Re: sg in 2.4.18

[Andre Hedrick]

On Thu, 16 May 2002, Mike Fedyk wrote:

> On Mon, May 13, 2002 at 11:41:30AM -0400, Justin Piszcz wrote:
> > Also, putting both burners on the same chain currently does not work.
> > Because when cdrecord sends the command to FIX the cd after it is done
> > burning the data, the command gets sent to both IDE drives causing cdrecord
> > to blow up (the burn fails) on the other burner.
> 
> Hmm, I wonder in Andre can say anyting about this.

The short answer is the driver currently does not support proper overlap
and release of the bus (channel/hwif).  Until this is committed to code to
support a multi-threaded request to schedule on service priorities, it is
not doable.  Burn-Proof will greatly assist in a solution, as a means to
force the device to spin while doing dual burns.  Thus some means for a
channel/hwif merging queue is needed.  I have a partial whiteboard
solution but it is incomplete.

> What kernel version are you running?
> 
> Can you post the output of lspci?
> 
> With both drives running at the same time, each on a seperate cable and
> controller, I was able to write without trouble.
> 
> 00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
> 00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
> 00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
> 00:07.2 USB Controller: Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II]
> (rev 01)
> 00:08.0 VGA compatible controller: Trident Microsystems TGUI 9660/968x/968x
> (rev d3)
> 00:09.0 Unknown mass storage controller: Promise Technology, Inc. 20262 (rev
> 01)
> 00:0a.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 02)
> 00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
> 

Andre Hedrick
LAD Storage Consulting Group