Re: IDE/raid performance

Baldur Norddahl (bbn-linux-kernel@clansoft.dk)
Wed, 17 Apr 2002 16:00:45 +0200


Quoting Mike Dresser (mdresser_l@windsormachine.com):
> On Wed, 17 Apr 2002, Baldur Norddahl wrote:
>
> > Hi,
> >
> > I have been doing some simple benchmarks on my IDE system. It got 12 disks
> > and a system disk. The 12 disks are organized in two raids like this:
>
> What is the exact hardware configuration of the system, besides the disk?
> CPU/Motherboard/etc?

Motherboard: Tyan Tiger MPX S2466N
Chipset: AMD 760MPX
CPU: Dual Athlon MP 1800+ 1.53 GHz
Two Promise Technology UltraDMA133 TX2 controllers
Two Promise Technology UltraDMA100 TX2 controllers
Matrox G200 AGP video card.
1 GB registered DDR RAM

> > hdq: dma_intr: bad DMA status (dma_stat=35)
> > hdq: dma_intr: status=0x50 { DriveReady SeekComplete }
> > hdq: dma_intr: bad DMA status (dma_stat=35)
> > hdq: dma_intr: status=0x50 { DriveReady SeekComplete }
> > hdt: dma_intr: bad DMA status (dma_stat=75)
> > hdt: dma_intr: status=0x50 { DriveReady SeekComplete }
>
> I'd take a look at the cable on hdq and hdt. Try replacing it, and see
> what happens.

It happens randomly for all disks on the promise controllers. Never for the
system disk on hda (on the motherboard buildin controller). The above was
just a random snippet from dmesg, there is alot more of the same spam.

> Also, with 12 hd's, dual cpu's, etc, what kind of power supply are you
> using?

It is a 350W powersupply. I wanted something bigger, but couldn't get it for
sane prices. I can't rule out that it is overloaded of course. If it is, I
haven't seen any other symptoms, the system is rock stable so far.

Baldur
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/