Re: computer reboots before "Uncompressing Linux..." with 2.5.19-xfs

[J.S.Souza]

I had the exact same problem and few were able to help.  However, here's what 
I found was _my_ problem.  I wasn't enabling the x86 options in the kernel 
(duh!).  Make sure that when you compile, you enable "Intel IA32 CPU 
Microcode Support" and "Model Specific Register Support".  What I ended up 
doing was taking a stock RedHat .config file for i386 and looking at what 
they did for their options and started to delete things from there that I 
don't use or need.  Eventually, I just learned what was necessary for a basic 
i386 kernel.  Although I was compiling for 2.4.17 kernel.  Good luck, hope 
this was of some help.

			J.S.Souza

On Tuesday 11 June 2002 05:22 pm, xsdg wrote:
> Hola...
> I'm trying to get kernel 2.5.19-xfs working on one of my boxes...  The box
> is a P200-MMX, currently running 2.5.7-xfs and using grub as the
> bootloader.  Each time I try to boot the kernel, grub tells me...
>
> root (hd0,0)
>  Filesystem type is ext2fs, partition type 0x83
> kernel /boot/kernels/19.5.2k-xfs single
>  [Linux-bzImage, setup=0x1400, size=0x134aff]
>
> Then, after a small pause, the box reboots (note: it does _not_ print
> "Uncompressing Linux...").  I have tried the following:
> 1) Compile the kernel, optimized for P-MMX, on another box (PII-350
> Deschutes) using gcc 2.95.4
> 2) Recompile bzImage
> 3) Recompile bzImage
> 4) Remove framebuffer support.  Remove vid mode selection support. 
> Optimize for Pentium-Classic.  Recompile with everything else the same
> 5) Recompile on target box (gcc 2.95.4 also) with options the same as after
> #4
>
> All of my boxes are running Debian SID (not necessarily up-to-date).  I
> asked a number of times in #kernelnewbies on OPN, to no avail.  Any and all
> help would be greatly appreciated. (Please CC me in replies)
>
> 	--xsdg