diff -urN linux-2.4.19-rc3/drivers/scsi/Config.in linux-2.4.19-s390/drivers/scsi/Config.in
--- linux-2.4.19-rc3/drivers/scsi/Config.in Tue Jul 30 09:02:28 2002
+++ linux-2.4.19-s390/drivers/scsi/Config.in Tue Jul 30 09:02:54 2002
@@ -45,6 +45,8 @@
if [ "$CONFIG_PCI" = "y" ]; then
dep_tristate '3ware Hardware ATA-RAID support' CONFIG_BLK_DEV_3W_XXXX_RAID $CONFIG_SCSI
fi
+
+if [ "$CONFIG_ARCH_S390" != "y" ]; then
dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
dep_tristate 'ACARD SCSI support' CONFIG_SCSI_ACARD $CONFIG_SCSI
dep_tristate 'Adaptec AHA152X/2825 support' CONFIG_SCSI_AHA152X $CONFIG_SCSI
@@ -251,6 +253,12 @@
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
fi
+fi
+
+fi
+
+if [ "$CONFIG_ARCH_S390" = "y" ]; then
+dep_tristate 'IBM z900 FCP host bus adapter driver' CONFIG_ZFCP $CONFIG_QDIO
fi
endmenu
diff -urN linux-2.4.19-rc3/drivers/scsi/hosts.c linux-2.4.19-s390/drivers/scsi/hosts.c
--- linux-2.4.19-rc3/drivers/scsi/hosts.c Tue Jul 30 09:02:22 2002
+++ linux-2.4.19-s390/drivers/scsi/hosts.c Tue Jul 30 09:02:34 2002
@@ -81,13 +81,31 @@
struct Scsi_Host * scsi_hostlist;
struct Scsi_Device_Template * scsi_devicelist;
-int max_scsi_hosts;
-int next_scsi_host;
+int max_scsi_hosts; /* host_no for next new host */
+int next_scsi_host; /* count of registered scsi hosts */
void
scsi_unregister(struct Scsi_Host * sh){
struct Scsi_Host * shpnt;
Scsi_Host_Name *shn;
+ char name[10];
+
+ /* kill error handling thread */
+ if (sh->hostt->use_new_eh_code
+ && sh->ehandler != NULL) {
+ DECLARE_MUTEX_LOCKED(sem);
+
+ sh->eh_notify = &sem;
+ send_sig(SIGHUP, sh->ehandler, 1);
+ down(&sem);
+ sh->eh_notify = NULL;
+ }
+
+ /* remove proc entry */
+#ifdef CONFIG_PROC_FS
+ sprintf(name, "%d", sh->host_no);
+ remove_proc_entry(name, sh->hostt->proc_dir);
+#endif
if(scsi_hostlist == sh)
scsi_hostlist = sh->next;
@@ -107,6 +125,18 @@
if (shn) shn->host_registered = 0;
/* else {} : This should not happen, we should panic here... */
+#if 1
+ /* We shoult not decrement max_scsi_hosts (and make this value
+ * candidate for re-allocation by a different driver).
+ * Reason: the device is _still_ on the
+ * scsi_host_no_list and it's identified by its name. When the same
+ * device is re-registered it will get the same host_no again while
+ * new devices may use the allocation scheme and get this very same
+ * host_no.
+ * It's OK to have "holes" in the allocation but it does not mean
+ * "leaks".
+ */
+#else // if 0
/* If we are removing the last host registered, it is safe to reuse
* its host number (this avoids "holes" at boot time) (DB)
* It is also safe to reuse those of numbers directly below which have
@@ -121,7 +151,9 @@
break;
}
}
+#endif
next_scsi_host--;
+
kfree((char *) sh);
}
@@ -135,6 +167,7 @@
Scsi_Host_Name *shn, *shn2;
int flag_new = 1;
const char * hname;
+ char *name;
size_t hname_len;
retval = (struct Scsi_Host *)kmalloc(sizeof(struct Scsi_Host) + j,
(tpnt->unchecked_isa_dma && j ?
@@ -262,6 +295,35 @@
o_shp->next = retval;
}
}
+
+#ifdef CONFIG_PROC_FS
+ build_proc_dir_entry(retval);
+#endif
+
+ /* Start error handling thread */
+ if (retval->hostt->use_new_eh_code) {
+ DECLARE_MUTEX_LOCKED(sem);
+
+ retval->eh_notify = &sem;
+ kernel_thread((int (*)(void *)) scsi_error_handler,
+ (void *) retval, 0);
+
+ /*
+ * Now wait for the kernel error thread to initialize itself
+ * as it might be needed when we scan the bus.
+ */
+ down(&sem);
+ retval->eh_notify = NULL;
+ }
+
+ if (tpnt->info) {
+ name = (char *)tpnt->info(retval);
+ } else {
+ name = (char *)tpnt->name;
+ }
+ printk(KERN_INFO "scsi%d : %s\n", /* And print a little message */
+ retval->host_no, name);
+
return retval;
}
diff -urN linux-2.4.19-rc3/drivers/scsi/hosts.h linux-2.4.19-s390/drivers/scsi/hosts.h
--- linux-2.4.19-rc3/drivers/scsi/hosts.h Tue Jul 30 09:02:22 2002
+++ linux-2.4.19-s390/drivers/scsi/hosts.h Tue Jul 30 09:02:34 2002
@@ -464,7 +464,10 @@
extern Scsi_Host_Template * scsi_hosts;
-extern void build_proc_dir_entries(Scsi_Host_Template *);
+#ifdef CONFIG_PROC_FS
+extern void build_proc_dir(Scsi_Host_Template *);
+extern void build_proc_dir_entry(struct Scsi_Host *);
+#endif
/*
* scsi_init initializes the scsi hosts.
diff -urN linux-2.4.19-rc3/drivers/scsi/scsi.c linux-2.4.19-s390/drivers/scsi/scsi.c
--- linux-2.4.19-rc3/drivers/scsi/scsi.c Tue Jul 30 09:02:28 2002
+++ linux-2.4.19-s390/drivers/scsi/scsi.c Tue Jul 30 09:02:55 2002
@@ -533,22 +533,10 @@
SCpnt->target,
atomic_read(&SCpnt->host->host_active),
SCpnt->host->host_failed));
- if (SCpnt->host->host_failed != 0) {
- SCSI_LOG_ERROR_RECOVERY(5, printk("Error handler thread %d %d\n",
- SCpnt->host->in_recovery,
- SCpnt->host->eh_active));
- }
- /*
- * If the host is having troubles, then look to see if this was the last
- * command that might have failed. If so, wake up the error handler.
- */
- if (SCpnt->host->in_recovery
- && !SCpnt->host->eh_active
- && SCpnt->host->host_busy == SCpnt->host->host_failed) {
- SCSI_LOG_ERROR_RECOVERY(5, printk("Waking error handler thread (%d)\n",
- atomic_read(&SCpnt->host->eh_wait->count)));
- up(SCpnt->host->eh_wait);
- }
+
+ /* Note: The eh_thread is now started in scsi_bottom_half_handler for
+ * all cases except command timeout
+ */
spin_unlock_irqrestore(&device_request_lock, flags);
@@ -1296,26 +1284,38 @@
SCpnt->owner = SCSI_OWNER_ERROR_HANDLER;
SCpnt->state = SCSI_STATE_FAILED;
SCpnt->host->in_recovery = 1;
- /*
- * If the host is having troubles, then look to see if this was the last
- * command that might have failed. If so, wake up the error handler.
- */
- if (SCpnt->host->host_busy == SCpnt->host->host_failed) {
- SCSI_LOG_ERROR_RECOVERY(5, printk("Waking error handler thread (%d)\n",
- atomic_read(&SCpnt->host->eh_wait->count)));
- up(SCpnt->host->eh_wait);
- }
- } else {
- /*
- * We only get here if the error recovery thread has died.
- */
+ } else {
+ /* eh not present....trying to continue anyway */
scsi_finish_command(SCpnt);
- }
+ }
+ break;
+ } // switch
+ if (SCpnt->host->eh_wait != NULL) {
+ /*
+ * If the host is having troubles, then look to see if this was the last
+ * command that might have failed. If so, wake up the error handler.
+ */
+ if (SCpnt->host->in_recovery &&
+ !SCpnt->host->eh_active &&
+ (SCpnt->host->host_busy == SCpnt->host->host_failed)) {
+ SCSI_LOG_ERROR_RECOVERY(5, printk("Waking error handler thread (%d)\n",
+ atomic_read(&SCpnt->host->eh_wait->count)));
+ printk("(in_recovery=%d, host_busy=%d, host_failed=%d) "
+ "Waking error handler thread bh(%d)\n",
+ SCpnt->host->in_recovery,
+ SCpnt->host->host_busy,
+ SCpnt->host->host_failed,
+ atomic_read(&SCpnt->host->eh_wait->count));
+ up(SCpnt->host->eh_wait);
+ }
+ } else {
+ SCSI_LOG_ERROR_RECOVERY(5, printk("Warning: eh_thread not present\n"));
}
+
} /* for(; SCpnt...) */
-
+
} /* while(1==1) */
-
+
}
/*
@@ -1864,7 +1864,6 @@
struct Scsi_Host *shpnt;
Scsi_Device *SDpnt;
struct Scsi_Device_Template *sdtpnt;
- const char *name;
unsigned long flags;
int out_of_space = 0;
@@ -1896,6 +1895,11 @@
} else
tpnt->present = tpnt->detect(tpnt);
+ /* Add the new driver to /proc/scsi (directory only) */
+#ifdef CONFIG_PROC_FS
+ build_proc_dir(tpnt);
+#endif
+
if (tpnt->present) {
if (pcount == next_scsi_host) {
if (tpnt->present > 1) {
@@ -1917,45 +1921,6 @@
tpnt->next = scsi_hosts; /* Add to the linked list */
scsi_hosts = tpnt;
- /* Add the new driver to /proc/scsi */
-#ifdef CONFIG_PROC_FS
- build_proc_dir_entries(tpnt);
-#endif
-
-
- /*
- * Add the kernel threads for each host adapter that will
- * handle error correction.
- */
- for (shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) {
- if (shpnt->hostt == tpnt && shpnt->hostt->use_new_eh_code) {
- DECLARE_MUTEX_LOCKED(sem);
-
- shpnt->eh_notify = &sem;
- kernel_thread((int (*)(void *)) scsi_error_handler,
- (void *) shpnt, 0);
-
- /*
- * Now wait for the kernel error thread to initialize itself
- * as it might be needed when we scan the bus.
- */
- down(&sem);
- shpnt->eh_notify = NULL;
- }
- }
-
- for (shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) {
- if (shpnt->hostt == tpnt) {
- if (tpnt->info) {
- name = tpnt->info(shpnt);
- } else {
- name = tpnt->name;
- }
- printk(KERN_INFO "scsi%d : %s\n", /* And print a little message */
- shpnt->host_no, name);
- }
- }
-
/* The next step is to call scan_scsis here. This generates the
* Scsi_Devices entries
*/
@@ -2032,7 +1997,6 @@
struct Scsi_Device_Template *sdtpnt;
struct Scsi_Host *sh1;
struct Scsi_Host *shpnt;
- char name[10]; /* host_no>=10^9? I don't think so. */
/* get the big kernel lock, so we don't race with open() */
lock_kernel();
@@ -2134,18 +2098,6 @@
/*
* Next, kill the kernel error recovery thread for this host.
*/
- for (shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) {
- if (shpnt->hostt == tpnt
- && shpnt->hostt->use_new_eh_code
- && shpnt->ehandler != NULL) {
- DECLARE_MUTEX_LOCKED(sem);
-
- shpnt->eh_notify = &sem;
- send_sig(SIGHUP, shpnt->ehandler, 1);
- down(&sem);
- shpnt->eh_notify = NULL;
- }
- }
/* Next we free up the Scsi_Cmnd structures for this host */
@@ -2174,9 +2126,6 @@
if (shpnt->hostt != tpnt)
continue;
pcount = next_scsi_host;
- /* Remove the /proc/scsi directory entry */
- sprintf(name,"%d",shpnt->host_no);
- remove_proc_entry(name, tpnt->proc_dir);
if (tpnt->release)
(*tpnt->release) (shpnt);
else {
diff -urN linux-2.4.19-rc3/drivers/scsi/scsi.h linux-2.4.19-s390/drivers/scsi/scsi.h
--- linux-2.4.19-rc3/drivers/scsi/scsi.h Tue Jul 30 09:02:28 2002
+++ linux-2.4.19-s390/drivers/scsi/scsi.h Tue Jul 30 09:02:55 2002
@@ -390,6 +390,17 @@
#include <asm/pgtable.h>
#define CONTIGUOUS_BUFFERS(X,Y) \
(virt_to_phys((X)->b_data+(X)->b_size-1)+1==virt_to_phys((Y)->b_data))
+#elif defined(CONFIG_ARCH_S390) || defined(CONFIG_ARCH_S390X)
+#define _CONTIGUOUS_BUFFERS(xd, xs, yd, ys) \
+ (((xd + xs) == yd) \
+ && ((xd & PAGE_MASK) == ((yd + ys - 1) & PAGE_MASK)))
+
+#define CONTIGUOUS_BUFFERS(X,Y) \
+ _CONTIGUOUS_BUFFERS( \
+ (unsigned long)(X)->b_data, \
+ (unsigned long)(X)->b_size, \
+ (unsigned long)(Y)->b_data, \
+ (unsigned long)(Y)->b_size)
#else
#define CONTIGUOUS_BUFFERS(X,Y) ((X->b_data+X->b_size) == Y->b_data)
#endif
diff -urN linux-2.4.19-rc3/drivers/scsi/scsi_lib.c linux-2.4.19-s390/drivers/scsi/scsi_lib.c
--- linux-2.4.19-rc3/drivers/scsi/scsi_lib.c Tue Jul 30 09:02:29 2002
+++ linux-2.4.19-s390/drivers/scsi/scsi_lib.c Tue Jul 30 09:02:55 2002
@@ -262,6 +262,15 @@
* the bad sector.
*/
SCpnt->request.special = (void *) SCpnt;
+ /*
+ * We need to recount the number of
+ * scatter-gather segments here - the
+ * normal case code assumes this to be
+ * correct, as it would be a performance
+ * loss to always recount. Handling
+ * errors is always unusual, of course.
+ */
+ recount_segments(SCpnt);
list_add(&SCpnt->request.queue, &q->queue_head);
}
@@ -969,15 +978,6 @@
*/
if( req->special != NULL ) {
SCpnt = (Scsi_Cmnd *) req->special;
- /*
- * We need to recount the number of
- * scatter-gather segments here - the
- * normal case code assumes this to be
- * correct, as it would be a performance
- * lose to always recount. Handling
- * errors is always unusual, of course.
- */
- recount_segments(SCpnt);
} else {
SCpnt = scsi_allocate_device(SDpnt, FALSE, FALSE);
}
diff -urN linux-2.4.19-rc3/drivers/scsi/scsi_proc.c linux-2.4.19-s390/drivers/scsi/scsi_proc.c
--- linux-2.4.19-rc3/drivers/scsi/scsi_proc.c Thu Jun 28 02:10:55 2001
+++ linux-2.4.19-s390/drivers/scsi/scsi_proc.c Tue Jul 30 09:01:23 2002
@@ -120,35 +120,34 @@
return(ret);
}
-void build_proc_dir_entries(Scsi_Host_Template * tpnt)
-{
- struct Scsi_Host *hpnt;
- char name[10]; /* see scsi_unregister_host() */
+void build_proc_dir_entry(struct Scsi_Host *shpnt) {
+ char name[10]; /* host_no>=10^9? I don't think so. */
+ struct proc_dir_entry *p;
- tpnt->proc_dir = proc_mkdir(tpnt->proc_name, proc_scsi);
- if (!tpnt->proc_dir) {
- printk(KERN_ERR "Unable to proc_mkdir in scsi.c/build_proc_dir_entries");
- return;
- }
- tpnt->proc_dir->owner = tpnt->module;
+ if(shpnt->hostt->proc_dir) {
+ sprintf(name, "%d", shpnt->host_no);
+ p = create_proc_read_entry(
+ name,
+ S_IFREG | S_IRUGO | S_IWUSR,
+ shpnt->hostt->proc_dir,
+ proc_scsi_read,
+ (void *) shpnt
+ );
+ if (!p)
+ panic("Not enough memory to register SCSI HBA in /proc/scsi !\n");
+ p->write_proc=proc_scsi_write;
+ p->owner = shpnt->hostt->module;
+ }
+}
- hpnt = scsi_hostlist;
- while (hpnt) {
- if (tpnt == hpnt->hostt) {
- struct proc_dir_entry *p;
- sprintf(name,"%d",hpnt->host_no);
- p = create_proc_read_entry(name,
- S_IFREG | S_IRUGO | S_IWUSR,
- tpnt->proc_dir,
- proc_scsi_read,
- (void *)hpnt);
- if (!p)
- panic("Not enough memory to register SCSI HBA in /proc/scsi !\n");
- p->write_proc=proc_scsi_write;
- p->owner = tpnt->module;
- }
- hpnt = hpnt->next;
+void build_proc_dir(Scsi_Host_Template * tpnt)
+{
+ tpnt->proc_dir = proc_mkdir(tpnt->proc_name, proc_scsi);
+ if (!tpnt->proc_dir) {
+ printk(KERN_ERR "Unable to proc_mkdir in scsi.c/build_proc_dir_entries");
+ return;
}
+ tpnt->proc_dir->owner = tpnt->module;
}
/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/