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xfb2a0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller on PCI bus 00 dev 78 PCI: Assigned IRQ 5 for device 00:0f.0 ALI15X3: chipset revision 193 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM BIGFOOT TS12.7A, ATA DISK drive hdb: FX810S, ATAPI CD/DVD-ROM drive ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hdc: ST320423A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 25075008 sectors (12838 MB) w/418KiB Cache, CHS=1560/255/63, UDMA(33) hdc: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(33) hdb: ATAPI 8X CD-ROM drive, 256kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ide-floppy driver 0.97.sv SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 124k freed Adding Swap: 249944k swap-space (priority -1) Adding Swap: 128480k swap-space (priority -2) CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.114.6.14/1.94.6.7/1.140.6.8/1.85.6.6/1.21.6.1/1.5.6.3 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.41.6.4 HiSax: Layer2 Revision 2.25.6.3 HiSax: TeiMgr Revision 2.17.6.2 HiSax: Layer3 Revision 2.17.6.4 HiSax: LinkLayer Revision 2.51.6.5 HiSax: Approval certification valid HiSax: Approved with ELSA Microlink PCI cards HiSax: Approved with Eicon Technology Diva 2.01 PCI cards HiSax: Approved with Sedlbauer Speedfax + cards HiSax: Approved with HFC-S PCI A based cards HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM PCI driver Rev. 1.22.6.5 PCI: Found IRQ 11 for device 00:14.0 AVM PCI: stat 0x20a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:11 base:0xE400 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 11 count 0 AVM Fritz PnP/PCI: IRQ 11 count 5 HiSax: DSS1 Rev. 2.30.6.1 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: debugging flags card 1 set to 4 isdn: Verbose-Level is 3 ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocated reset data structure c5427000 8139too Fast Ethernet driver 0.9.18a PCI: Found IRQ 10 for device 00:10.0 eth0: RealTek RTL8139 Fast Ethernet at 0xc8849000, 00:50:fc:2e:bc:5c, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ip_tables: (c)2000 Netfilter core team ip_conntrack (1023 buckets, 8184 max) eth0: no IPv6 routers present OPEN: 192.168.1.99 -> 145.253.2.11 ICMP ippp0: dialing 1 0192071... isdn_net: ippp0 connected nfsd: last server has exited nfsd: unexporting all filesystems
--------------020905020709080509070307--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/