Re: Reiserfs has killed my root FS!?!

Eugenio Mastroviti (eugeniom@gointernet.co.uk)
Tue, 14 May 2002 10:28:36 +0100


Oleg Drokin wrote:

> First of all make sure that your raid array same up fully.
> This is very important! Check all the partitions if they are of correct size.

Already done. I booted with the rescue system from the installation CD
and I rewrote /etc/raidtab. The partition table seems OK, the partitions
have the correct sizes and the correct types.
The raid array starts fine and /proc/mdstat reports everything OK

> Then do rebild-sb and choose more correct superblock version (if asked).
> If you are not asked for the fs version, that's bad. Let us know then.

Just done that.
It's asked me the fs type and I've entered the one you told me. It
seemed to work. I ran --rebuild-tree after that and it started replaying
the journal - which it had not done before - but then it still died with
"wrong superblock". The exact message is:

init_source_bitmap: bitmap 0 (of 6450048 bits) is wrong - make all
blocks [0-32768] as used

init_control_bitmap: wrong super block

I guess I made things worse with my initial attempt as rebuilding the
superblock.

BTW - I tried, as I have nothing to lose at this point :) - to re-do
--rebuild-sb and now it doesn't ask for the version

> Thanks for your report.

Thanks very much for your help

Eugenio

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/