> Hi Dave,
> This patch enables thermal monitoring on P4/Xeon and also installs
> an interrupt handler to take notification of thermal state transitions.
> Its currently untested, so input would be appreciated.
>
> Thanks,
> Zwane
>
>
argh...
diff -ur linux-2.5-dj-orig/arch/i386/kernel/apic.c linux-2.5.5-dj/arch/i386/kernel/apic.c
--- linux-2.5-dj-orig/arch/i386/kernel/apic.c Sat Mar 23 21:10:58 2002
+++ linux-2.5.5-dj/arch/i386/kernel/apic.c Sat Mar 23 20:43:18 2002
@@ -449,6 +449,7 @@
unsigned int apic_lvterr;
unsigned int apic_tmict;
unsigned int apic_tdcr;
+ unsigned int apic_thmr;
} apic_pm_state;
static void apic_pm_suspend(void *data)
@@ -470,6 +471,7 @@
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
+ apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
__save_flags(flags);
__cli();
disable_local_APIC();
@@ -498,6 +500,7 @@
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+ apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
diff -ur linux-2.5-dj-orig/arch/i386/kernel/bluesmoke.c linux-2.5.5-dj/arch/i386/kernel/bluesmoke.c
--- linux-2.5-dj-orig/arch/i386/kernel/bluesmoke.c Sat Mar 23 21:10:58 2002
+++ linux-2.5.5-dj/arch/i386/kernel/bluesmoke.c Tue Mar 26 22:52:59 2002
@@ -8,6 +8,8 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
+#include <asm/apic.h>
+#include <asm/hw_irq.h>
#ifdef CONFIG_X86_MCE
@@ -16,6 +18,86 @@
static int banks;
/*
+ * P4/Xeon Thermal transition interrupt handler
+ */
+
+static void intel_thermal_interrupt(struct pt_regs *regs, long error_code)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ u32 l, h;
+ unsigned int cpu = smp_processor_id();
+
+ ack_APIC_irq();
+
+ rdmsr(MSR_IA32_THERM_STATUS, l, h);
+ if (l & 1) {
+ printk(KERN_EMERG "CPU#%d: Temperature above threshold\n", cpu);
+ printk(KERN_EMERG "CPU#%d: Running in modulated clock mode\n", cpu);
+ } else {
+ printk(KERN_INFO "CPU#%d: Temperature/speed normal\n", cpu);
+ }
+#endif
+}
+
+static void unexpected_thermal_interrupt(struct pt_regs * regs, long error_code)
+{
+ printk(KERN_ERR "CPU#%d: Unexpected LVT TMR interrupt!\n", smp_processor_id());
+}
+
+/*
+ * Thermal interrupt handler for this CPU setup
+ */
+
+void (*thermal_monitor)(struct pt_regs *, long error_code) = unexpected_thermal_interrupt;
+
+
+/* P4/Xeon Thermal regulation detect and init */
+
+static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ u32 l, h;
+ unsigned int cpu = smp_processor_id();
+
+ /* Thermal monitoring */
+ if (!test_bit(X86_FEATURE_ACPI, &c->x86_capability))
+ return; /* -ENODEV */
+
+ /* Clock modulation */
+ if (!test_bit(X86_FEATURE_ACC, &c->x86_capability))
+ return; /* -ENODEV */
+
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ /* first check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already -zwanem.
+ */
+ if (l & (1<<3)) {
+ printk(KERN_DEBUG "CPU#%d: Thermal monitoring already enabled\n", cpu);
+ return; /* -EBUSY */
+ }
+
+ wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+ printk(KERN_INFO "CPU#%d: Thermal monitoring enabled\n", cpu);
+
+ /* The temperature transition interrupt handler setup */
+ l = THERMAL_APIC_VECTOR; /* our delivery vector */
+ l |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
+ apic_write_around(APIC_LVTTHMR, l);
+
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x3 , h);
+
+ /* ok we're good to go... */
+ thermal_monitor = intel_thermal_interrupt;
+ l = apic_read(APIC_LVTTHMR);
+ apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+ return;
+#endif
+}
+
+/*
* Machine Check Handler For PII/PIII
*/
@@ -236,6 +318,9 @@
}
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+
+ intel_init_thermal(c);
+
done=1;
}
@@ -317,5 +402,6 @@
#else
asmlinkage void do_machine_check(struct pt_regs * regs, long error_code) {}
+void thermal_monitor(struct pt_regs * regs, long error_code) {}
void __init mcheck_init(struct cpuinfo_x86 *c) {}
#endif
diff -ur linux-2.5-dj-orig/arch/i386/kernel/traps.c linux-2.5.5-dj/arch/i386/kernel/traps.c
--- linux-2.5-dj-orig/arch/i386/kernel/traps.c Sat Mar 23 21:10:58 2002
+++ linux-2.5.5-dj/arch/i386/kernel/traps.c Tue Mar 26 22:57:03 2002
@@ -88,7 +88,7 @@
asmlinkage void alignment_check(void);
asmlinkage void spurious_interrupt_bug(void);
asmlinkage void machine_check(void);
-
+asmlinkage void thermal_monitor(void);
int kstack_depth_to_print = 24;
@@ -995,8 +995,10 @@
set_trap_gate(17,&alignment_check);
set_trap_gate(18,&machine_check);
set_trap_gate(19,&simd_coprocessor_error);
-
+
set_system_gate(SYSCALL_VECTOR,&system_call);
+ set_intr_gate(THERMAL_APIC_VECTOR, &thermal_monitor);
+
/*
* default LDT is a single-entry callgate to lcall7 for iBCS
diff -ur linux-2.5-dj-orig/include/asm-i386/apicdef.h linux-2.5.5-dj/include/asm-i386/apicdef.h
--- linux-2.5-dj-orig/include/asm-i386/apicdef.h Sun Aug 12 20:13:59 2001
+++ linux-2.5.5-dj/include/asm-i386/apicdef.h Sat Mar 23 22:35:06 2002
@@ -71,6 +71,7 @@
#define GET_APIC_DEST_FIELD(x) (((x)>>24)&0xFF)
#define SET_APIC_DEST_FIELD(x) ((x)<<24)
#define APIC_LVTT 0x320
+#define APIC_LVTTHMR 0x330
#define APIC_LVTPC 0x340
#define APIC_LVT0 0x350
#define APIC_LVT_TIMER_BASE_MASK (0x3<<18)
@@ -280,7 +281,16 @@
u32 __reserved_4[3];
} lvt_timer;
-/*330*/ struct { u32 __reserved[4]; } __reserved_15;
+/*330*/ struct { /* LVT - Thermal Sensor */
+ u32 vector : 8,
+ delivery_mode : 3,
+ __reserved_1 : 1,
+ delivery_status : 1,
+ __reserved_2 : 3,
+ mask : 1,
+ __reserved_3 : 15;
+ u32 __reserved_4[3];
+ } lvt_thermal;
/*340*/ struct { /* LVT - Performance Counter */
u32 vector : 8,
diff -ur linux-2.5-dj-orig/include/asm-i386/hw_irq.h linux-2.5.5-dj/include/asm-i386/hw_irq.h
--- linux-2.5-dj-orig/include/asm-i386/hw_irq.h Sat Mar 23 21:09:51 2002
+++ linux-2.5.5-dj/include/asm-i386/hw_irq.h Tue Mar 26 23:19:56 2002
@@ -56,6 +56,7 @@
* levels. (0x80 is the syscall vector)
*/
#define FIRST_DEVICE_VECTOR 0x31
+#define THERMAL_APIC_VECTOR 0x32 /* Thermal monitor local vector */
#define FIRST_SYSTEM_VECTOR 0xef
extern int irq_vector[NR_IRQS];
diff -ur linux-2.5-dj-orig/include/asm-i386/msr.h linux-2.5.5-dj/include/asm-i386/msr.h
--- linux-2.5-dj-orig/include/asm-i386/msr.h Sat Mar 23 21:11:06 2002
+++ linux-2.5.5-dj/include/asm-i386/msr.h Sat Mar 23 18:35:47 2002
@@ -60,6 +60,11 @@
#define MSR_P6_EVNTSEL0 0x186
#define MSR_P6_EVNTSEL1 0x187
+#define MSR_IA32_THERM_CONTROL 0x19a
+#define MSR_IA32_THERM_INTERRUPT 0x19b
+#define MSR_IA32_THERM_STATUS 0x19c
+#define MSR_IA32_MISC_ENABLE 0x1a0
+
#define MSR_IA32_DEBUGCTLMSR 0x1d9
#define MSR_IA32_LASTBRANCHFROMIP 0x1db
#define MSR_IA32_LASTBRANCHTOIP 0x1dc
-- http://function.linuxpower.ca- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/