Re: [PATCH]: linux-2.5.32uc0 (MMU-less support)

Greg Ungerer (gerg@snapgear.com)
Wed, 28 Aug 2002 13:41:32 +1000


Hi All,

Just for fun...

For those that haven't seen linux running on an MMU-less processor
here is the boot trace. Below is what it looks like...

This is running on a Motorola 5272 ColdFire processor (@66MHz),
the board is the M5272C3 board, this one is fitted with 16MB of RAM.
The console is the builtin serial port.

Regards
Greg

------------------------------------------------------------------------
Linux version 2.5.32uc0 (gerg@goober) (gcc version 2.95.3 20010315
(release)(ColdFire patches - 20010318 from
http://fiddes.net/coldfire/)(-msep-data patches)) #4 Wed Aug 28 13:04:21
EST 2002

uClinux/COLDFIRE(m5272)
COLDFIRE port done by Greg Ungerer, gerg@snapgear.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
On node 0 totalpages: 4096
zone(0): 0 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
Kernel command line:
Calibrating delay loop... 43.72 BogoMIPS
Memory available: 14636k/16384k RAM, 0k/0k ROM (680k kernel code, 201k data)
kmem_create: Forcing size word alignment - task_struct
kmem_create: Forcing size word alignment - mm_struct
Security Scaffold v1.0.0 initialized
kmem_create: Forcing size word alignment - filp
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
eth0: FEC ENET Version 0.2, 00:cf:52:72:c3:01
fec: PHY @ 0x1, ID 0x0022561b -- AM79C874
Starting kswapd
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
kmem_create: Forcing size word alignment - file_lock_cache
aio_setup: sizeof(struct page) = 40
kmem_create: Forcing size word alignment - ext2_inode_cache
ColdFire internal UART serial driver version 1.00
ttyS0 at 0x10000100 (irq = 73) is a builtin ColdFire UART
ttyS1 at 0x10000140 (irq = 74) is a builtin ColdFire UART
kmem_create: Forcing size word alignment - blkdev_requests
block: 48 slots per queue, batch=12
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
uclinux[mtd]: RAM probe address=0xfc778 size=0x8d000
Creating 1 MTD partitions on "RAM":
0x00000000-0x0008d000 : "ROMfs"
uclinux[mtd]: set ROMfs to be root filesystem
NET4: Linux TCP/IP 1.0 for NET4.0
kmem_create: Forcing size word alignment - tcp_sock
kmem_create: Forcing size word alignment - udp_sock
kmem_create: Forcing size word alignment - raw4_sock
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 24k freed (0xe6000 - 0xeb000)
Shell invoked to run file: /etc/rc
Command: hostname uClinux
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 netmask 255.0.0.e0 lo
Command: dhcpcd -p t-a eth0 &
h0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
[12]
Command: cat /etc/motd
Welcome to
____ _ _
/ __| ||_|
_ _| | | | _ ____ _ _ _ _
| | | | | | || | _ \| | | |\ \/ /
| |_| | |__| || | | | | |_| |/ \
| ___\____|_||_|_| |_|\____|\_/\_/
| |
|_|

For further information check:
http://www.uclinux.org/

Execution Finished, Exiting

Sash command shell (version 1.1.1)
/>
/> ps
PID PORT STAT SIZE SHARED %CPU COMMAND
1 S 18K 0K 0.3 init
2 R 0K 0K 0.5 ksoftirqd_CPU0
3 S 0K 0K 0.0 keventd
4 S 0K 0K 0.0 kswapd
7 S 0K 0K 0.0 mtdblockd
5 S 0K 0K 0.0 pdflush
6 S 0K 0K 0.0 pdflush
12 S 18K 0K 0.0 dhcpcd -p -a eth0
13 S0 R 21K 0K 0.0 /bin/sh
14 S 11K 0K 0.0 /bin/inetd
15 S 34K 0K 0.0 /bin/boa
/>
/>
/> cat /proc/cpuinfo
CPU: COLDFIRE(m5272)
MMU: none
FPU: none
Clocking: 65.5MHz
BogoMips: 43.72
Calibration: 21862400 loops
/>
/>
/> cat /proc/meminfo
MemTotal: 0 kB
MemFree: 11428 kB
MemShared: 0 kB
Cached: 744 kB
SwapCached: 0 kB
Active: 136 kB
Inactive: 552 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 0 kB
LowFree: 11428 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 128 kB
Writeback: 0 kB
Committed_AS: 0 kB
PageTables: 0 kB
ReverseMaps: 0
/>

------------------------------------------------------------------------
Greg Ungerer -- Chief Software Wizard EMAIL: gerg@snapgear.com
SnapGear Pty Ltd PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: www.SnapGear.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/