RE: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33

barrie_spence@agilent.com
Mon, 26 Aug 2002 12:00:21 +0200


I've already tried "ideX=ata66" with no effect and they are definitely 80 pin cables (I thought the driver would complain if they weren't).

Barrie

-----Original Message-----
From: Andre Hedrick [mailto:andre@linux-ide.org]
Sent: 24 August 2002 21:23
To: Tomas Szepe
Cc: M?ns Rullg?rd; barrie_spence@agilent.com;
linux-kernel@vger.kernel.org; Alan Cox
Subject: Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33

Not ignore just overloaded with trying to keep up w/ Alan.

On Sat, 24 Aug 2002, Tomas Szepe wrote:

> > > I'm running 2.4.19 with a Promise TX2 Ultra133, but even though the
> > > card BIOS reports UDMA mode 5/6 on the drives, they are reported as
> > > UDMA33 by the kernel.
> > >
> > > Trying hdparm -X69 after boot gives the message "Speed warnings UDMA
> > > 3/4/5 is not functional."
> >
> > I was waiting for this. As I have pointed out several times before,
> > there needs to be added a line
> >
> > hwif->udma_four = 1;
> >
> > at the appropriate place in pdc202xx.c. I don't know where it should
> > be, so I can't write a patch.
>
> Andre Hedrick pretty much ignored both of my posts on the issue.
>
> Anyway, how does ide_init_pdc202xx() look to you (line 1141 in 2.4.20-pre4)?
> There's this "switch (hwif->pci_dev->device)" which would seem to me to be the
> proper place.
>
> T.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/