5.
ksymoops 2.4.3 on i686 2.4.19-xfs. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19-xfs/ (default)
-m /boot/System.map-2.4.19-xfs (default)
Unable to handle kernel paging request at virtual address 6d5f7370
c012a890
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c012a890>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010046
eax: 5f6e6961 ebx: 00000001 ecx: c60f3020 edx: 6d5f736c
esi: c184bea0 edi: 00000286 ebp: 00000002 esp: da5f9f90
ds: 0018 es: 0018 ss: 0018
Process make_tarballs_m (pid: 17471, stackpage=da5f9000)
Stack: 00000000 c60f3000 080c03cc da5f9fbc c01074a3 c60f3000 c01074c3 c184bea0
c60f3000 da5f8000 00000008 bffffa78 c01087a3 00000000 00000000 00000000
00000000 00000000 00000000 00000000 0000002b 0000002b 0000000b 40001db0
Call Trace: [<c01074a3>] [<c01074c3>] [<c01087a3>]
Code: 89 42 04 89 10 8b 46 10 89 48 04 8d 56 10 89 01 89 51 04 89
>>EIP; c012a890 <kmem_cache_free+54/98> <=====
Trace; c01074a2 <sys_execve+2e/60>
Trace; c01074c2 <sys_execve+4e/60>
Trace; c01087a2 <system_call+32/40>
Code; c012a890 <kmem_cache_free+54/98>
00000000 <_EIP>:
Code; c012a890 <kmem_cache_free+54/98> <=====
0: 89 42 04 mov %eax,0x4(%edx) <=====
Code; c012a892 <kmem_cache_free+56/98>
3: 89 10 mov %edx,(%eax)
Code; c012a894 <kmem_cache_free+58/98>
5: 8b 46 10 mov 0x10(%esi),%eax
Code; c012a898 <kmem_cache_free+5c/98>
8: 89 48 04 mov %ecx,0x4(%eax)
Code; c012a89a <kmem_cache_free+5e/98>
b: 8d 56 10 lea 0x10(%esi),%edx
Code; c012a89e <kmem_cache_free+62/98>
e: 89 01 mov %eax,(%ecx)
Code; c012a8a0 <kmem_cache_free+64/98>
10: 89 51 04 mov %edx,0x4(%ecx)
Code; c012a8a2 <kmem_cache_free+66/98>
13: 89 00 mov %eax,(%eax)
Entering kdb (current=0xda5f8000, pid 17471) Oops: Oops
eax = 0x5f6e6961 ebx = 0x00000001 ecx = 0xc60f3020 edx = 0x6d5f736c
esi = 0xc184bea0 edi = 0x00000286 esp = 0xda5f9f90 eip = 0xc012a890
ebp = 0x00000002 xss = 0x00000018 xcs = 0x00000010 eflags = 0x00010046
1 warning issued. Results may not be reliable.
6. -
7.
7.1
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.1.0.2
util-linux 2.10s
mount 2.11b
modutils 2.4.3
e2fsprogs 1.22
PPP 2.4.0
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.59
Console-tools 0.2.3
Sh-utils 2.0
Modules Loaded aic7xxx st scsi_mod
7.2
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1200.054
cache size : 256 KB
7.3
aic7xxx 126044 0 (autoclean)
st 30244 0 (autoclean)
scsi_mod 93962 2 (autoclean) [aic7xxx st]
7.4
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
9000-9fff : PCI Bus #01
9000-90ff : ATI Technologies Inc Rage XL AGP 2X
a000-a00f : VIA Technologies, Inc. Bus Master IDE
a000-a007 : ide0
a008-a00f : ide1
ac00-ac3f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
ac00-ac3f : eepro100
b000-b03f : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
b000-b03f : eepro100
b400-b43f : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
b400-b43f : eepro100
b800-b8ff : Adaptec AIC-7892A U160/m
bc00-bc07 : Triones Technologies, Inc. HPT366 / HPT370
bc00-bc07 : ide2
c000-c003 : Triones Technologies, Inc. HPT366 / HPT370
c002-c002 : ide2
c400-c407 : Triones Technologies, Inc. HPT366 / HPT370
c400-c407 : ide3
c800-c803 : Triones Technologies, Inc. HPT366 / HPT370
c802-c802 : ide3
cc00-ccff : Triones Technologies, Inc. HPT366 / HPT370
cc00-cc07 : ide2
cc08-cc0f : ide3
cc10-ccff : HPT370A
---00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c97ff : Extension ROM
000ca000-000cb7ff : Extension ROM
000cc000-000cd7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-2ffeffff : System RAM
00100000-002711df : Kernel code
002711e0-00343fe3 : Kernel data
2fff0000-2fff2fff : ACPI Non-volatile Storage
2fff3000-2fffffff : ACPI Tables
d0000000-d3ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
d4000000-d6ffffff : PCI Bus #01
d4000000-d4ffffff : ATI Technologies Inc Rage XL AGP 2X
d6000000-d6000fff : ATI Technologies Inc Rage XL AGP 2X
d8000000-d801ffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
d8020000-d803ffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
d8040000-d805ffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
d8060000-d8060fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
d8060000-d8060fff : eepro100
d8061000-d8061fff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
d8061000-d8061fff : eepro100
d8062000-d8062fff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
d8062000-d8062fff : eepro100
d8063000-d8063fff : Adaptec AIC-7892A U160/m
d8063000-d8063fff : aic7xxx
ffff0000-ffffffff : reserved
7.5
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 03)
Subsystem: ABIT Computer Corp.: Unknown device a401
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305 (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d4000000-d6ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at a000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
0c)
Subsystem: Intel Corporation: Unknown device 0040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d8060000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ac00 [size=64]
Region 2: Memory at d8000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0d.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
0c)
Subsystem: Intel Corporation: Unknown device 0040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d8062000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=64]
Region 2: Memory at d8020000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0f.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
0c)
Subsystem: Intel Corporation: Unknown device 0040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d8061000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b400 [size=64]
Region 2: Memory at d8040000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:11.0 SCSI storage controller: Adaptec 7892A (rev 02)
Subsystem: Adaptec: Unknown device e2a0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: I/O ports at b800 [disabled] [size=256]
Region 1: Memory at d8063000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 04)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at cc00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev 27)
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: Ultrium 1-SCSI Rev: E22D
Type: Sequential-Access ANSI SCSI revision: 03
7.7
my .config <URL: http://www.hut.fi/u/tttervo2/config>
If you have anything to ask, please CC.
Tommi Tervo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/