[PATCH] 686-notsc_A0

john stultz (johnstul@us.ibm.com)
19 Aug 2002 13:34:37 -0700


Marcelo,
In the spirit of "if it doesn't get in, make it smaller and change its
name", here is my 686-notsc patch. It basically just the config option
changes made by my tsc-disable patch, which allow you to build a kernel
for CPUs that have a TSC, but disables the CONFIG_X86_TSC optimization.

thanks
-john

diff -Nru a/Documentation/Configure.help b/Documentation/Configure.help
--- a/Documentation/Configure.help Mon Aug 19 13:23:29 2002
+++ b/Documentation/Configure.help Mon Aug 19 13:23:29 2002
@@ -230,6 +230,20 @@
network and embedded applications. For more information see the
Axis Communication site, <http://developer.axis.com/>.

+Unsynced TSC support
+CONFIG_X86_TSC_DISABLE
+ This option is used for getting Linux to run on a NUMA multi-node
+ boxes, laptops and other systems suffering from unsynced TSCs or
+ TSC drift, which can cause gettimeofday to return non-monotonic values.
+ Choosing this option will disable the CONFIG_X86_TSC optimization,
+ and allows you to then specify "notsc" as a boot option regardless of
+ which processor you have compiled for.
+
+ NOTE: If your system hangs when init should run, you are probably
+ using a i686 compiled glibc which reads the TSC wihout checking for
+ avaliability. Boot without "notsc" and install a i386 compiled glibc
+ to solve the problem.
+
Multiquad support for NUMA systems
CONFIG_MULTIQUAD
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
diff -Nru a/arch/i386/config.in b/arch/i386/config.in
--- a/arch/i386/config.in Mon Aug 19 13:23:29 2002
+++ b/arch/i386/config.in Mon Aug 19 13:23:29 2002
@@ -82,7 +82,7 @@
define_int CONFIG_X86_L1_CACHE_SHIFT 5
define_bool CONFIG_X86_USE_STRING_486 y
define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_PPRO_FENCE y
define_bool CONFIG_X86_F00F_WORKS_OK n
fi
@@ -90,14 +90,14 @@
define_int CONFIG_X86_L1_CACHE_SHIFT 5
define_bool CONFIG_X86_USE_STRING_486 y
define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_GOOD_APIC y
define_bool CONFIG_X86_PPRO_FENCE y
define_bool CONFIG_X86_F00F_WORKS_OK n
fi
if [ "$CONFIG_M686" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_GOOD_APIC y
define_bool CONFIG_X86_PGE y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
@@ -106,7 +106,7 @@
fi
if [ "$CONFIG_MPENTIUMIII" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_GOOD_APIC y
define_bool CONFIG_X86_PGE y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
@@ -114,7 +114,7 @@
fi
if [ "$CONFIG_MPENTIUM4" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 7
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_GOOD_APIC y
define_bool CONFIG_X86_PGE y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
@@ -123,12 +123,12 @@
if [ "$CONFIG_MK6" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
fi
if [ "$CONFIG_MK7" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 6
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_GOOD_APIC y
define_bool CONFIG_X86_USE_3DNOW y
define_bool CONFIG_X86_PGE y
@@ -143,14 +143,14 @@
fi
if [ "$CONFIG_MCYRIXIII" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_ALIGNMENT_16 y
define_bool CONFIG_X86_USE_3DNOW y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
fi
if [ "$CONFIG_MCRUSOE" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_F00F_WORKS_OK y
fi
if [ "$CONFIG_MWINCHIPC6" = "y" ]; then
@@ -163,7 +163,7 @@
if [ "$CONFIG_MWINCHIP2" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
define_bool CONFIG_X86_OOSTORE y
define_bool CONFIG_X86_F00F_WORKS_OK y
@@ -171,7 +171,7 @@
if [ "$CONFIG_MWINCHIP3D" = "y" ]; then
define_int CONFIG_X86_L1_CACHE_SHIFT 5
define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_TSC y
+ define_bool CONFIG_X86_HAS_TSC y
define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
define_bool CONFIG_X86_OOSTORE y
define_bool CONFIG_X86_F00F_WORKS_OK y
@@ -217,6 +217,11 @@
fi
else
bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+fi
+
+bool 'Unsynced TSC support' CONFIG_X86_TSC_DISABLE
+if [ "$CONFIG_X86_TSC_DISABLE" != "y" -a "$CONFIG_X86_HAS_TSC" = "y" ]; then
+ define_bool CONFIG_X86_TSC y
fi

if [ "$CONFIG_SMP" = "y" -a "$CONFIG_X86_CMPXCHG" = "y" ]; then

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/