--==_Exmh_-17466361920
Content-Type: text/plain; charset=us-ascii
The attached patch folds in the bug fixes that were made in 2.4 and also
updates the locking scheme again.
This is the change log:
- Alter the Main Makefile to list 53c700_d.h (a scripts generated file) rather
than 53c700-mem.c (which is no longer produced) as removable on clean.
- change from readl/writel to __raw_readl/writel. This is primarily for the
parisc.
- Add in a missing size initialisation for request_bufflen on SCSI automatic
sense requests. This caused the pci_unmap_single to fail and led to an
accumulation of mappings in the bus MMU.
- Changes the scripts code to explicitly clear ATN and then ACK for pre
command messages. This was causing a basic INQUIRY failure on a CDRW.
- adds a missing mca_set_adapter_name to the D700 driver.
- Updates the lasi700 driver to sync with the current parisc tree.
- use the host->host_lock instead of &io_request_lock
James Bottomley
--==_Exmh_-17466361920
Content-Type: text/plain ; name="ncr700-2.5.2.diff"; charset=us-ascii
Content-Description: ncr700-2.5.2.diff
Content-Disposition: attachment; filename="ncr700-2.5.2.diff"
Index: linux/2.5/Makefile
diff -u linux/2.5/Makefile:1.1.1.7 linux/2.5/Makefile:1.1.1.7.4.1
--- linux/2.5/Makefile:1.1.1.7 Wed Jan 16 12:25:12 2002
+++ linux/2.5/Makefile Wed Jan 16 13:49:02 2002
@@ -204,7 +204,7 @@
drivers/scsi/aic7xxx/aicasm/aicasm_scan.c \
drivers/scsi/aic7xxx/aicasm/y.tab.h \
drivers/scsi/aic7xxx/aicasm/aicasm \
- drivers/scsi/53c700-mem.c \
+ drivers/scsi/53c700_d.h \
net/khttpd/make_times_h \
net/khttpd/times.h \
submenu*
Index: linux/2.5/drivers/scsi/53c700.c
diff -u linux/2.5/drivers/scsi/53c700.c:1.1.1.2 linux/2.5/drivers/scsi/53c700.c:1.1.1.2.18.1
--- linux/2.5/drivers/scsi/53c700.c:1.1.1.2 Sun Dec 9 13:21:22 2001
+++ linux/2.5/drivers/scsi/53c700.c Wed Jan 16 13:49:02 2002
@@ -51,6 +51,14 @@
/* CHANGELOG
*
+ * Version 2.7
+ *
+ * Fixed scripts problem which caused certain devices (notably CDRWs)
+ * to hang on initial INQUIRY. Updated NCR_700_readl/writel to use
+ * __raw_readl/writel for parisc compatibility (Thomas
+ * Bogendoerfer). Added missing SCp->request_bufflen initialisation
+ * for sense requests (Ryan Bradetich).
+ *
* Version 2.6
*
* Following test of the 64 bit parisc kernel by Richard Hirst,
@@ -96,7 +104,7 @@
* Initial modularisation from the D700. See NCR_D700.c for the rest of
* the changelog.
* */
-#define NCR_700_VERSION "2.6"
+#define NCR_700_VERSION "2.7"
#include <linux/config.h>
#include <linux/version.h>
@@ -310,7 +318,6 @@
hostdata->pScript = pScript;
NCR_700_dma_cache_wback((unsigned long)script, sizeof(SCRIPT));
hostdata->state = NCR_700_HOST_FREE;
- spin_lock_init(&hostdata->lock);
hostdata->cmd = NULL;
host->max_id = 7;
host->max_lun = NCR_700_MAX_LUNS;
@@ -1048,6 +1055,7 @@
slot->pCmd,
SCp->cmd_len,
PCI_DMA_TODEVICE);
+ SCp->request_bufflen = sizeof(SCp->sense_buffer);
slot->dma_handle = pci_map_single(hostdata->pci_dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), PCI_DMA_FROMDEVICE);
slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
slot->SG[0].pAddr = bS_to_host(slot->dma_handle);
@@ -1519,7 +1527,7 @@
* of locking in queuecommand: 1) io_request_lock then 2)
* hostdata->lock would be the reverse of taking it in this
* routine */
- spin_lock_irqsave(&io_request_lock, flags);
+ spin_lock_irqsave(host->host_lock, flags);
if((istat = NCR_700_readb(host, ISTAT_REG))
& (SCSI_INT_PENDING | DMA_INT_PENDING)) {
__u32 dsps;
@@ -1764,7 +1772,7 @@
}
}
out_unlock:
- spin_unlock_irqrestore(&io_request_lock, flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
}
/* FIXME: Need to put some proc information in and plumb it
Index: linux/2.5/drivers/scsi/53c700.h
diff -u linux/2.5/drivers/scsi/53c700.h:1.1.1.1 linux/2.5/drivers/scsi/53c700.h:1.1.1.1.20.1
--- linux/2.5/drivers/scsi/53c700.h:1.1.1.1 Sun Dec 9 12:08:58 2001
+++ linux/2.5/drivers/scsi/53c700.h Wed Jan 16 13:49:02 2002
@@ -210,7 +210,7 @@
struct NCR_700_Host_Parameters {
/* These must be filled in by the calling driver */
int clock; /* board clock speed in MHz */
- __u32 base; /* the base for the port (copied to host) */
+ unsigned long base; /* the base for the port (copied to host) */
struct pci_dev *pci_dev;
__u32 dmode_extra; /* adjustable bus settings */
__u32 differential:1; /* if we are differential */
@@ -234,10 +234,6 @@
__u32 *script; /* pointer to script location */
__u32 pScript; /* physical mem addr of script */
- /* This will be the host lock. Unfortunately, we can't use it
- * at the moment because of the necessity of holding the
- * io_request_lock */
- spinlock_t lock;
enum NCR_700_Host_State state; /* protected by state lock */
Scsi_Cmnd *cmd;
/* Note: pScript contains the single consistent block of
@@ -503,7 +499,7 @@
static inline __u32
NCR_700_readl(struct Scsi_Host *host, __u32 reg)
{
- __u32 value = readl(host->base + reg);
+ __u32 value = __raw_readl(host->base + reg);
const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
#if 1
@@ -536,7 +532,7 @@
BUG();
#endif
- writel(bS_to_host(value), host->base + reg);
+ __raw_writel(bS_to_host(value), host->base + reg);
}
#elif defined(CONFIG_53C700_IO_MAPPED)
static inline __u8
Index: linux/2.5/drivers/scsi/53c700.scr
diff -u linux/2.5/drivers/scsi/53c700.scr:1.1.1.1 linux/2.5/drivers/scsi/53c700.scr:1.1.1.1.20.1
--- linux/2.5/drivers/scsi/53c700.scr:1.1.1.1 Sun Dec 9 12:08:58 2001
+++ linux/2.5/drivers/scsi/53c700.scr Wed Jan 16 13:49:02 2002
@@ -242,7 +242,7 @@
SendIdentifyMsg:
CALL SendMessage
- JUMP SendCommand
+ CLEAR ATN
IgnoreMsgBeforeCommand:
CLEAR ACK
Index: linux/2.5/drivers/scsi/NCR_D700.c
diff -u linux/2.5/drivers/scsi/NCR_D700.c:1.1.1.1 linux/2.5/drivers/scsi/NCR_D700.c:1.1.1.1.20.1
--- linux/2.5/drivers/scsi/NCR_D700.c:1.1.1.1 Sun Dec 9 12:08:58 2001
+++ linux/2.5/drivers/scsi/NCR_D700.c Wed Jan 16 13:49:02 2002
@@ -36,6 +36,10 @@
/* CHANGELOG
*
+ * Version 2.2
+ *
+ * Added mca_set_adapter_name().
+ *
* Version 2.1
*
* Modularise the driver into a Board piece (this file) and a chip
@@ -86,7 +90,7 @@
* disconnections and reselections are being processed correctly.
* */
-#define NCR_D700_VERSION "2.1"
+#define NCR_D700_VERSION "2.2"
#include <linux/config.h>
#include <linux/version.h>
@@ -299,6 +303,7 @@
continue;
}
found++;
+ mca_set_adapter_name(slot, "NCR D700 SCSI Adapter (version " NCR_D700_VERSION ")");
}
}
Index: linux/2.5/drivers/scsi/lasi700.c
diff -u linux/2.5/drivers/scsi/lasi700.c:1.1.1.1 linux/2.5/drivers/scsi/lasi700.c:1.1.1.1.20.1
--- linux/2.5/drivers/scsi/lasi700.c:1.1.1.1 Sun Dec 9 12:08:58 2001
+++ linux/2.5/drivers/scsi/lasi700.c Wed Jan 16 13:49:02 2002
@@ -136,7 +136,6 @@
lasi700_driver_callback(struct parisc_device *dev)
{
unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET;
- int irq = busdevice_alloc_irq(dev);
char *driver_name;
struct Scsi_Host *host;
struct NCR_700_Host_Parameters *hostdata =
@@ -170,14 +169,15 @@
hostdata->chip710 = 1;
hostdata->dmode_extra = DMODE_FC2;
}
+ hostdata->pci_dev = ccio_get_fake(dev);
if((host = NCR_700_detect(host_tpnt, hostdata)) == NULL) {
kfree(hostdata);
release_mem_region(host->base, 64);
return 1;
}
- host->irq = irq;
- if(request_irq(irq, NCR_700_intr, SA_SHIRQ, driver_name, host)) {
- printk(KERN_ERR "%s: irq problem, detatching\n",
+ host->irq = dev->irq;
+ if(request_irq(dev->irq, NCR_700_intr, SA_SHIRQ, driver_name, host)) {
+ printk(KERN_ERR "%s: irq problem, detaching\n",
driver_name);
scsi_unregister(host);
NCR_700_release(host);
@@ -197,6 +197,7 @@
kfree(hostdata);
free_irq(host->irq, host);
release_mem_region(host->base, 64);
+ unregister_parisc_driver(&lasi700_driver);
return 1;
}
--==_Exmh_-17466361920--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/