[patch 3/4] 2.5.31 i2c updates

Albert Cranford (ac9410@attbi.com)
Mon, 12 Aug 2002 09:57:50 -0400


Hello Linus,
Please apply the following four tested patches that update
2.5.31 with these I2C changes:
o Support for SMBus 2.0 PEC Packet Error Checking
o New adapter-i2c-frodo for SA 1110 board
o New adapter-i2c-rpx for embeded MPC8XX
o Replace depreciated cli()&sti() with spin_{un}lock_irq()
o Updated documentation
Thanks,
Albert
--- linux-2.5.26/drivers/i2c/i2c-algo-bit.c.orig 2002-07-05 19:42:28.000000000 -0400
+++ linux/drivers/i2c/i2c-algo-bit.c 2002-07-07 20:41:49.000000000 -0400
@@ -21,7 +21,7 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */

-/* $Id: i2c-algo-bit.c,v 1.34 2001/11/19 18:45:02 mds Exp $ */
+/* $Id: i2c-algo-bit.c,v 1.37 2002/07/08 00:41:49 mds Exp $ */

#include <linux/kernel.h>
#include <linux/module.h>
@@ -143,7 +148,7 @@
/* scl, sda may not be high */
DEBPROTO(printk(" Sr "));
setsda(adap,1);
- setscl(adap,1);
+ sclhi(adap);
udelay(adap->udelay);

sdalo(adap);
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/i2c-algo-ibm_ocp.c 2002-07-03 21:00:38.000000000 -0400
@@ -0,0 +1,966 @@
+/*
+ -------------------------------------------------------------------------
+ i2c-algo-ibm_ocp.c i2c driver algorithms for IBM PPC 405 adapters
+ -------------------------------------------------------------------------
+
+ Ian DaSilva, MontaVista Software, Inc.
+ idasilva@mvista.com or source@mvista.com
+
+ Copyright 2000 MontaVista Software Inc.
+
+ Changes made to support the IIC peripheral on the IBM PPC 405
+
+
+ ---------------------------------------------------------------------------
+ This file was highly leveraged from i2c-algo-pcf.c, which was created
+ by Simon G. Vogl and Hans Berglund:
+
+
+ Copyright (C) 1995-1997 Simon G. Vogl
+ 1998-2000 Hans Berglund
+
+ With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
+ <mbailey@littlefeet-inc.com>
+
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ ---------------------------------------------------------------------------
+
+ History: 01/20/12 - Armin
+ akuster@mvista.com
+ ported up to 2.4.16+
+
+ Version 02/03/25 - Armin
+ converted to ocp format
+ removed commented out or #if 0 code
+ added Gérard Basler's fix to iic_combined_transaction() such that it
+ returns the number of successfully completed transfers .
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#include <linux/i2c.h>
+#include "i2c-algo-ibm_ocp.h"
+//ACC#include <asm/ocp.h>
+
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("GPL");
+#endif
+
+
+/* ----- global defines ----------------------------------------------- */
+#define DEB(x) if (i2c_debug>=1) x
+#define DEB2(x) if (i2c_debug>=2) x
+#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
+#define DEBPROTO(x) if (i2c_debug>=9) x;
+ /* debug the protocol by showing transferred bits */
+#define DEF_TIMEOUT 5
+
+/* debugging - slow down transfer to have a look at the data .. */
+/* I use this with two leds&resistors, each one connected to sda,scl */
+/* respectively. This makes sure that the algorithm works. Some chips */
+/* might not like this, as they have an internal timeout of some mils */
+/*
+#define SLO_IO jif=jiffies;while(jiffies<=jif+i2c_table[minor].veryslow)\
+ if (need_resched) schedule();
+*/
+
+
+/* ----- global variables --------------------------------------------- */
+
+#ifdef SLO_IO
+ int jif;
+#endif
+
+/* module parameters:
+ */
+static int i2c_debug=0;
+static int iic_scan=0; /* have a look at what's hanging 'round */
+
+/* --- setting states on the bus with the right timing: --------------- */
+
+#define iic_outb(adap, reg, val) adap->setiic(adap->data, (int) &(reg), val)
+#define iic_inb(adap, reg) adap->getiic(adap->data, (int) &(reg))
+
+#define IICO_I2C_SDAHIGH 0x0780
+#define IICO_I2C_SDALOW 0x0781
+#define IICO_I2C_SCLHIGH 0x0782
+#define IICO_I2C_SCLLOW 0x0783
+#define IICO_I2C_LINEREAD 0x0784
+
+#define IIC_SINGLE_XFER 0
+#define IIC_COMBINED_XFER 1
+
+#define IIC_ERR_LOST_ARB -2
+#define IIC_ERR_INCOMPLETE_XFR -3
+#define IIC_ERR_NACK -1
+
+/* --- other auxiliary functions -------------------------------------- */
+
+
+//
+// Description: Puts this process to sleep for a period equal to timeout
+//
+static inline void iic_sleep(unsigned long timeout)
+{
+ schedule_timeout( timeout * HZ);
+}
+
+
+//
+// Description: This performs the IBM PPC 405 IIC initialization sequence
+// as described in the PPC405GP data book.
+//
+static int iic_init (struct i2c_algo_iic_data *adap)
+{
+ struct iic_regs *iic;
+ struct iic_ibm *adap_priv_data = adap->data;
+ unsigned short retval;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+ /* Clear master low master address */
+ iic_outb(adap,iic->lmadr, 0);
+
+ /* Clear high master address */
+ iic_outb(adap,iic->hmadr, 0);
+
+ /* Clear low slave address */
+ iic_outb(adap,iic->lsadr, 0);
+
+ /* Clear high slave address */
+ iic_outb(adap,iic->hsadr, 0);
+
+ /* Clear status */
+ iic_outb(adap,iic->sts, 0x0a);
+
+ /* Clear extended status */
+ iic_outb(adap,iic->extsts, 0x8f);
+
+ /* Set clock division */
+ iic_outb(adap,iic->clkdiv, 0x04);
+
+ retval = iic_inb(adap, iic->clkdiv);
+ DEB(printk("iic_init: CLKDIV register = %x\n", retval));
+
+ /* Enable interrupts on Requested Master Transfer Complete */
+ iic_outb(adap,iic->intmsk, 0x01);
+
+ /* Clear transfer count */
+ iic_outb(adap,iic->xfrcnt, 0x0);
+
+ /* Clear extended control and status */
+ iic_outb(adap,iic->xtcntlss, 0xf0);
+
+ /* Set mode control (flush master data buf, enable hold SCL, exit */
+ /* unknown state. */
+ iic_outb(adap,iic->mdcntl, 0x47);
+
+ /* Clear control register */
+ iic_outb(adap,iic->cntl, 0x0);
+
+ DEB2(printk(KERN_DEBUG "iic_init: Initialized IIC on PPC 405\n"));
+ return 0;
+}
+
+
+//
+// Description: After we issue a transaction on the IIC bus, this function
+// is called. It puts this process to sleep until we get an interrupt from
+// from the controller telling us that the transaction we requested in complete.
+//
+static int wait_for_pin(struct i2c_algo_iic_data *adap, int *status)
+{
+
+ int timeout = DEF_TIMEOUT;
+ int retval;
+ struct iic_regs *iic;
+ struct iic_ibm *adap_priv_data = adap->data;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+
+ *status = iic_inb(adap, iic->sts);
+#ifndef STUB_I2C
+
+ while (timeout-- && (*status & 0x01)) {
+ adap->waitforpin(adap->data);
+ *status = iic_inb(adap, iic->sts);
+ }
+#endif
+ if (timeout <= 0) {
+ /* Issue stop signal on the bus, and force an interrupt */
+ retval = iic_inb(adap, iic->cntl);
+ iic_outb(adap, iic->cntl, retval | 0x80);
+ /* Clear status register */
+ iic_outb(adap, iic->sts, 0x0a);
+ /* Exit unknown bus state */
+ retval = iic_inb(adap, iic->mdcntl);
+ iic_outb(adap, iic->mdcntl, (retval | 0x02));
+
+ // Check the status of the controller. Does it still see a
+ // pending transfer, even though we've tried to stop any
+ // ongoing transaction?
+ retval = iic_inb(adap, iic->sts);
+ retval = retval & 0x01;
+ if(retval) {
+ // The iic controller is hosed. It is not responding to any
+ // of our commands. We have already tried to force it into
+ // a known state, but it has not worked. Our only choice now
+ // is a soft reset, which will clear all registers, and force
+ // us to re-initialize the controller.
+ /* Soft reset */
+ iic_outb(adap, iic->xtcntlss, 0x01);
+ udelay(500);
+ iic_init(adap);
+ /* Is the pending transfer bit in the sts reg finally cleared? */
+ retval = iic_inb(adap, iic->sts);
+ retval = retval & 0x01;
+ if(retval) {
+ printk(KERN_CRIT "The IIC Controller is hosed. A processor reset is required\n");
+ }
+ // For some reason, even though the interrupt bit in this
+ // register was set during iic_init, it didn't take. We
+ // need to set it again. Don't ask me why....this is just what
+ // I saw when testing timeouts.
+ iic_outb(adap, iic->intmsk, 0x01);
+ }
+ return(-1);
+ }
+ else
+ return(0);
+}
+
+
+//------------------------------------
+// Utility functions
+//
+
+
+//
+// Description: Look at the status register to see if there was an error
+// in the requested transaction. If there is, look at the extended status
+// register and determine the exact cause.
+//
+int analyze_status(struct i2c_algo_iic_data *adap, int *error_code)
+{
+ int ret;
+ struct iic_regs *iic;
+ struct iic_ibm *adap_priv_data = adap->data;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+
+ ret = iic_inb(adap, iic->sts);
+ if(ret & 0x04) {
+ // Error occurred
+ ret = iic_inb(adap, iic->extsts);
+ if(ret & 0x04) {
+ // Lost arbitration
+ *error_code = IIC_ERR_LOST_ARB;
+ }
+ if(ret & 0x02) {
+ // Incomplete transfer
+ *error_code = IIC_ERR_INCOMPLETE_XFR;
+ }
+ if(ret & 0x01) {
+ // Master transfer aborted by a NACK during the transfer of the
+ // address byte
+ *error_code = IIC_ERR_NACK;
+ }
+ return -1;
+ }
+ return 0;
+}
+
+
+//
+// Description: This function is called by the upper layers to do the
+// grunt work for a master send transaction
+//
+static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
+ int count, int xfer_flag)
+{
+ struct iic_regs *iic;
+ struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+ struct iic_ibm *adap_priv_data = adap->data;
+ int wrcount, status, timeout;
+ int loops, remainder, i, j;
+ int ret, error_code;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+
+ if( count == 0 ) return 0;
+ wrcount = 0;
+ loops = count / 4;
+ remainder = count % 4;
+
+ if((loops > 1) && (remainder == 0)) {
+ for(i=0; i<(loops-1); i++) {
+ //
+ // Write four bytes to master data buffer
+ //
+ for(j=0; j<4; j++) {
+ iic_outb(adap, iic->mdbuf,
+ buf[wrcount++]);
+ }
+ //
+ // Issue command to IICO device to begin transmission
+ //
+ iic_outb(adap, iic->cntl, 0x35);
+ //
+ // Wait for transmission to complete. When it does,
+ //loop to the top of the for statement and write the
+ // next four bytes.
+ //
+ timeout = wait_for_pin(adap, &status);
+ if(timeout < 0) {
+ //
+ // Error handling
+ //
+ //printk(KERN_ERR "Error: write timeout\n");
+ return wrcount;
+ }
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR) {
+ // Return the number of bytes transferred
+ ret = iic_inb(adap, iic->xfrcnt);
+ ret = ret & 0x07;
+ return (wrcount-4+ret);
+ }
+ else return error_code;
+ }
+ }
+ }
+ else if((loops >= 1) && (remainder > 0)){
+ //printk(KERN_DEBUG "iic_sendbytes: (loops >= 1)\n");
+ for(i=0; i<loops; i++) {
+ //
+ // Write four bytes to master data buffer
+ //
+ for(j=0; j<4; j++) {
+ iic_outb(adap, iic->mdbuf,
+ buf[wrcount++]);
+ }
+ //
+ // Issue command to IICO device to begin transmission
+ //
+ iic_outb(adap, iic->cntl, 0x35);
+ //
+ // Wait for transmission to complete. When it does,
+ //loop to the top of the for statement and write the
+ // next four bytes.
+ //
+ timeout = wait_for_pin(adap, &status);
+ if(timeout < 0) {
+ //
+ // Error handling
+ //
+ //printk(KERN_ERR "Error: write timeout\n");
+ return wrcount;
+ }
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR) {
+ // Return the number of bytes transferred
+ ret = iic_inb(adap, iic->xfrcnt);
+ ret = ret & 0x07;
+ return (wrcount-4+ret);
+ }
+ else return error_code;
+ }
+ }
+ }
+
+ //printk(KERN_DEBUG "iic_sendbytes: expedite write\n");
+ if(remainder == 0) remainder = 4;
+ // remainder = remainder - 1;
+ //
+ // Write the remaining bytes (less than or equal to 4)
+ //
+ for(i=0; i<remainder; i++) {
+ iic_outb(adap, iic->mdbuf, buf[wrcount++]);
+ //printk(KERN_DEBUG "iic_sendbytes: data transferred = %x, wrcount = %d\n", buf[wrcount-1], (wrcount-1));
+ }
+ //printk(KERN_DEBUG "iic_sendbytes: Issuing write\n");
+
+ if(xfer_flag == IIC_COMBINED_XFER) {
+ iic_outb(adap, iic->cntl, (0x09 | ((remainder-1) << 4)));
+ }
+ else {
+ iic_outb(adap, iic->cntl, (0x01 | ((remainder-1) << 4)));
+ }
+ DEB2(printk(KERN_DEBUG "iic_sendbytes: Waiting for interrupt\n"));
+ timeout = wait_for_pin(adap, &status);
+ if(timeout < 0) {
+ //
+ // Error handling
+ //
+ //printk(KERN_ERR "Error: write timeout\n");
+ return wrcount;
+ }
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR) {
+ // Return the number of bytes transferred
+ ret = iic_inb(adap, iic->xfrcnt);
+ ret = ret & 0x07;
+ return (wrcount-4+ret);
+ }
+ else return error_code;
+ }
+ DEB2(printk(KERN_DEBUG "iic_sendbytes: Got interrupt\n"));
+ return wrcount;
+}
+
+
+//
+// Description: Called by the upper layers to do the grunt work for
+// a master read transaction.
+//
+static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count, int xfer_type)
+{
+ struct iic_regs *iic;
+ int rdcount=0, i, status, timeout;
+ struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+ struct iic_ibm *adap_priv_data = adap->data;
+ int loops, remainder, j;
+ int ret, error_code;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+ if(count == 0) return 0;
+ loops = count / 4;
+ remainder = count % 4;
+
+ //printk(KERN_DEBUG "iic_readbytes: loops = %d, remainder = %d\n", loops, remainder);
+
+ if((loops > 1) && (remainder == 0)) {
+ //printk(KERN_DEBUG "iic_readbytes: (loops > 1) && (remainder == 0)\n");
+ for(i=0; i<(loops-1); i++) {
+ //
+ // Issue command to begin master read (4 bytes maximum)
+ //
+ //printk(KERN_DEBUG "--->Issued read command\n");
+ iic_outb(adap, iic->cntl, 0x37);
+ //
+ // Wait for transmission to complete. When it does,
+ // loop to the top of the for statement and write the
+ // next four bytes.
+ //
+ //printk(KERN_DEBUG "--->Waiting for interrupt\n");
+ timeout = wait_for_pin(adap, &status);
+ if(timeout < 0) {
+ // Error Handler
+ //printk(KERN_ERR "Error: read timed out\n");
+ return rdcount;
+ }
+ //printk(KERN_DEBUG "--->Got interrupt\n");
+
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR)
+ return rdcount;
+ else
+ return error_code;
+ }
+
+ for(j=0; j<4; j++) {
+ // Wait for data to shuffle to top of data buffer
+ // This value needs to optimized.
+ udelay(1);
+ buf[rdcount] = iic_inb(adap, iic->mdbuf);
+ rdcount++;
+ //printk(KERN_DEBUG "--->Read one byte\n");
+ }
+ }
+ }
+
+ else if((loops >= 1) && (remainder > 0)){
+ //printk(KERN_DEBUG "iic_readbytes: (loops >=1) && (remainder > 0)\n");
+ for(i=0; i<loops; i++) {
+ //
+ // Issue command to begin master read (4 bytes maximum)
+ //
+ //printk(KERN_DEBUG "--->Issued read command\n");
+ iic_outb(adap, iic->cntl, 0x37);
+ //
+ // Wait for transmission to complete. When it does,
+ // loop to the top of the for statement and write the
+ // next four bytes.
+ //
+ //printk(KERN_DEBUG "--->Waiting for interrupt\n");
+ timeout = wait_for_pin(adap, &status);
+ if(timeout < 0) {
+ // Error Handler
+ //printk(KERN_ERR "Error: read timed out\n");
+ return rdcount;
+ }
+ //printk(KERN_DEBUG "--->Got interrupt\n");
+
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR)
+ return rdcount;
+ else
+ return error_code;
+ }
+
+ for(j=0; j<4; j++) {
+ // Wait for data to shuffle to top of data buffer
+ // This value needs to optimized.
+ udelay(1);
+ buf[rdcount] = iic_inb(adap, iic->mdbuf);
+ rdcount++;
+ //printk(KERN_DEBUG "--->Read one byte\n");
+ }
+ }
+ }
+
+ //printk(KERN_DEBUG "iic_readbytes: expedite read\n");
+ if(remainder == 0) remainder = 4;
+ DEB2(printk(KERN_DEBUG "iic_readbytes: writing %x to IICO_CNTL\n", (0x03 | ((remainder-1) << 4))));
+
+ if(xfer_type == IIC_COMBINED_XFER) {
+ iic_outb(adap, iic->cntl, (0x0b | ((remainder-1) << 4)));
+ }
+ else {
+ iic_outb(adap, iic->cntl, (0x03 | ((remainder-1) << 4)));
+ }
+ DEB2(printk(KERN_DEBUG "iic_readbytes: Wait for pin\n"));
+ timeout = wait_for_pin(adap, &status);
+ DEB2(printk(KERN_DEBUG "iic_readbytes: Got the interrupt\n"));
+ if(timeout < 0) {
+ // Error Handler
+ //printk(KERN_ERR "Error: read timed out\n");
+ return rdcount;
+ }
+
+ ret = analyze_status(adap, &error_code);
+ if(ret < 0) {
+ if(error_code == IIC_ERR_INCOMPLETE_XFR)
+ return rdcount;
+ else
+ return error_code;
+ }
+
+ //printk(KERN_DEBUG "iic_readbyte: Begin reading data buffer\n");
+ for(i=0; i<remainder; i++) {
+ buf[rdcount] = iic_inb(adap, iic->mdbuf);
+ // printk(KERN_DEBUG "iic_readbytes: Character read = %x\n", buf[rdcount]);
+ rdcount++;
+ }
+
+ return rdcount;
+}
+
+
+//
+// Description: This function implements combined transactions. Combined
+// transactions consist of combinations of reading and writing blocks of data.
+// Each transfer (i.e. a read or a write) is separated by a repeated start
+// condition.
+//
+static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+ int i;
+ struct i2c_msg *pmsg;
+ int ret;
+
+ DEB2(printk(KERN_DEBUG "Beginning combined transaction\n"));
+ for(i=0; i < num; i++) {
+ pmsg = &msgs[i];
+ if(pmsg->flags & I2C_M_RD) {
+
+ // Last read or write segment needs to be terminated with a stop
+ if(i < num-1) {
+ DEB2(printk(KERN_DEBUG "This one is a read\n"));
+ }
+ else {
+ DEB2(printk(KERN_DEBUG "Doing the last read\n"));
+ }
+ ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, (i < num-1) ? IIC_COMBINED_XFER : IIC_SINGLE_XFER);
+
+ if (ret != pmsg->len) {
+ DEB2(printk("i2c-algo-ppc405.o: fail: "
+ "only read %d bytes.\n",ret));
+ return i;
+ }
+ else {
+ DEB2(printk("i2c-algo-ppc405.o: read %d bytes.\n",ret));
+ }
+ }
+ else if(!(pmsg->flags & I2C_M_RD)) {
+
+ // Last read or write segment needs to be terminated with a stop
+ if(i < num-1) {
+ DEB2(printk(KERN_DEBUG "This one is a write\n"));
+ }
+ else {
+ DEB2(printk(KERN_DEBUG "Doing the last write\n"));
+ }
+ ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, (i < num-1) ? IIC_COMBINED_XFER : IIC_SINGLE_XFER);
+
+ if (ret != pmsg->len) {
+ DEB2(printk("i2c-algo-ppc405.o: fail: "
+ "only wrote %d bytes.\n",ret));
+ return i;
+ }
+ else {
+ DEB2(printk("i2c-algo-ppc405.o: wrote %d bytes.\n",ret));
+ }
+ }
+ }
+
+ return num;
+}
+
+
+//
+// Description: Whenever we initiate a transaction, the first byte clocked
+// onto the bus after the start condition is the address (7 bit) of the
+// device we want to talk to. This function manipulates the address specified
+// so that it makes sense to the hardware when written to the IIC peripheral.
+//
+// Note: 10 bit addresses are not supported in this driver, although they are
+// supported by the hardware. This functionality needs to be implemented.
+//
+static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
+ struct i2c_msg *msg, int retries)
+{
+ struct iic_regs *iic;
+ unsigned short flags = msg->flags;
+ unsigned char addr;
+ struct iic_ibm *adap_priv_data = adap->data;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+//
+// The following segment for 10 bit addresses needs to be ported
+//
+/* Ten bit addresses not supported right now
+ if ( (flags & I2C_M_TEN) ) {
+ // a ten bit address
+ addr = 0xf0 | (( msg->addr >> 7) & 0x03);
+ DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
+ // try extended address code...
+ ret = try_address(adap, addr, retries);
+ if (ret!=1) {
+ printk(KERN_ERR "iic_doAddress: died at extended address code.\n");
+ return -EREMOTEIO;
+ }
+ // the remaining 8 bit address
+ iic_outb(adap,msg->addr & 0x7f);
+ // Status check comes here
+ if (ret != 1) {
+ printk(KERN_ERR "iic_doAddress: died at 2nd address code.\n");
+ return -EREMOTEIO;
+ }
+ if ( flags & I2C_M_RD ) {
+ i2c_repstart(adap);
+ // okay, now switch into reading mode
+ addr |= 0x01;
+ ret = try_address(adap, addr, retries);
+ if (ret!=1) {
+ printk(KERN_ERR "iic_doAddress: died at extended address code.\n");
+ return -EREMOTEIO;
+ }
+ }
+ } else ----------> // normal 7 bit address
+
+Ten bit addresses not supported yet */
+
+ addr = ( msg->addr << 1 );
+ if (flags & I2C_M_RD )
+ addr |= 1;
+ if (flags & I2C_M_REV_DIR_ADDR )
+ addr ^= 1;
+ //
+ // Write to the low slave address
+ //
+ iic_outb(adap, iic->lmadr, addr);
+ //
+ // Write zero to the high slave register since we are
+ // only using 7 bit addresses
+ //
+ iic_outb(adap, iic->hmadr, 0);
+
+ return 0;
+}
+
+
+//
+// Description: Prepares the controller for a transaction (clearing status
+// registers, data buffers, etc), and then calls either iic_readbytes or
+// iic_sendbytes to do the actual transaction.
+//
+static int iic_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct iic_regs *iic;
+ struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+ struct iic_ibm *adap_priv_data = adap->data;
+ struct i2c_msg *pmsg;
+ int i = 0;
+ int ret;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+ pmsg = &msgs[i];
+
+ //
+ // Clear status register
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: iic_xfer: Clearing status register\n"));
+ iic_outb(adap, iic->sts, 0x0a);
+
+ //
+ // Wait for any pending transfers to complete
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: Waiting for any pending transfers to complete\n"));
+ while((ret = iic_inb(adap, iic->sts)) == 0x01) {
+ ;
+ }
+
+ //
+ // Flush master data buf
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: Clearing master data buffer\n"));
+ ret = iic_inb(adap, iic->mdcntl);
+ iic_outb(adap, iic->mdcntl, ret | 0x40);
+
+ //
+ // Load slave address
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: Loading slave address\n"));
+ ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
+
+ //
+ // Check to see if the bus is busy
+ //
+ ret = iic_inb(adap, iic->extsts);
+ // Mask off the irrelevent bits
+ ret = ret & 0x70;
+ // When the bus is free, the BCS bits in the EXTSTS register are 0b100
+ if(ret != 0x40) return IIC_ERR_LOST_ARB;
+
+ //
+ // Combined transaction (read and write)
+ //
+ if(num > 1) {
+ DEB2(printk(KERN_DEBUG "iic_xfer: Call combined transaction\n"));
+ ret = iic_combined_transaction(i2c_adap, msgs, num);
+ }
+ //
+ // Read only
+ //
+ else if((num == 1) && (pmsg->flags & I2C_M_RD)) {
+ //
+ // Tell device to begin reading data from the master data
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: Call adapter's read\n"));
+ ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
+ }
+ //
+ // Write only
+ //
+ else if((num == 1 ) && (!(pmsg->flags & I2C_M_RD))) {
+ //
+ // Write data to master data buffers and tell our device
+ // to begin transmitting
+ //
+ DEB2(printk(KERN_DEBUG "iic_xfer: Call adapter's write\n"));
+ ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
+ }
+
+ return ret;
+}
+
+
+//
+// Description: Implements device specific ioctls. Higher level ioctls can
+// be found in i2c-core.c and are typical of any i2c controller (specifying
+// slave address, timeouts, etc). These ioctls take advantage of any hardware
+// features built into the controller for which this algorithm-adapter set
+// was written. These ioctls allow you to take control of the data and clock
+// lines on the IBM PPC 405 IIC controller and set the either high or low,
+// similar to a GPIO pin.
+//
+static int algo_control(struct i2c_adapter *adapter,
+ unsigned int cmd, unsigned long arg)
+{
+ struct iic_regs *iic;
+ struct i2c_algo_iic_data *adap = adapter->algo_data;
+ struct iic_ibm *adap_priv_data = adap->data;
+ int ret=0;
+ int lines;
+ iic = (struct iic_regs *) adap_priv_data->iic_base;
+
+ lines = iic_inb(adap, iic->directcntl);
+
+ if (cmd == IICO_I2C_SDAHIGH) {
+ lines = lines & 0x01;
+ if( lines ) lines = 0x04;
+ else lines = 0;
+ iic_outb(adap, iic->directcntl,(0x08|lines));
+ }
+ else if (cmd == IICO_I2C_SDALOW) {
+ lines = lines & 0x01;
+ if( lines ) lines = 0x04;
+ else lines = 0;
+ iic_outb(adap, iic->directcntl,(0x00|lines));
+ }
+ else if (cmd == IICO_I2C_SCLHIGH) {
+ lines = lines & 0x02;
+ if( lines ) lines = 0x08;
+ else lines = 0;
+ iic_outb(adap, iic->directcntl,(0x04|lines));
+ }
+ else if (cmd == IICO_I2C_SCLLOW) {
+ lines = lines & 0x02;
+ if( lines ) lines = 0x08;
+ else lines = 0;
+ iic_outb(adap, iic->directcntl,(0x00|lines));
+ }
+ else if (cmd == IICO_I2C_LINEREAD) {
+ ret = lines;
+ }
+ return ret;
+}
+
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static struct i2c_algorithm iic_algo = {
+ "IBM on-chip IIC algorithm",
+ I2C_ALGO_OCP,
+ iic_xfer,
+ NULL,
+ NULL, /* slave_xmit */
+ NULL, /* slave_recv */
+ algo_control, /* ioctl */
+ iic_func, /* functionality */
+};
+
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+
+
+//
+// Description: Register bus structure
+//
+int i2c_iic_add_bus(struct i2c_adapter *adap)
+{
+ struct i2c_algo_iic_data *iic_adap = adap->algo_data;
+
+ DEB2(printk(KERN_DEBUG "i2c-algo-iic.o: hw routines for %s registered.\n",
+ adap->name));
+
+ /* register new adapter to i2c module... */
+
+ adap->id |= iic_algo.id;
+ adap->algo = &iic_algo;
+
+ adap->timeout = 100; /* default values, should */
+ adap->retries = 3; /* be replaced by defines */
+
+#ifdef MODULE
+ MOD_INC_USE_COUNT;
+#endif
+
+ iic_init(iic_adap);
+ i2c_add_adapter(adap);
+
+ /* scan bus */
+ /* By default scanning the bus is turned off. */
+ if (iic_scan) {
+ printk(KERN_INFO " i2c-algo-iic.o: scanning bus %s.\n",
+ adap->name);
+ }
+ return 0;
+}
+
+
+//
+// Done
+//
+int i2c_iic_del_bus(struct i2c_adapter *adap)
+{
+ int res;
+ if ((res = i2c_del_adapter(adap)) < 0)
+ return res;
+ DEB2(printk(KERN_DEBUG "i2c-algo-iic.o: adapter unregistered: %s\n",adap->name));
+
+#ifdef MODULE
+ MOD_DEC_USE_COUNT;
+#endif
+ return 0;
+}
+
+
+//
+// Done
+//
+int __init i2c_algo_iic_init (void)
+{
+ printk(KERN_INFO "IBM On-chip iic (i2c) algorithm module 2002.27.03\n");
+ return 0;
+}
+
+
+void i2c_algo_iic_exit(void)
+{
+ return;
+}
+
+
+EXPORT_SYMBOL(i2c_iic_add_bus);
+EXPORT_SYMBOL(i2c_iic_del_bus);
+
+//
+// The MODULE_* macros resolve to nothing if MODULES is not defined
+// when this file is compiled.
+//
+MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
+MODULE_DESCRIPTION("PPC 405 iic algorithm");
+
+MODULE_PARM(iic_test, "i");
+MODULE_PARM(iic_scan, "i");
+MODULE_PARM(i2c_debug,"i");
+
+MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
+MODULE_PARM_DESC(iic_scan, "Scan for active chips on the bus");
+MODULE_PARM_DESC(i2c_debug,
+ "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
+
+
+module_init(i2c_algo_iic_init);
+module_exit(i2c_algo_iic_exit);
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/i2c-algo-ibm_ocp.h 2002-07-03 21:00:38.000000000 -0400
@@ -0,0 +1,55 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-ibm_ocp.h i2c driver algorithms for IBM PPC 405 IIC adapters */
+/* ------------------------------------------------------------------------- */
+/* Copyright (C) 1995-97 Simon G. Vogl
+ 1998-99 Hans Berglund
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+ Frodo Looijaard <frodol@dds.nl> */
+
+/* Modifications by MontaVista Software, August 2000
+ Changes made to support the IIC peripheral on the IBM PPC 405 */
+
+#ifndef I2C_ALGO_IIC_H
+#define I2C_ALGO_IIC_H 1
+
+/* --- Defines for pcf-adapters --------------------------------------- */
+#include <linux/i2c.h>
+
+struct i2c_algo_iic_data {
+ struct iic_regs *data; /* private data for lolevel routines */
+ void (*setiic) (void *data, int ctl, int val);
+ int (*getiic) (void *data, int ctl);
+ int (*getown) (void *data);
+ int (*getclock) (void *data);
+ void (*waitforpin) (void *data);
+
+ /* local settings */
+ int udelay;
+ int mdelay;
+ int timeout;
+};
+
+
+#define I2C_IIC_ADAP_MAX 16
+
+
+int i2c_iic_add_bus(struct i2c_adapter *);
+int i2c_iic_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_IIC_H */
--- linux-2.5.26/drivers/i2c/i2c-elektor.c.orig 2002-07-05 19:42:02.000000000 -0400
+++ linux/drivers/i2c/i2c-elektor.c 2002-08-07 22:39:08.000000000 -0400
@@ -55,12 +55,9 @@
in some functions, called from the algo-pcf module. Sometimes it's
need to be rewriten - but for now just remove this for simpler reading */

-#if (LINUX_VERSION_CODE < 0x020301)
-static struct wait_queue *pcf_wait = NULL;
-#else
static wait_queue_head_t pcf_wait;
-#endif
static int pcf_pending;
+spinlock_t irq_driver_lock = SPIN_LOCK_UNLOCKED;

/* ----- global defines ----------------------------------------------- */
#define DEB(x) if (i2c_debug>=1) x
@@ -121,12 +118,12 @@
int timeout = 2;

if (irq > 0) {
- cli();
+ spin_lock_irq(&irq_driver_lock);
if (pcf_pending == 0) {
interruptible_sleep_on_timeout(&pcf_wait, timeout*HZ );
} else
pcf_pending = 0;
- sti();
+ spin_unlock_irq(&irq_driver_lock);
} else {
udelay(100);
}
@@ -280,9 +277,7 @@
base = DEFAULT_BASE;
}

-#if (LINUX_VERSION_CODE >= 0x020301)
init_waitqueue_head(&pcf_wait);
-#endif
if (pcf_isa_init() == 0) {
if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) {
pcf_isa_exit();
@@ -297,6 +292,7 @@
return 0;
}

+EXPORT_NO_SYMBOLS;

#ifdef MODULE
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/i2c-frodo.c 2002-07-09 08:39:21.000000000 -0400
@@ -0,0 +1,118 @@
+
+/*
+ * linux/drivers/i2c/i2c-frodo.c
+ *
+ * Author: Abraham van der Merwe <abraham@2d3d.co.za>
+ *
+ * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110
+ * Development board (Frodo).
+ *
+ * This source code is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+static void frodo_setsda (void *data,int state)
+{
+ if (state)
+ FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT;
+ else
+ FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT;
+}
+
+static void frodo_setscl (void *data,int state)
+{
+ if (state)
+ FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT;
+ else
+ FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT;
+}
+
+static int frodo_getsda (void *data)
+{
+ return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0);
+}
+
+static int frodo_getscl (void *data)
+{
+ return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0);
+}
+
+static struct i2c_algo_bit_data bit_frodo_data = {
+ setsda: frodo_setsda,
+ setscl: frodo_setscl,
+ getsda: frodo_getsda,
+ getscl: frodo_getscl,
+ udelay: 80,
+ mdelay: 80,
+ timeout: 100
+};
+
+static int frodo_client_register (struct i2c_client *client)
+{
+ return (0);
+}
+
+static int frodo_client_unregister (struct i2c_client *client)
+{
+ return (0);
+}
+
+static void frodo_inc_use (struct i2c_adapter *adapter)
+{
+ MOD_INC_USE_COUNT;
+}
+
+static void frodo_dec_use (struct i2c_adapter *adapter)
+{
+ MOD_DEC_USE_COUNT;
+}
+
+static struct i2c_adapter frodo_ops = {
+ name: "Frodo adapter driver",
+ id: I2C_HW_B_FRODO,
+ algo: NULL,
+ algo_data: &bit_frodo_data,
+ inc_use: frodo_inc_use,
+ dec_use: frodo_dec_use,
+ client_register: frodo_client_register,
+ client_unregister: frodo_client_unregister
+};
+
+static int __init i2c_frodo_init (void)
+{
+ return (i2c_bit_add_bus (&frodo_ops));
+}
+
+EXPORT_NO_SYMBOLS;
+
+static void __exit i2c_frodo_exit (void)
+{
+ i2c_bit_del_bus (&frodo_ops);
+}
+
+MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
+
+#ifdef MODULE_LICENSE
+MODULE_LICENSE ("GPL");
+#endif /* #ifdef MODULE_LICENSE */
+
+EXPORT_NO_SYMBOLS;
+
+module_init (i2c_frodo_init);
+module_exit (i2c_frodo_exit);
+
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux/drivers/i2c/i2c-rpx.c 2002-06-11 22:29:54.000000000 -0400
@@ -0,0 +1,136 @@
+/*
+ * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * moved into proper i2c interface;
+ * Brad Parker (brad@heeltoe.com)
+ *
+ * RPX lite specific parts of the i2c interface
+ * Update: There actually isn't anything RPXLite-specific about this module.
+ * This should work for most any 8xx board. The console messages have been
+ * changed to eliminate RPXLite references.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/parport.h>
+
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-8xx.h>
+
+static void
+rpx_iic_init(struct i2c_algo_8xx_data *data)
+{
+ volatile cpm8xx_t *cp;
+ volatile immap_t *immap;
+
+ cp = cpmp; /* Get pointer to Communication Processor */
+ immap = (immap_t *)IMAP_ADDR; /* and to internal registers */
+
+ data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+
+ /* Check for and use a microcode relocation patch.
+ */
+ if ((data->reloc = data->iip->iic_rpbase))
+ data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
+
+ data->i2c = (i2c8xx_t *)&(immap->im_i2c);
+ data->cp = cp;
+
+ /* Initialize Port B IIC pins.
+ */
+ cp->cp_pbpar |= 0x00000030;
+ cp->cp_pbdir |= 0x00000030;
+ cp->cp_pbodr |= 0x00000030;
+
+ /* Allocate space for two transmit and two receive buffer
+ * descriptors in the DP ram.
+ */
+ data->dp_addr = m8xx_cpm_dpalloc(sizeof(cbd_t) * 4);
+
+ /* ptr to i2c area */
+ data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
+}
+
+static int rpx_install_isr(int irq, void (*func)(void *, void *), void *data)
+{
+ /* install interrupt handler */
+ cpm_install_handler(irq, (void (*)(void *, struct pt_regs *)) func, data);
+
+ return 0;
+}
+
+static int rpx_reg(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int rpx_unreg(struct i2c_client *client)
+{
+ return 0;
+}
+
+static void rpx_inc_use(struct i2c_adapter *adap)
+{
+#ifdef MODULE
+ MOD_INC_USE_COUNT;
+#endif
+}
+
+static void rpx_dec_use(struct i2c_adapter *adap)
+{
+#ifdef MODULE
+ MOD_DEC_USE_COUNT;
+#endif
+}
+
+static struct i2c_algo_8xx_data rpx_data = {
+ setisr: rpx_install_isr
+};
+
+
+static struct i2c_adapter rpx_ops = {
+ "m8xx",
+ I2C_HW_MPC8XX_EPON,
+ NULL,
+ &rpx_data,
+ rpx_inc_use,
+ rpx_dec_use,
+ rpx_reg,
+ rpx_unreg,
+};
+
+int __init i2c_rpx_init(void)
+{
+ printk("i2c-rpx.o: i2c MPC8xx module version %s (%s)\n", I2C_VERSION, I2C_DATE);
+
+ /* reset hardware to sane state */
+ rpx_iic_init(&rpx_data);
+
+ if (i2c_8xx_add_bus(&rpx_ops) < 0) {
+ printk("i2c-rpx: Unable to register with I2C\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+void __exit i2c_rpx_exit(void)
+{
+ i2c_8xx_del_bus(&rpx_ops);
+}
+
+#ifdef MODULE
+MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
+
+module_init(i2c_rpx_init);
+module_exit(i2c_rpx_exit);
+#endif
+

-- 
Albert Cranford Deerfield Beach FL USA
ac9410@bellsouth.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/