1.
`modprobe agpgart` locks machine badly
2.
When I try to insmod or modprobe agpgart my computer locks up very
badly. I cannot even use another machine to remotely log in and it
stops responding to all network traffic. I have tried many different
2.4.x versions and also many kernel configs, as well as trying
--try-unsupported.
3.
agpgart kernel lock
4.
Linux version 2.4.18 (root@mycomp) (gcc version 2.95.4 20011002 (Debian
prerelease)) #2 SMP Wed Apr 10 20:56:20 EDT 2002
5.
I dont have an oops but i do have a `strace insmod agpgart`, but there
doesn't seem to be much in it. I will include it later.
6.
`modprobe agpgart`
7.1
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux mycomp 2.4.18 #2 SMP Wed Apr 10 20:56:20 EDT 2002 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded
7.2
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 501.146
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 999.42
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 501.146
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 999.42
7.3
N/A
7.4
ioports:
--------------------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
1000-10ff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
1000-10ff : aic7xxx
1400-14ff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2)
1400-14ff : aic7xxx
1800-183f : Intel Corp. 82557 [Ethernet Pro 100]
1800-183f : eepro100
1840-185f : Intel Corp. 82371AB PIIX4 USB
1840-185f : usb-uhci
1860-186f : Intel Corp. 82371AB PIIX4 IDE
1860-1867 : ide0
1868-186f : ide1
8000-803f : Intel Corp. 82371AB PIIX4 ACPI
9000-9fff : PCI Bus #02
9000-903f : Ensoniq 5880 AudioPCI
9000-903f : es1371
e800-e81f : Intel Corp. 82371AB PIIX4 ACPI
iomem:
-------------
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c9000-000ce7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002993c6 : Kernel code
002993c7-0032421f : Kernel data
1fff0000-1ffffbff : ACPI Tables
1ffffc00-1fffffff : ACPI Non-volatile Storage
fa000000-fa0fffff : Intel Corp. 82557 [Ethernet Pro 100]
fa100000-fa100fff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
fa100000-fa100fff : aic7xxx
fa101000-fa101fff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2)
fa101000-fa101fff : aic7xxx
fa102000-fa102fff : Intel Corp. 82557 [Ethernet Pro 100]
fa102000-fa102fff : eepro100
fa200000-faffffff : PCI Bus #01
fa200000-fa203fff : Matrox Graphics, Inc. MGA G550 AGP
fa800000-faffffff : Matrox Graphics, Inc. MGA G550 AGP
fc000000-fdffffff : PCI Bus #01
fc000000-fdffffff : Matrox Graphics, Inc. MGA G550 AGP
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fffeac00-ffffffff : reserved
7.500:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at <unassigned> (32-bit, prefetchable)
[size=256M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev
03) (prog-
if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fa200000-faffffff
Prefetchable memory behind bridge: fc000000-fdffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:04.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if
80 [Maste
r])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 1860 [size=16]
00:04.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if
00 [UHCI
])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
00:04.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:05.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx /
AIC-7895 (rev
04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD
AIC-7895B
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 1000 [disabled] [size=256]
Region 1: Memory at fa100000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx /
AIC-7895 (rev
04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD
AIC-7895B
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max)
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 1400 [disabled] [size=256]
Region 1: Memory at fa101000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
08)
Subsystem: Hewlett-Packard Company: Unknown device 10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fa102000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at 1800 [size=64]
Region 2: Memory at fa000000 (32-bit, non-prefetchable)
[size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot
+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
(prog-i
f 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 57, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=52
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge:
00000000fff00000-0000000000000000
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
PME(D0-,D1-,D2-,D3h
ot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP
(rev 01) (
prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR
32Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 128 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fa200000 (32-bit, non-prefetchable)
[size=16K]
Region 2: Memory at fa800000 (32-bit, non-prefetchable)
[size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
02:02.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq: Unknown device 2003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+
<MAbort- >SERR- <PERR-
Latency: 96 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 9000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: 9.10GB B 68-8C02 Rev:
Type: Direct-Access ANSI SCSI revision: 02
7.7
Not sure what else woudl be needed
8
this is my strace output from `strace modprobe agpgart`
-------------------------------------------------------------
execve("/sbin/modprobe", ["modprobe", "agpgart"], [/* 14 vars */]) = 0
uname({sys="Linux", node="mycomp", ...}) = 0
brk(0) = 0x805dd20
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=38361, ...}) = 0
old_mmap(NULL, 38361, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40014000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0H\222\1"...,
1024) = 102
4
fstat64(3, {st_mode=S_IFREG|0755, st_size=1153816, ...}) = 0
old_mmap(NULL, 1166592, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x4001e000
mprotect(0x40131000, 40192, PROT_NONE) = 0
old_mmap(0x40131000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x11
3000) = 0x40131000
old_mmap(0x40137000, 15616, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANON
YMOUS, -1, 0) = 0x40137000
close(3) = 0
munmap(0x40014000, 38361) = 0
getuid32() = 0
geteuid32() = 0
uname({sys="Linux", node="mycomp", ...}) = 0
brk(0) = 0x805dd20
brk(0x805dd40) = 0x805dd40
brk(0x805e000) = 0x805e000
brk(0x805f000) = 0x805f000
brk(0x8060000) = 0x8060000
brk(0x8061000) = 0x8061000
brk(0x8062000) = 0x8062000
open("/etc/modules.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=4454, ...}) = 0
stat64("/etc/modules.conf", {st_mode=S_IFREG|0644, st_size=4454, ...}) =
0
stat64("/etc/conf.modules", 0xbfffad9c) = -1 ENOENT (No such file or
directory)
fstat64(3, {st_mode=S_IFREG|0644, st_size=4454, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x40014000
read(3, "### This file is automatically g"..., 4096) = 4096
brk(0x8063000) = 0x8063000
read(3, "c/init.d/setserial modsave > /d"..., 4096) = 358
read(3, "", 4096) = 0
close(3) = 0
munmap(0x40014000, 4096) = 0
open("/lib/modules/2.4.18/modules.dep", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=108, ...}) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=108, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x40014000
read(3, "/lib/modules/2.4.18/kernel/drive"..., 4096) = 108
read(3, "", 4096) = 0
close(3) = 0
munmap(0x40014000, 4096) = 0
query_module(NULL, 0, NULL, 0) = 0
query_module(NULL, QM_MODULES, { /* 0 entries */ }, 0) = 0
chdir("/var/log/ksymoops") = 0
time(NULL) = 1019615771
open("/etc/localtime", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1267, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x40014000
read(3, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0"...,
4096) = 126
7
close(3) = 0
munmap(0x40014000, 4096) = 0
open("20020423.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=6070, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x40014000
fstat64(3, {st_mode=S_IFREG|0644, st_size=6070, ...}) = 0
_llseek(3, 6070, [6070], SEEK_SET) = 0
write(3, "20020423 223611 start modprobe a"..., 50) = 50
fdatasync(3) = 0
close(3) = 0
munmap(0x40014000, 4096) = 0
open("/lib/modules/2.4.18/kernel/drivers/char/agp/agpgart.o", O_RDONLY)
= 3
flock(3, LOCK_EX) = 0
query_module(NULL, 0, NULL, 0) = 0
query_module(NULL, QM_MODULES, { /* 0 entries */ }, 0) = 0
brk(0x8068000) = 0x8068000
query_module(NULL, QM_SYMBOLS, 0x80628c0, 16384, 48653) = -1 ENOSPC (No
space le
ft on device)
brk(0x8074000) = 0x8074000
query_module(NULL, QM_SYMBOLS, { /* 1294 entries */ }, 1294) = 0
lseek(3, 0, SEEK_SET) = 0
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\1\0\3\0\1\0\0\0\0\0\0\0"...,
52) = 52
lseek(3, 33428, SEEK_SET) = 33428
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
840) = 840
brk(0x807b000) = 0x807b000
lseek(3, 64, SEEK_SET) = 64
read(3, "\213T$\4\241\30\0\0\0\205\300u\0041\300\303\303\213@\20"...,
25824) = 2
5824
lseek(3, 34268, SEEK_SET) = 34268
read(3, "\5\0\0\0\1\17\0\0^\0\0\0\1\17\0\0\350\0\0\0\2\26\1\0\364"...,
14672) =
14672
lseek(3, 25888, SEEK_SET) = 25888
read(3, "\301\341\2\3518\20\0\0\301\341\2A\351D\20\0\0\301\341\2"...,
160) = 160
lseek(3, 48940, SEEK_SET) = 48940
read(3, "\4\0\0\0\2\1\0\0\r\0\0\0\2\1\0\0\30\0\0\0\2\1\0\0$\0\0"...,
104) = 104
lseek(3, 26048, SEEK_SET) = 26048
read(3, "/home/abrotman/kernel/linux/incl"..., 4128) = 4128
lseek(3, 49044, SEEK_SET) = 49044
read(3, "\20\4\0\0\1\1\0\0\24\4\0\0\1\1\0\0\30\4\0\0\1\1\0\0\34"...,
528) = 528
lseek(3, 30176, SEEK_SET) = 30176
read(3, "kernel_version=2.4.18\0using_chec"..., 288) = 288
lseek(3, 30464, SEEK_SET) = 30464
read(3, ":\20\0\0\0\0\0\0E\20\0\0\10\0\0\0G\20\0\0\v\0\0\0U\20\0"...,
168) = 168
lseek(3, 49572, SEEK_SET) = 49572
read(3, "\0\0\0\0\1\1\0\0\4\0\0\0\1\3\0\0\10\0\0\0\1\1\0\0\f\0\0"...,
336) = 336
lseek(3, 30656, SEEK_SET) = 30656
read(3, "agp_free_memory_Rsmp_48653576\0\0\0"..., 320) = 320
lseek(3, 30976, SEEK_SET) = 30976
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 64)
= 64
lseek(3, 49908, SEEK_SET) = 49908
read(3, "\0\0\0\0\1#\1\0\4\0\0\0\1\370\0\0\10\0\0\0\1\20\1\0\f\0"...,
128) = 128
brk(0x807c000) = 0x807c000
lseek(3, 31040, SEEK_SET) = 31040
read(3, "\0\0\0\0\0\0\0\0|\17\0\0\204\17\0\0\0\0\0\0\0\0\0\0\200"...,
2112) = 21
12
lseek(3, 50036, SEEK_SET) = 50036
read(3, "\0\0\0\0\1\350\0\0\4\0\0\0\1\371\0\0\10\0\0\0\1\1\0\0\f"...,
1136) = 11
36
lseek(3, 33152, SEEK_SET) = 33152
read(3, "\0GCC: (GNU) 2.95.4 20011002 (Deb"..., 96) = 96
lseek(3, 33288, SEEK_SET) = 33288
read(3, "\0.symtab\0.strtab\0.shstrtab\0.rel."..., 137) = 137
brk(0x807e000) = 0x807e000
lseek(3, 51172, SEEK_SET) = 51172
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4784) = 478
4
brk(0x8080000) = 0x8080000
lseek(3, 55956, SEEK_SET) = 55956
read(3, "\0agpgart_fe.c\0gcc2_compiled.\0__m"..., 6089) = 6089
brk(0x8081000) = 0x8081000
brk(0x8082000) = 0x8082000
brk(0x8083000) = 0x8083000
open("/proc/sys/kernel/tainted", O_RDWR) = 4
close(4) = 0
lstat64("/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/lib/modules", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/lib/modules/2.4.18", {st_mode=S_IFDIR|0755, st_size=4096,
...}) = 0
lstat64("/lib/modules/2.4.18/kernel", {st_mode=S_IFDIR|0755,
st_size=4096, ...})
= 0
lstat64("/lib/modules/2.4.18/kernel/drivers", {st_mode=S_IFDIR|0755,
st_size=409
6, ...}) = 0
lstat64("/lib/modules/2.4.18/kernel/drivers/char",
{st_mode=S_IFDIR|0755, st_siz
e=4096, ...}) = 0
lstat64("/lib/modules/2.4.18/kernel/drivers/char/agp",
{st_mode=S_IFDIR|0755, st
_size=4096, ...}) = 0
lstat64("/lib/modules/2.4.18/kernel/drivers/char/agp/agpgart.o",
{st_mode=S_IFRE
G|0644, st_size=62045, ...}) = 0
stat64("/lib/modules/2.4.18/kernel/drivers/char/agp/agpgart.o",
{st_mode=S_IFREG
|0644, st_size=62045, ...}) = 0
create_module("agpgart", 33504) = 0xe084f000
brk(0x808c000) = 0x808c000
init_module("agpgart", 0x80825e0
-------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/