Problem with PCMCIA 8139too

gigerstyle@gmx.ch
Thu, 15 Aug 2002 21:55:23 +0200


Hi!

I have successfully installed the PCMCIA CardBus NIC with realtek 8139 chip. I'm using the yenta_socket module and of course the 8139too module.

As test I set up the interface with

ifconfig eth0 192.168.0.5 up

and made a ping to another host.

Seems all to be ok.. no problems there.

When I put my Notebook in sleeping mode and resume it, ifconfig shows still the same network configuration, BUT now I can't ping any other hosts.

A
ifconfig eth0 down
and
ifconfig eth0 192.168.0.5 up

doesn't help.

Ping says only:

PING 192.168.0.1 (192.168.0.1) from 192.168.0.5 : 56(84) bytes of data.

--- 192.168.0.1 ping statistics ---
10 packets transmitted, 0 received, +7 errors, 100% loss, time 9025ms

Have also tried many other things like reloading modules,
shutting down pcmcia before sleeping etc etc....
As last I used the hotplugging scripts...but also without success.

There are no errors in message or something else:-(
After a standby I have to reboot the Notebook for a proper working NIC:-(

Is there any way that it will work? I like standby and hate booting;-)

Other cards have no problems (older realtek, aironet 340) but they aren't cardbus.

/varr/log/messages:

Aug 15 21:18:59 vaio kernel: cs: cb_alloc(bus 6): vendor 0x10ec, device 0x8139
Aug 15 21:18:59 vaio kernel: PCI: Enabling device 06:00.0 (0000 -> 0003)
Aug 15 21:19:00 vaio cardmgr[533]: socket 1: CardBus hotplug device
Aug 15 21:19:00 vaio kernel: 8139too Fast Ethernet driver 0.9.25
Aug 15 21:19:00 vaio kernel: PCI: Setting latency timer of device 06:00.0 to 64
Aug 15 21:19:00 vaio kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xccb99000, 00:30:4f:1d:53:7a, IRQ 9
Aug 15 21:19:00 vaio kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Aug 15 21:19:00 vaio insmod: Using /lib/modules/2.4.19/kernel/drivers/net/mii.o
Aug 15 21:19:00 vaio insmod: Symbol version prefix ''
Aug 15 21:19:00 vaio insmod: Using /lib/modules/2.4.19/kernel/drivers/net/8139too.o
Aug 15 21:19:19 vaio kernel: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.

Loaded modules:

Module Size Used by Not tainted
8139too 14272 1
mii 1056 0 [8139too]
soundcore 3268 0 (autoclean)
ipv6 124928 -1 (autoclean)
ds 6368 2
yenta_socket 8704 2
pcmcia_core 34240 0 [ds yenta_socket]
isa-pnp 27388 0 (unused)
joydev 6816 0 (unused)
evdev 4096 0 (unused)
mousedev 3808 1
hid 18944 0 (unused)
usbmouse 1792 0 (unused)
input 3072 0 [joydev evdev mousedev hid usbmouse]
uhci 23816 0 (unused)
usbcore 54272 1 [hid usbmouse uhci]
nls_iso8859-1 2848 1 (autoclean)
nls_cp437 4384 1 (autoclean)

Ah before I forget: I'm using Kernel Version 2.4.19

More info needed? No problem..

Marc Giger

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/