8139too cannot receive pkts in 2.4.19-rc3

Ben Greear (greearb@candelatech.com)
Sun, 28 Jul 2002 23:54:57 -0700


I just upgraded a SpaceWalker SV-50 machine with a builtin Realtek
nic. The NIC can no longer receive pkts it seems. It can transmit
fine, as witnessed by other machines on the network.

lspci says the realtek is:
RTL-8139/8139C (rev 10)

The NIC is plugged into a 10bt hub.

The messages in /var/log/messages look like:

NETDEV WATCHDOG: eth0: transmit timed out
eth0: Setting half-duplex based on auto-negotiated partner ability 0000

I tested in on a 100bt-FD switch, and it failed there too, though it
did have a message in the log about negotiating 100bt-FD.

This works in stock RH 7.3 kernel.

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/