RE: Unable to use Actiontec 56K Internal PCI Call Waiting modem w

[Ed Vance]

On Thu, July 18, 2002 at 9:26 AM, [e-mail] wrote:
> 
> [1.] One line summary of the problem:
> Unable to use "Actiontec 56K Internal PCI Call Waiting modem" with 
> linux 2.4.19-rc2 kernel
> 
> [2.] Full description of the problem/report:
> 
> When I issue the following command to setup my serial port I get 
> the error:
> 
> root@delta:~# setserial /dev/ttyS2 uart 16550A port 0x9000 irq 5
> Cannot set serial info: Address already in use

... [snip] ...

> [7.7.] Other information that might be relevant to the problem
>        (please look in /proc and include all information that you
>        think to be relevant):
> 
> /proc/tty/driver/serial
> serinfo:1.0 driver:5.05c revision:2001-07-08
> 0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0
> 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0
> 4: uart:16550A port:9000 irq:5 baud:9600 tx:0 rx:0 CTS|DSR
> 
> ...

Hi,

Are you sure you need to use setserial on the new kernel? It looks like 
the serial driver found the modem and presented it at /dev/ttyS4. 

Best regards,
Ed

---------------------------------------------------------------- 
Ed Vance              [e-mail]
Macrolink, Inc.       1500 N. Kellogg Dr  Anaheim, CA  92807
----------------------------------------------------------------