diff -urpN linux-2.5.41/kernel/trace.c linux-2.5.41-ltt/kernel/trace.c
--- linux-2.5.41/kernel/trace.c Wed Dec 31 19:00:00 1969
+++ linux-2.5.41-ltt/kernel/trace.c Wed Oct 9 22:32:16 2002
@@ -0,0 +1,3123 @@
+/*
+ * linux/drivers/trace/tracer.c
+ *
+ * (C) Copyright, 1999, 2000, 2001, 2002 - Karim Yaghmour (karim@opersys.com)
+ *
+ * Contains the code for the kernel tracer.
+ *
+ * Author:
+ * Karim Yaghmour (karim@opersys.com)
+ *
+ * Changelog:
+ * 01/10/02, Coding style change to fit with kernel coding style.
+ * 16/02/02, Added Tom Zanussi's implementation of K42's lockless logging.
+ * K42 tracing guru Robert Wisniewski participated in the
+ * discussions surrounding this implementation. A big thanks to
+ * the IBM folks.
+ * 03/12/01, Added user event support.
+ * 05/01/01, Modified PPC bit manipulation functions for x86 compatibility.
+ * (andy_lowe@mvista.com)
+ * 15/11/00, Finally fixed memory allocation and remapping method. Now using
+ * BTTV-driver-inspired code.
+ * 13/03/00, Modified tracer so that the daemon mmaps the tracer's buffers
+ * in it's address space rather than use "read".
+ * 26/01/00, Added support for standardized buffer sizes and extensibility
+ * of events.
+ * 01/10/99, Modified tracer in order to used double-buffering.
+ * 28/09/99, Adding tracer configuration support.
+ * 09/09/99, Chaging the format of an event record in order to reduce the
+ * size of the traces.
+ * 04/03/99, Initial typing.
+ *
+ * Note:
+ * The sizes of the variables used to store the details of an event are
+ * planned for a system who gets at least one clock tick every 10
+ * milli-seconds. There has to be at least one event every 2^32-1
+ * microseconds, otherwise the size of the variable holding the time doesn't
+ * work anymore.
+ */
+
+#include <linux/init.h> /* For __init */
+#include <linux/trace.h> /* Tracing definitions */
+#include <linux/errno.h> /* Miscellaneous error codes */
+#include <linux/stddef.h> /* NULL */
+#include <linux/slab.h> /* kmalloc() */
+#include <linux/module.h> /* EXPORT_SYMBOL */
+#include <linux/sched.h> /* pid_t */
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/wrapper.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/current.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+#include <asm/pgtable.h>
+#include <asm/trace.h>
+
+/* Global variables */
+/* Driver */
+static int major_number; /* Major number of the tracer */
+static int open_count; /* Number of times device is open */
+/* Locking */
+static int trace_lock; /* Tracer lock used to lock primary buffer */
+static spinlock_t trace_spin_lock; /* Spinlock in order to lock kernel */
+static atomic_t pending_write_count; /* Number of event writes in progress */
+/* Daemon */
+static struct task_struct* daemon_task_struct; /* Task structure of the tracer daemon */
+/* Tracer configuration */
+static int tracer_started; /* Is the tracer started */
+static int tracer_stopping; /* Is the tracer stopping */
+static trace_event_mask traced_events; /* Bit-field of events being traced */
+static trace_event_mask log_event_details_mask; /* Log the details of the events mask */
+static int log_cpuid; /* Log the CPUID associated with each event */
+static int use_syscall_eip_bounds; /* Use adress bounds to fetch the EIP where call is made */
+static int lower_eip_bound_set; /* The lower bound EIP has been set */
+static int upper_eip_bound_set; /* The upper bound EIP has been set */
+static void* lower_eip_bound; /* The lower bound EIP */
+static void* upper_eip_bound; /* The upper bound EIP */
+static int tracing_pid; /* Tracing only the events for one pid */
+static int tracing_pgrp; /* Tracing only the events for one process group */
+static int tracing_gid; /* Tracing only the events for one gid */
+static int tracing_uid; /* Tracing only the events for one uid */
+static pid_t traced_pid; /* PID being traced */
+static pid_t traced_pgrp; /* Process group being traced */
+static gid_t traced_gid; /* GID being traced */
+static uid_t traced_uid; /* UID being traced */
+static int syscall_eip_depth_set; /* The call depth at which to fetch EIP has been set */
+static int syscall_eip_depth; /* The call depth at which to fetch the EIP */
+/* Event data buffers */
+static int buf_read_complete; /* Number of buffers completely filled */
+static int size_read_incomplete; /* Quantity of data read from incomplete buffers */
+static u32 buf_size; /* Buffer sizes */
+static u32 cpu_buf_size; /* Total buffer size per CPU */
+static u32 alloc_size; /* Size of buffers allocated */
+static char* trace_buf = NULL; /* Trace buffer */
+static int use_locking; /* Holds command from daemon */
+static u32 buf_no_bits; /* Holds command from daemon */
+static u32 buf_offset_bits; /* Holds command from daemon */
+static int using_tsc; /* Using TSC timestamping? */
+static int using_lockless; /* Using lockless scheme? */
+static int num_cpus; /* Number of CPUs found */
+/* Trace statement behavior */
+unsigned int syscall_entry_trace_active = 0;
+unsigned int syscall_exit_trace_active = 0;
+static int fetch_syscall_eip_use_depth;
+static int fetch_syscall_eip_use_bounds ;
+static int syscall_eip_depth;
+static void* syscall_lower_eip_bound;
+static void* syscall_upper_eip_bound;
+
+/* Timer needed if TSC being used */
+static struct timer_list heartbeat_timer;
+
+/* The global per-buffer control data structure */
+static struct buffer_control buffer_control[NR_CPUS] __cacheline_aligned;
+
+/* The data structure shared between the tracing driver and the trace daemon
+ via ioctl. */
+static struct shared_buffer_control shared_buffer_control;
+
+/* Per-cpu bitmap of buffer switches in progress */
+static u32 buffer_switches_pending;
+
+/* Architecture-specific info the daemon needs to know about */
+static struct ltt_arch_info ltt_arch_info;
+
+/* Large data components allocated at load time */
+static char *user_event_data = NULL; /* The data associated with a user event */
+
+/* Space reserved for TRACE_EV_BUFFER_START */
+static u32 start_reserve = TRACER_FIRST_EVENT_SIZE;
+
+/* Space reserved for TRACE_EV_BUFFER_END event + sizeof lost word, which
+ though the sizeof lost word isn't necessarily contiguous with rest of
+ event (it's always at the end of the buffer) is included here for code
+ clarity. */
+static u32 end_reserve = TRACER_LAST_EVENT_SIZE;
+
+/* The size of the structures used to describe the events */
+static int event_struct_size[TRACE_EV_MAX + 1] =
+{
+ sizeof(trace_start) /* TRACE_START */ ,
+ sizeof(trace_syscall_entry) /* TRACE_SYSCALL_ENTRY */ ,
+ 0 /* TRACE_SYSCALL_EXIT */ ,
+ sizeof(trace_trap_entry) /* TRACE_TRAP_ENTRY */ ,
+ 0 /* TRACE_TRAP_EXIT */ ,
+ sizeof(trace_irq_entry) /* TRACE_IRQ_ENTRY */ ,
+ 0 /* TRACE_IRQ_EXIT */ ,
+ sizeof(trace_schedchange) /* TRACE_SCHEDCHANGE */ ,
+ 0 /* TRACE_KERNEL_TIMER */ ,
+ sizeof(trace_soft_irq) /* TRACE_SOFT_IRQ */ ,
+ sizeof(trace_process) /* TRACE_PROCESS */ ,
+ sizeof(trace_file_system) /* TRACE_FILE_SYSTEM */ ,
+ sizeof(trace_timer) /* TRACE_TIMER */ ,
+ sizeof(trace_memory) /* TRACE_MEMORY */ ,
+ sizeof(trace_socket) /* TRACE_SOCKET */ ,
+ sizeof(trace_ipc) /* TRACE_IPC */ ,
+ sizeof(trace_network) /* TRACE_NETWORK */ ,
+ sizeof(trace_buffer_start) /* TRACE_BUFFER_START */ ,
+ sizeof(trace_buffer_end) /* TRACE_BUFFER_END */ ,
+ sizeof(trace_new_event) /* TRACE_NEW_EVENT */ ,
+ sizeof(trace_custom) /* TRACE_CUSTOM */ ,
+ sizeof(trace_change_mask) /* TRACE_CHANGE_MASK */,
+ 0 /* TRACE_HEARTBEAT */
+};
+
+/* Custom event description */
+struct custom_event_desc {
+ trace_new_event event;
+
+ pid_t owner_pid;
+
+ struct custom_event_desc *next;
+ struct custom_event_desc *prev;
+};
+
+/* Next event ID to be used */
+int next_event_id;
+
+/* Circular list of custom events */
+struct custom_event_desc custom_events_head;
+struct custom_event_desc *custom_events;
+
+/* Circular list lock. This is classic lock that provides for atomic access
+to the circular list. */
+rwlock_t custom_list_lock = RW_LOCK_UNLOCKED;
+
+/* The file operations available for the tracer */
+static struct file_operations tracer_file_ops =
+{
+ owner: THIS_MODULE,
+ ioctl: tracer_ioctl,
+ mmap: tracer_mmap,
+ open: tracer_open,
+ release: tracer_release,
+ fsync: tracer_fsync,
+};
+
+/* This inspired by rtai/shmem */
+#define FIX_SIZE(x) (((x) - 1) & PAGE_MASK) + PAGE_SIZE
+
+/* \begin{Code inspired from BTTV driver} */
+
+/* Here we want the physical address of the memory.
+ * This is used when initializing the contents of the
+ * area and marking the pages as reserved.
+ */
+static inline unsigned long kvirt_to_pa(unsigned long adr)
+{
+ unsigned long kva, ret;
+
+ kva = (unsigned long) page_address(vmalloc_to_page((void *) adr));
+ kva |= adr & (PAGE_SIZE - 1); /* restore the offset */
+ ret = __pa(kva);
+ return ret;
+}
+
+static void *rvmalloc(unsigned long size)
+{
+ void *mem;
+ unsigned long adr;
+
+ mem = vmalloc_32(size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+ adr = (unsigned long) mem;
+ while (size > 0) {
+ mem_map_reserve(vmalloc_to_page((void *) adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+ unsigned long adr;
+
+ if (!mem)
+ return;
+
+ adr = (unsigned long) mem;
+ while ((long) size > 0) {
+ mem_map_unreserve(vmalloc_to_page((void *) adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ vfree(mem);
+}
+
+static int tracer_mmap_region(struct vm_area_struct *vma,
+ const char *adr,
+ const char *start_pos,
+ unsigned long size)
+{
+ unsigned long start = (unsigned long) adr;
+ unsigned long page, pos;
+
+ pos = (unsigned long) start_pos;
+ while (size > 0) {
+ page = kvirt_to_pa(pos);
+ if (remap_page_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ return 0;
+}
+/* \end{Code inspired from BTTV driver} */
+
+/**
+ * tracer_write_to_buffer: - Write data to destination buffer
+ *
+ * Writes data to the destination buffer and updates the begining the
+ * buffer write position.
+ */
+#define tracer_write_to_buffer(DEST, SRC, SIZE) \
+do\
+{\
+ memcpy(DEST, SRC, SIZE);\
+ DEST += SIZE;\
+} while(0);
+
+/*** Lockless scheme functions ***/
+
+/* These inline atomic functions wrap the linux versions in order to
+ implement the interface we want as well as to ensure memory barriers. */
+
+/**
+ * compare_and_store_volatile: - Self-explicit
+ * @ptr: ptr to the word that will receive the new value
+ * @oval: the value we think is currently in *ptr
+ * @nval: the value *ptr will get if we were right
+ *
+ * If *ptr is still what we think it is, atomically assign nval to it and
+ * return a boolean indicating TRUE if the new value was stored, FALSE
+ * otherwise.
+ *
+ * Pseudocode for this operation:
+ *
+ * if(*ptr == oval) {
+ * *ptr = nval;
+ * return TRUE;
+ * } else {
+ * return FALSE;
+ * }
+ */
+inline int compare_and_store_volatile(volatile u32 *ptr,
+ u32 oval,
+ u32 nval)
+{
+ u32 prev;
+
+ barrier();
+ prev = cmpxchg(ptr, oval, nval);
+ barrier();
+
+ return (prev == oval);
+}
+
+/**
+ * atomic_set_volatile: - Atomically set the value in ptr to nval.
+ * @ptr: ptr to the word that will receive the new value
+ * @nval: the new value
+ *
+ * Uses memory barriers to set *ptr to nval.
+ */
+inline void atomic_set_volatile(atomic_t *ptr,
+ u32 nval)
+{
+ barrier();
+ atomic_set(ptr, (int)nval);
+ barrier();
+}
+
+/**
+ * atomic_add_volatile: - Atomically add val to the value at ptr.
+ * @ptr: ptr to the word that will receive the addition
+ * @val: the value to add to *ptr
+ *
+ * Uses memory barriers to add val to *ptr.
+ */
+inline void atomic_add_volatile(atomic_t *ptr, u32 val)
+{
+ barrier();
+ atomic_add((int)val, ptr);
+ barrier();
+}
+
+/**
+ * atomic_sub_volatile: - Atomically substract val from the value at ptr.
+ * @ptr: ptr to the word that will receive the subtraction
+ * @val: the value to subtract from *ptr
+ *
+ * Uses memory barriers to substract val from *ptr.
+ */
+inline void atomic_sub_volatile(atomic_t *ptr, s32 val)
+{
+ barrier();
+ atomic_sub((int)val, ptr);
+ barrier();
+}
+
+/**
+ * trace_commit: - Atomically commit a reserved slot in the buffer.
+ * @index: index into the trace buffer
+ * @len: the value to add to fill_count of the buffer contained in index
+ * @cpu: the CPU id associated with the event
+ *
+ * Atomically add len to the fill_count of the buffer specified by the
+ * buffer number contained in index.
+ */
+static inline void trace_commit(u32 index, u32 len, u8 cpu)
+{
+ u32 bufno = TRACE_BUFFER_NUMBER_GET(index, offset_bits(cpu));
+ atomic_add_volatile(&fill_count(cpu, bufno), len);
+}
+
+/**
+ * write_start_buffer_event: - Write start-buffer event to buffer start.
+ * @buf_index: index into the trace buffer
+ * @start_time: the time of the start-buffer event
+ * @start_tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Writes start-buffer event at the start of the buffer specified by the
+ * buffer number contained in buf_index.
+ */
+static inline void write_start_buffer_event(u32 buf_index,
+ struct timeval start_time,
+ trace_time_delta start_tsc,
+ u8 cpu_id)
+{
+ trace_buffer_start start_buffer_event; /* Start of new buffer event */
+ u8 event_id; /* Event ID of last event */
+ uint16_t data_size; /* Size of tracing data */
+ trace_time_delta time_delta; /* Time between now and prev event */
+ char* current_write_pos; /* Current position for writing */
+
+ /* Clear the offset bits of index to get the beginning of buffer */
+ current_write_pos = trace_buffer(cpu_id)
+ + TRACE_BUFFER_OFFSET_CLEAR(buf_index, offset_mask(cpu_id));
+
+ /* Increment buffer ID */
+ (buffer_id(cpu_id))++;
+
+ /* Write the start of buffer event */
+ start_buffer_event.id = buffer_id(cpu_id);
+ start_buffer_event.time = start_time;
+ start_buffer_event.tsc = start_tsc;
+
+ /* Write event type to tracing buffer */
+ event_id = TRACE_EV_BUFFER_START;
+ tracer_write_to_buffer(current_write_pos,
+ &event_id,
+ sizeof(event_id));
+
+ /* Write event time delta/TSC to tracing buffer */
+ switch_time_delta(start_tsc);
+ tracer_write_to_buffer(current_write_pos,
+ &time_delta,
+ sizeof(time_delta));
+
+ /* Write event structure */
+ tracer_write_to_buffer(current_write_pos,
+ &start_buffer_event,
+ sizeof(start_buffer_event));
+
+ /* Compute the data size */
+ data_size = sizeof(event_id)
+ + sizeof(time_delta)
+ + sizeof(start_buffer_event)
+ + sizeof(data_size);
+
+ /* Write the length of the event description */
+ tracer_write_to_buffer(current_write_pos,
+ &data_size,
+ sizeof(data_size));
+}
+
+/**
+ * write_end_buffer_event: - Write end-buffer event to end of buffer.
+ * @buf_index: index into the trace buffer
+ * @end_time: the time of the end-buffer event
+ * @end_tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Writes end-buffer event at the end of the buffer specified by the
+ * buffer number contained in buf_index, at the offset also contained in
+ * buf_index.
+ */
+static inline void write_end_buffer_event(u32 buf_index,
+ struct timeval end_time,
+ trace_time_delta end_tsc,
+ u8 cpu_id)
+{
+ trace_buffer_end end_buffer_event; /* End of buffer event */
+ u8 event_id; /* Event ID of last event */
+ trace_time_delta time_delta; /* Time between now and prev event */
+ char* current_write_pos; /* Current position for writing */
+ uint16_t data_size; /* Size of tracing data */
+
+ current_write_pos = trace_buffer(cpu_id) + buf_index;
+
+ /* Write the end of buffer event */
+ end_buffer_event.time = end_time;
+ end_buffer_event.tsc = end_tsc;
+
+ /* Write the CPUID to the tracing buffer, if required */
+ if (log_cpuid == TRUE) {
+ tracer_write_to_buffer(current_write_pos,
+ &cpu_id,
+ sizeof(cpu_id));
+ }
+ /* Write event type to tracing buffer */
+ event_id = TRACE_EV_BUFFER_END;
+ tracer_write_to_buffer(current_write_pos,
+ &event_id,
+ sizeof(event_id));
+
+ /* Write event time delta/TSC to tracing buffer */
+ switch_time_delta(end_tsc);
+ tracer_write_to_buffer(current_write_pos,
+ &time_delta,
+ sizeof(time_delta));
+
+ /* Write event structure */
+ tracer_write_to_buffer(current_write_pos,
+ &end_buffer_event,
+ sizeof(end_buffer_event));
+
+ /* Compute the data size */
+ data_size = sizeof(event_id)
+ + sizeof(time_delta)
+ + sizeof(end_buffer_event)
+ + sizeof(data_size);
+
+ /* Write the length of the event description */
+ tracer_write_to_buffer(current_write_pos,
+ &data_size,
+ sizeof(data_size));
+}
+
+/**
+ * write_lost_size: - Write lost size to end of buffer contained in index.
+ * @buf_index: index into the trace buffer
+ * @size_lost: number of bytes lost at the end of buffer
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Writes the value contained in size_lost as the last word in the
+ * the buffer specified by the buffer number contained in buf_index. The
+ * 'lost size' is the number of bytes that are left unused by the tracing
+ * scheme at the end of a buffer for a variety of reasons.
+ */
+static inline void write_lost_size(u32 buf_index, u32 size_lost, u8 cpu_id)
+{
+ char* write_buffer_end; /* End of buffer */
+
+ /* Get end of buffer by clearing offset and adding buffer size */
+ write_buffer_end = trace_buffer(cpu_id)
+ + TRACE_BUFFER_OFFSET_CLEAR(buf_index, offset_mask(cpu_id))
+ + TRACE_BUFFER_SIZE(offset_bits(cpu_id));
+
+ /* Write size lost at the end of the buffer */
+ *((u32 *) (write_buffer_end - sizeof(size_lost))) = size_lost;
+}
+
+/**
+ * finalize_buffer: - Utility function consolidating end-of-buffer tasks.
+ * @end_index: index into trace buffer to write the end-buffer event at
+ * @size_lost: number of unused bytes at the end of the buffer
+ * @time_stamp: the time of the end-buffer event
+ * @tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * This function must be called from within a lock, because it increments
+ * buffers_produced.
+ */
+static inline void finalize_buffer(u32 end_index,
+ u32 size_lost,
+ struct timeval *time_stamp,
+ trace_time_delta *tsc,
+ u8 cpu_id)
+{
+ /* Write end buffer event as last event in old buffer. */
+ write_end_buffer_event(end_index, *time_stamp, *tsc, cpu_id);
+
+ /* In any buffer switch, we need to write out the lost size,
+ which can be 0. */
+ write_lost_size(end_index, size_lost, cpu_id);
+
+ /* Add the size lost and end event size to fill_count so that
+ the old buffer won't be seen as incomplete. */
+ trace_commit(end_index, size_lost, cpu_id);
+
+ /* Every finalized buffer means a produced buffer */
+ (buffers_produced(cpu_id))++;
+}
+
+/**
+ * finalize_lockless_trace: - finalize last buffer at end of trace
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Called when tracing is stopped, to finish processing last buffer.
+ */
+static inline void finalize_lockless_trace(u8 cpu_id)
+{
+ u32 events_end_index; /* Index of end of last event */
+ u32 size_lost; /* Bytes after end of last event */
+ unsigned long int flags; /* CPU flags for lock */
+ struct timeval time; /* The buffer-end time */
+ trace_time_delta tsc; /* The buffer-end TSC */
+
+ /* Find index of end of last event */
+ events_end_index = TRACE_BUFFER_OFFSET_GET(index(cpu_id),
+ offset_mask(cpu_id));
+
+ /* Size lost in buffer is the unused space after end of last event
+ and end of buffer. */
+ size_lost = TRACE_BUFFER_SIZE(offset_bits(cpu_id)) - events_end_index;
+
+ /* Lock the kernel */
+ spin_lock_irqsave(&trace_spin_lock, flags);
+
+ /* Get the time and TSC of the end-buffer event */
+ get_timestamp(&time, &tsc);
+
+ /* Write end event etc. and increment buffers_produced. The
+ time used here is what the locking version uses as well. */
+ finalize_buffer(index(cpu_id) & index_mask(cpu_id), size_lost,
+ &time, &tsc, cpu_id);
+
+ buffer_switches_pending |= (1UL << cpu_id);
+
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+}
+
+/**
+ * discard_check: - Determine whether an event should be discarded.
+ * @old_index: index into trace buffer where check for space should begin
+ * @event_len: the length of the event to check
+ * @time_stamp: the time of the end-buffer event
+ * @tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Checks whether an event of size event_len will fit into the available
+ * buffer space as indicated by the value in old_index. A side effect
+ * of this function is that if the length would fill or overflow the
+ * last available buffer, that buffer will be finalized and all
+ * subsequent events will be automatically discarded until a buffer is
+ * later freed.
+ *
+ * The return value contains the result flags and is an ORed combination
+ * of the following:
+ *
+ * LTT_EVENT_DISCARD_NONE - event should not be discarded
+ * LTT_BUFFER_SWITCH - buffer switch occurred
+ * LTT_EVENT_DISCARD - event should be discarded (all buffers are full)
+ * LTT_EVENT_TOO_LONG - event won't fit into even an empty buffer
+ */
+static inline int discard_check(u32 old_index,
+ u32 event_len,
+ struct timeval *time_stamp,
+ trace_time_delta *tsc,
+ u8 cpu_id)
+{
+ u32 buffers_ready;
+ u32 offset_mask = offset_mask(cpu_id);
+ u8 offset_bits = offset_bits(cpu_id);
+ u32 index_mask = index_mask(cpu_id);
+ u32 size_lost;
+ unsigned long int flags; /* CPU flags for lock */
+
+ /* Check whether the event is larger than a buffer */
+ if(event_len >= TRACE_BUFFER_SIZE(offset_bits))
+ return LTT_EVENT_DISCARD | LTT_EVENT_TOO_LONG;
+
+ /* Lock the kernel */
+ spin_lock_irqsave(&trace_spin_lock, flags);
+
+ /* We're already overrun, nothing left to do */
+ if(buffers_full(cpu_id) == TRUE) {
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+ return LTT_EVENT_DISCARD;
+ }
+
+ buffers_ready = buffers_produced(cpu_id) - buffers_consumed(cpu_id);
+
+ /* If this happens, we've been pushed to the edge of the last
+ available buffer which means we need to finalize it and increment
+ buffers_produced. However, we don't want to allow
+ sBufferControl.index to be actually pushed to full or beyond,
+ otherwise we'd just be wrapping around and allowing subsequent
+ events to overwrite good buffers. It is true that there may not
+ be enough space for this event, but there could be space for
+ subsequent smaller event(s). It doesn't matter if they write
+ themselves, because here we say that anything after the old_index
+ passed in to this function is lost, even if other events have or
+ will reserve space in this last buffer. Nor can any other event
+ reserve space in buffers following this one, until at least one
+ buffer is consumed by the daemon. */
+ if(buffers_ready == n_buffers(cpu_id) - 1) {
+ /* We set this flag so we only do this once per overrun */
+ buffers_full(cpu_id) = TRUE;
+
+ /* Get the time of the event */
+ get_timestamp(time_stamp, tsc);
+
+ /* Size lost is everything after old_index */
+ size_lost = TRACE_BUFFER_SIZE(offset_bits)
+ - TRACE_BUFFER_OFFSET_GET(old_index, offset_mask);
+
+ /* Write end event and lost size. This increases buffer_count
+ by the lost size, which is important later when we add the
+ deferred size. */
+ finalize_buffer(old_index & index_mask, size_lost,
+ time_stamp, tsc, cpu_id);
+
+ /* We need to add the lost size to old index, but we can't
+ do it now, or we'd roll index over and allow new events,
+ so we defer it until a buffer is free. Note however that
+ buffer_count does get incremented by lost size, which is
+ important later when start logging again. */
+ last_event_index(cpu_id) = old_index;
+ last_event_timestamp(cpu_id) = *time_stamp;
+ last_event_tsc(cpu_id) = *tsc;
+
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+
+ /* We lose this event */
+ return LTT_BUFFER_SWITCH | LTT_EVENT_DISCARD;
+ }
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+
+ /* Nothing untoward happened */
+ return LTT_EVENT_DISCARD_NONE;
+}
+
+/**
+ * trace_reserve_slow: - The slow reserve path in the lockless scheme.
+ * @old_index: the value of the buffer control index when we were called
+ * @slot_len: the length of the slot to reserve
+ * @index_ptr: variable that will receive the start pos of the reserved slot
+ * @time_stamp: variable that will receive the time the slot was reserved
+ * @tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Called by trace_reserve() if the length of the event being logged would
+ * most likely cause a 'buffer switch'. The value of the variable pointed
+ * to by index_ptr will contain the index actually reserved by this
+ * function. The timestamp reflecting the time the slot was reserved
+ * will be saved in *time_stamp. The return value indicates whether
+ * there actually was a buffer switch (not inevitable in all cases).
+ * If the return value also indicates a discarded event, the values in
+ * *index_ptr and *time_stamp will be indeterminate.
+ *
+ * The return value contains the result flags and is an ORed combination
+ * of the following:
+ *
+ * LTT_BUFFER_SWITCH_NONE - no buffer switch occurred
+ * LTT_EVENT_DISCARD_NONE - event should not be discarded
+ * LTT_BUFFER_SWITCH - buffer switch occurred
+ * LTT_EVENT_DISCARD - event should be discarded (all buffers are full)
+ * LTT_EVENT_TOO_LONG - event won't fit into even an empty buffer
+ */
+static inline int trace_reserve_slow(u32 old_index, /* needed for overruns */
+ u32 slot_len,
+ u32 *index_ptr,
+ struct timeval *time_stamp,
+ trace_time_delta *tsc,
+ u8 cpu_id)
+{
+ u32 new_index, offset, new_buf_no;
+ unsigned long int flags; /* CPU flags for lock */
+ u32 offset_mask = offset_mask(cpu_id);
+ u8 offset_bits = offset_bits(cpu_id);
+ u32 index_mask = index_mask(cpu_id);
+ u32 size_lost = end_reserve; /* size lost always includes end event */
+ int discard_event;
+ int buffer_switched = LTT_BUFFER_SWITCH_NONE;
+
+ /* We don't get here unless the event might cause a buffer switch */
+
+ /* First check whether conditions exist do discard the event */
+ discard_event = discard_check(old_index, slot_len, time_stamp,
+ tsc, cpu_id);
+ if(discard_event != LTT_EVENT_DISCARD_NONE)
+ return discard_event;
+
+ /* If we're here, we still have free buffers to reserve from */
+
+ /* Do this until we reserve a spot for the event */
+ do {
+ /* Yeah, we're re-using a param variable, is that bad form? */
+ old_index = index(cpu_id);
+
+ /* We're here because the event + ending reserve space would
+ overflow or exactly fill old buffer. Calculate new index
+ again. */
+ new_index = old_index + slot_len;
+
+ /* We only care about the offset part of the new index */
+ offset = TRACE_BUFFER_OFFSET_GET(new_index + end_reserve,
+ offset_mask);
+
+ /* If we would actually overflow and not exactly fill the old
+ buffer, we reserve the first slot (after adding a buffer
+ start event) in the new one. */
+ if((offset < slot_len) && (offset > 0)) {
+
+ /* This is an overflow, not an exact fit. The
+ reserved index is just after the space reserved for
+ the start event in the new buffer. */
+ *index_ptr = TRACE_BUFFER_OFFSET_CLEAR(new_index + end_reserve, offset_mask)
+ + start_reserve;
+
+ /* Now the next free space is at the reserved index
+ plus the length of this event. */
+ new_index = *index_ptr + slot_len;
+ } else if (offset < slot_len) {
+ /* We'll exactly fill the old buffer, so our reserved
+ index is still in the old buffer and our new index
+ is in the new one + sStartReserve */
+ *index_ptr = old_index;
+ new_index = TRACE_BUFFER_OFFSET_CLEAR(new_index + end_reserve, offset_mask)
+ + start_reserve;
+ } else
+ /* another event has actually pushed us into a new
+ buffer since we were called. */
+ *index_ptr = old_index;
+
+ /* Get the time of the event */
+ get_timestamp(time_stamp, tsc);
+ } while (!compare_and_store_volatile(&index(cpu_id),
+ old_index, new_index));
+
+ /* Once we're successful in saving a new_index as the authoritative
+ new global buffer control index, finish the buffer switch
+ processing. */
+
+ /* Mask off the high bits outside of our reserved index */
+ *index_ptr &= index_mask;
+
+ /* At this point, our indices are set in stone, so we can safely
+ write our start and end events and lost count to our buffers.
+ The first test here could fail if between the time reserve_slow
+ was called and we got a reserved slot, we slept and someone else
+ did the buffer switch already. */
+ if(offset < slot_len) { /* Event caused a buffer switch. */
+ if(offset > 0) /* We didn't exactly fill the old buffer */
+ /* Set the size lost value in the old buffer. That
+ value is len+sEndReserve-offset-sEndReserve,
+ i.e. sEndReserve cancels itself out. */
+ size_lost += slot_len - offset;
+ else /* We exactly filled the old buffer */
+ /* Since we exactly filled the old buffer, the index
+ we write the end event to is after the space
+ reserved for this event. */
+ old_index += slot_len;
+
+ /* Lock the kernel */
+ spin_lock_irqsave(&trace_spin_lock, flags);
+
+ /* Write end event etc. and increment buffers_produced. */
+ finalize_buffer(old_index & index_mask, size_lost,
+ time_stamp, tsc, cpu_id);
+
+ /* If we're here, we had a normal buffer switch and need to
+ update the start buffer time before writing the event.
+ The start buffer time is the same as the event time for the
+ event reserved, and lTimeDelta of 0 but that also appears
+ to be the case in the locking version as well. */
+ buffer_start_time(cpu_id) = *time_stamp;
+ buffer_start_tsc(cpu_id) = *tsc;
+
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+
+ /* new_index is always valid here, since it's set correctly
+ if offset < len + sEndReserve, and we don't get here
+ unless that's true. The issue would be that if we didn't
+ actually switch buffers, new_index would be too large by
+ sEndReserve bytes. */
+ write_start_buffer_event(new_index & index_mask,
+ *time_stamp, *tsc, cpu_id);
+
+ /* We initialize the new buffer by subtracting
+ TRACE_BUFFER_SIZE rather than directly initializing to
+ sStartReserve in case events have been already been added
+ to the new buffer under us. We subtract space for the start
+ buffer event from buffer size to leave room for the start
+ buffer event we just wrote. */
+ new_buf_no = TRACE_BUFFER_NUMBER_GET(new_index & index_mask,
+ offset_bits);
+ atomic_sub_volatile(&fill_count(cpu_id, new_buf_no),
+ TRACE_BUFFER_SIZE(offset_bits) - start_reserve);
+
+ /* We need to check whether fill_count is less than the
+ sStartReserve. If this test is true, it means that
+ subtracting the buffer size underflowed fill_count i.e.
+ fill_count represents an incomplete buffer. Any any case,
+ we're completely fubared and don't have any choice but to
+ start the new buffer out fresh. */
+ if(atomic_read(&fill_count(cpu_id, new_buf_no)) < start_reserve)
+ atomic_set_volatile(&fill_count(cpu_id, new_buf_no),
+ start_reserve);
+
+ /* If we're here, there must have been a buffer switch */
+ buffer_switched = LTT_BUFFER_SWITCH;
+ }
+
+ return buffer_switched;
+}
+
+/**
+ * trace_reserve: - Reserve a slot in the trace buffer for an event.
+ * @slot_len: the length of the slot to reserve
+ * @index_prt: variable that will receive the start pos of the reserved slot
+ * @time_stamp: variable that will receive the time the slot was reserved
+ * @tsc: the timestamp counter associated with time
+ * @cpu_id: the CPU id associated with the event
+ *
+ * This is the fast path for reserving space in the trace buffer in the
+ * lockless tracing scheme. If a slot was successfully reserved, the
+ * caller can then at its leisure write data to the reserved space (at
+ * least until the space is reclaimed in an out-of-space situation).
+ *
+ * If the requested length would fill or exceed the current buffer, the
+ * slow path, trace_reserve_slow(), will be executed instead.
+ *
+ * The index reflecting the start position of the slot reserved will be
+ * saved in *index_prt, and the timestamp reflecting the time the slot was
+ * reserved will be saved in *time_stamp. If the return value indicates
+ * a discarded event, the values in *index_prt and *time_stamp will be
+ * indeterminate.
+ *
+ * The return value contains the result flags and is an ORed combination
+ * of the following:
+ *
+ * LTT_BUFFER_SWITCH_NONE - no buffer switch occurred
+ * LTT_EVENT_DISCARD_NONE - event should not be discarded
+ * LTT_BUFFER_SWITCH - buffer switch occurred
+ * LTT_EVENT_DISCARD - event should be discarded (all buffers are full)
+ * LTT_EVENT_TOO_LONG - event won't fit into even an empty buffer
+ */
+static inline int trace_reserve(u32 slot_len,
+ u32 *index_ptr,
+ struct timeval *time_stamp,
+ trace_time_delta *tsc,
+ u8 cpu_id)
+{
+ u32 old_index, new_index, offset;
+ u32 offset_mask = offset_mask(cpu_id);
+
+ /* Do this until we reserve a spot for the event */
+ do {
+ old_index = index(cpu_id);
+
+ /* If adding len + sEndReserve to the old index doesn't put us
+ into a new buffer, this is what the new index would be. */
+ new_index = old_index + slot_len;
+ offset = TRACE_BUFFER_OFFSET_GET(new_index + end_reserve,
+ offset_mask);
+
+ /* If adding the length reserved for the end buffer event and
+ lost count to the new index would put us into a new buffer,
+ we need to do a buffer switch. If in between now and the
+ buffer switch another event that does fit comes in, no
+ problem because we check again in the slow version. In
+ either case, there will always be room for the end event
+ in the old buffer. The trick in this test is that adding
+ a length that would carry into the non-offset bits of the
+ index results in the offset portion being smaller than the
+ length that was added. */
+ if(offset < slot_len)
+ /* We would roll over into a new buffer, need to do
+ buffer switch processing. */
+ return trace_reserve_slow(old_index, slot_len,
+ index_ptr, time_stamp, tsc, cpu_id);
+
+ /* Get the timestamp/TSC of the event, whatever appropriate */
+ get_time_or_tsc(time_stamp, tsc);
+ } while (!compare_and_store_volatile(&index(cpu_id),
+ old_index, new_index));
+
+ /* Once we're successful in saving a new_index as the authoritative
+ new global buffer control index, we can return old_index, the
+ successfully reserved index. */
+
+ /* Return the reserved index value */
+ *index_ptr = old_index & index_mask(cpu_id);
+
+ return LTT_BUFFER_SWITCH_NONE; /* No buffer switch occurred */
+}
+
+/**
+ * lockless_write_event: - Locklessly reserves space and writes an event.
+ * @event_id: event id
+ * @event_struct: event details
+ * @data_size: total event size
+ * @cpu_id: CPU ID associated with event
+ * @var_data_beg: ptr to variable-length data for the event
+ * @var_data_len: length of variable-length data for the event
+ *
+ * This is the main event-writing function for the lockless scheme. It
+ * reserves space for an event if possible, writes the event and signals
+ * the daemon if it caused a buffer switch.
+ */
+int lockless_write_event(u8 event_id,
+ void *event_struct,
+ uint16_t data_size,
+ u8 cpu_id,
+ void *var_data_beg,
+ int var_data_len)
+{
+ u32 reserved_index;
+ struct timeval time_stamp;
+ trace_time_delta time_delta; /* Time between now and prev event */
+ struct siginfo daemon_sig_info; /* Signal information */
+ int reserve_ret_code;
+ char* current_write_pos; /* Current position for writing */
+ int return_code = 0;
+ unsigned long int flags; /* CPU flags for lock */
+
+ /* Reserve space for the event. If the space reserved is in a new
+ buffer, note that fact. */
+ reserve_ret_code = trace_reserve((u32)data_size, &reserved_index,
+ &time_stamp, &time_delta, cpu_id);
+
+ /* Exact lost event count isn't important to anyone, so this is OK. */
+ if(reserve_ret_code & LTT_EVENT_DISCARD)
+ (events_lost(cpu_id))++;
+
+ /* We don't write the event, but we still need to signal */
+ if((reserve_ret_code & LTT_BUFFER_SWITCH) &&
+ (reserve_ret_code & LTT_EVENT_DISCARD)) {
+ return_code = -ENOMEM;
+ goto send_buffer_switch_signal;
+ }
+
+ /* no buffer space left, discard event. */
+ if((reserve_ret_code & LTT_EVENT_DISCARD) ||
+ (reserve_ret_code & LTT_EVENT_TOO_LONG))
+ /* return value for trace() */
+ return -ENOMEM;
+
+ /* The position we write to in the trace memory area is simply the
+ beginning of trace memory plus the index we just reserved. */
+ current_write_pos = trace_buffer(cpu_id) + reserved_index;
+
+ /* If not using TSC, calculate delta */
+ recalc_time_delta(&time_stamp, &time_delta, cpu_id);
+
+ /* Write the CPUID to the tracing buffer, if required */
+ if ((log_cpuid == TRUE) && (event_id != TRACE_EV_START)
+ && (event_id != TRACE_EV_BUFFER_START))
+ tracer_write_to_buffer(current_write_pos,
+ &cpu_id,
+ sizeof(cpu_id));
+
+ /* Write event type to tracing buffer */
+ tracer_write_to_buffer(current_write_pos,
+ &event_id,
+ sizeof(event_id));
+
+ /* Write event time delta to tracing buffer */
+ tracer_write_to_buffer(current_write_pos,
+ &time_delta,
+ sizeof(time_delta));
+
+ /* Do we log event details */
+ if (ltt_test_bit(event_id, &log_event_details_mask)) {
+ /* Write event structure */
+ tracer_write_to_buffer(current_write_pos,
+ event_struct,
+ event_struct_size[event_id]);
+
+ /* Write string if any */
+ if (var_data_len)
+ tracer_write_to_buffer(current_write_pos,
+ var_data_beg,
+ var_data_len);
+ }
+ /* Write the length of the event description */
+ tracer_write_to_buffer(current_write_pos,
+ &data_size,
+ sizeof(data_size));
+
+ /* We've written the event - update the fill_count for the buffer. */
+ trace_commit(reserved_index, (u32)data_size, cpu_id);
+
+send_buffer_switch_signal:
+
+ /* Signal the daemon if we switched buffers */
+ if(reserve_ret_code & LTT_BUFFER_SWITCH) {
+ /* Lock the kernel */
+ spin_lock_irqsave(&trace_spin_lock, flags);
+ buffer_switches_pending |= (1UL << cpu_id);
+
+ /* Unlock the kernel */
+ spin_unlock_irqrestore(&trace_spin_lock, flags);
+
+ /* Setup signal information */
+ daemon_sig_info.si_signo = SIGIO;
+ daemon_sig_info.si_errno = 0;
+ daemon_sig_info.si_code = SI_KERNEL;
+
+ /* Signal the tracing daemon */
+ send_sig_info(SIGIO, &daemon_sig_info, daemon_task_struct);
+ }
+
+ return return_code;
+}
+
+/**
+ * continue_trace: - Continue a stopped trace.
+ * @cpu_id: the CPU id associated with the event
+ *
+ * Continue a trace that's been temporarily stopped because all buffers
+ * were full.
+ */
+static inline void continue_trace(u8 cpu_id)
+{
+ int discard_size;
+ u32 last_event_buf_no;
+ u32 last_buffer_lost_size;
+ u32 last_event_offset;
+ u32 new_index;
+ int freed_buf_no;
+
+ /* A buffer's been consumed, and as we've been waiting around at the
+ end of the last one produced, the one after that must now be free */
+ freed_buf_no = buffers_produced(cpu_id) % n_buffers(cpu_id);
+
+ /* Start the new buffer out at the beginning */
+ atomic_set_volatile(&fill_count(cpu_id, freed_buf_no), start_reserve);
+
+ /* In the all-buffers-full case, sBufferControl.index is frozen at the
+ position of the first event that would have caused a buffer switch.
+ However, the fill_count for that buffer is not frozen and reflects
+ not only the lost size calculated at that point, but also any
+ smaller events that managed to write themselves at the end of the
+ last buffer (because there's technically still space at the end,
+ though it and all those contained events will be erased here).
+ Here we try to salvage if possible that last buffer, but to do
+ that, we need to subtract those pesky smaller events that managed
+ to get in. If after all that, another small event manages to
+ sneak in in the time it takes us to do this, well, we concede and
+ the daemon will toss that buffer. It's not the end of the world
+ if that happens, since that buffer actually marked the start of a
+ bunch of lost events which continues until a buffer is freed. */
+
+ /* Get the bufno and offset of the buffer containing the last event
+ logged before we had to stop for a buffer-full condition. */
+ last_event_offset = TRACE_BUFFER_OFFSET_GET(last_event_index(cpu_id),
+ offset_mask(cpu_id));
+ last_event_buf_no = TRACE_BUFFER_NUMBER_GET(last_event_index(cpu_id),
+ offset_bits(cpu_id));
+
+ /* We also need to know the lost size we wrote to that buffer when we
+ stopped */
+ last_buffer_lost_size = TRACE_BUFFER_SIZE(offset_bits(cpu_id))
+ - last_event_offset;
+
+ /* Since the time we stopped, some smaller events probably reserved
+ space and wrote themselves in, the sizes of which would have been
+ reflected in the fill_count. The total size of these events is
+ calculated here. */
+ discard_size = atomic_read(&fill_count(cpu_id, last_event_buf_no))
+ - last_event_offset
+ - last_buffer_lost_size;
+
+ /* If there were events written after we stopped, subtract those from
+ the fill_count. If that doesn't fix things, the buffer either is
+ really incomplete, or another event snuck in, and we'll just stop
+ now and say we did what we could for it. */
+ if(discard_size > 0)
+ atomic_sub_volatile(&fill_count(cpu_id, last_event_buf_no),
+ discard_size);
+
+ /* Since our end buffer event probably got trounced, rewrite it in old
+ buffer. */
+ write_end_buffer_event(last_event_index(cpu_id) & index_mask(cpu_id),
+ last_event_timestamp(cpu_id), last_event_tsc(cpu_id), cpu_id);
+
+ /* We also need to update the buffer start time and write the start
+ event for the next buffer, since we couldn't do it until now */
+ get_timestamp(&buffer_start_time(cpu_id), &buffer_start_tsc(cpu_id));
+
+ /* The current buffer control index is hanging around near the end of
+ the last buffer. So we add the buffer size and clear the offset to
+ get to the beginning of the newly freed buffer. */
+ new_index = index(cpu_id) + TRACE_BUFFER_SIZE(offset_bits(cpu_id));
+ new_index = TRACE_BUFFER_OFFSET_CLEAR(new_index,
+ offset_mask(cpu_id)) + start_reserve;
+ write_start_buffer_event(new_index & index_mask(cpu_id),
+ buffer_start_time(cpu_id), buffer_start_tsc(cpu_id), cpu_id);
+
+ /* Fixing up sBufferControl.index is simpler. Since a buffer has been
+ consumed, there's now at least one buffer free, and we can continue.
+ We start off the next buffer in a fresh state. Since nothing else
+ can be meaningfully updating the buffer control index, we can safely
+ do that here. 'Meaningfully' means that there may be cases of
+ smaller events managing to update the index in the last buffer but
+ they're essentially erased by the lost size of that buffer when
+ sBuffersFull was set. We need to restart the index at the beginning
+ of the next available buffer before turning off sBuffersFull, and
+ avoid an erroneous buffer switch. */
+ index(cpu_id) = new_index;
+
+ /* Now we can continue reserving events */
+ buffers_full(cpu_id) = FALSE;
+}
+
+/**
+ * tracer_set_n_buffers: - Sets the number of buffers.
+ * @no_buffers: number of buffers.
+ *
+ * Sets the number of buffers containing the trace data, valid only for
+ * lockless scheme, must be a power of 2.
+ *
+ * Returns:
+ *
+ * 0, Size setting went OK
+ * -EINVAL, not a power of 2
+ */
+int tracer_set_n_buffers(int no_buffers)
+{
+ if(hweight32(no_buffers) != 1) /* Invalid if # set bits in word != 1 */
+ return -EINVAL;
+
+ /* Find position of one and only set bit */
+ buf_no_bits = ffs(no_buffers) - 1;
+
+ return 0;
+}
+
+/**
+ * write_heartbeat_event: - Timer function generating hearbeat event.
+ * @data: unused
+ *
+ * Called at a frequency calculated to guarantee at least 1 event is
+ * logged before the low word of the TSC wraps. The post-processing
+ * tools depend on this in order to calculate the correct timestamp
+ * in cases where no events occur in that interval e.g. ~10s on a
+ * 400 MHz machine.
+ */
+static void write_heartbeat_event(unsigned long data)
+{
+ unsigned long int flags; /* CPU flags for lock */
+ int i;
+
+ local_irq_save(flags);
+ for(i = 0; i < num_cpus; i++)
+ set_waiting_for_cpu(i, LTT_TRACE_HEARTBEAT);
+ local_irq_restore(flags);
+
+ del_timer(&heartbeat_timer);
+
+ /* subtract a jiffy so we're more sure to get a slot */
+ heartbeat_timer.expires = jiffies + 0xffffffffUL/loops_per_jiffy - 1;
+ add_timer(&heartbeat_timer);
+}
+
+/**
+ * init_heartbeat_time: - Start timer generating hearbeat events.
+ *
+ * In order to detect TSC wraps, at least one event must be written
+ * within the TSC wrap time. This ensures that will happen even if
+ * there aren't any other events occurring.
+ */
+static void init_heartbeat_timer(void)
+{
+ if(using_tsc == TRUE) {
+ if(loops_per_jiffy > 0) {
+ init_timer(&heartbeat_timer);
+ heartbeat_timer.function = write_heartbeat_event;
+
+ /* subtract a jiffy so we're more sure to get a slot */
+ heartbeat_timer.expires = jiffies
+ + 0xffffffffUL/loops_per_jiffy - 1;
+ add_timer(&heartbeat_timer);
+ } else
+ printk(KERN_ALERT "Tracer: Couldn't set up heartbeat timer - continuing without one \n");
+ }
+}
+
+/**
+ * initialize_trace: - Initialize a trace session for a given CPU.
+ * @cpu_id: the CPU id to initialize a trace for
+ *
+ * Write the start-buffer and start-trace events for a CPU.
+ */
+static inline void initialize_trace(u8 cpu_id)
+{
+ trace_start start_event; /* Event marking the begining of the trace */
+ trace_buffer_start start_buffer_event; /* Start of new buffer event */
+
+ /* Get the time of start */
+ get_timestamp(&buffer_start_time(cpu_id), &buffer_start_tsc(cpu_id));
+
+ /* Set the event description */
+ start_buffer_event.id = buffer_id(cpu_id);
+ start_buffer_event.time = buffer_start_time(cpu_id);
+ start_buffer_event.tsc = buffer_start_tsc(cpu_id);
+
+ /* Set the event description */
+ start_event.magic_number = TRACER_MAGIC_NUMBER;
+ start_event.arch_type = TRACE_ARCH_TYPE;
+ start_event.arch_variant = TRACE_ARCH_VARIANT;
+ start_event.system_type = TRACE_SYS_TYPE_VANILLA_LINUX;
+ start_event.major_version = TRACER_VERSION_MAJOR;
+ start_event.minor_version = TRACER_VERSION_MINOR;
+ start_event.buffer_size = buf_size;
+ start_event.event_mask = traced_events;
+ start_event.details_mask = log_event_details_mask;
+ start_event.log_cpuid = log_cpuid;
+ start_event.use_tsc = using_tsc;
+
+ /* Trace the buffer start event using the appropriate method depending
+ on the locking scheme */
+ if(using_lockless == TRUE)
+ write_start_buffer_event(index(cpu_id) & index_mask(cpu_id),
+ buffer_start_time(cpu_id), buffer_start_tsc(cpu_id), cpu_id);
+ else
+ trace(TRACE_EV_BUFFER_START, &start_buffer_event, cpu_id);
+
+ /* Trace the start event */
+ trace(TRACE_EV_START, &start_event, cpu_id);
+}
+
+/**
+ * all_finalized: - Determine whether all traces have been finalized.
+ *
+ * Utility function for figuring out whether or not the traces for all
+ * CPUs have been completed. Returns TRUE if so, FALSE otherwise.
+ */
+static int all_finalized(void)
+{
+ int i;
+
+ for(i = 0; i < num_cpus; i++)
+ if(atomic_read(&waiting_for_cpu(i)) & LTT_FINALIZE_TRACE)
+ return FALSE;
+
+ return TRUE;
+}
+
+/**
+ * do_waiting_tasks: - perform per-CPU tasks needing a particular CPU.
+ * @cpu_id: the CPU the tasks should be executed on
+ *
+ * Certain tasks (e.g. initializing/finalizing/continuing a trace,
+ * logging a heartbeat event) need to be executed on a particular CPU
+ * and in certain cases can't be at the time the need is found to do so.
+ * Each CPU has a set of flags indicating that the next thing that needs
+ * to be done on that CPU is one or more of the tasks indicated by a bit
+ * set in this set of flags. Only one type of task per CPU is ever
+ * pending i.e. queues aren't necessary. This function (re)checks the
+ * flags and performs any of the indicated tasks.
+ */
+static void do_waiting_tasks(u8 cpu_id)
+{
+ unsigned long int flags; /* CPU flags for lock */
+ struct timeval time; /* Event time */
+ trace_time_delta tsc; /* The buffer-end TSC */
+ int tasks;
+
+ local_irq_save(flags);
+ /* Check again in case we've been usurped */
+ tasks = atomic_read(&waiting_for_cpu(cpu_id));
+ if(tasks == 0) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Before we can log any events, we need to write start/start_buffer
+ event for this CPU */
+ if(using_tsc && tracer_started && (tasks & LTT_INITIALIZE_TRACE)) {
+ clear_waiting_for_cpu(cpu_id, LTT_INITIALIZE_TRACE);
+ initialize_trace(cpu_id);
+ }
+
+ if(using_tsc && tracer_started && (tasks & LTT_TRACE_HEARTBEAT)) {
+ clear_waiting_for_cpu(cpu_id, LTT_TRACE_HEARTBEAT);
+ TRACE_HEARTBEAT();
+ }
+
+ if(using_lockless && tracer_started && (tasks & LTT_CONTINUE_TRACE)) {
+ clear_waiting_for_cpu(cpu_id, LTT_CONTINUE_TRACE);
+ continue_trace(cpu_id);
+ }
+
+ /* Before we finish logging, we need to write end_buffer
+ event for this CPU, if we're using TSC timestamping (because
+ we couldn't do all finalizing in TRACER_STOP itself) */
+ if(tracer_stopping && using_tsc && (tasks & LTT_FINALIZE_TRACE)) {
+ /* NB - we need to do this before calling trace to
+ avoid recursion */
+ clear_waiting_for_cpu(cpu_id, LTT_FINALIZE_TRACE);
+ if(using_lockless) {
+ finalize_lockless_trace(cpu_id);
+ } else {
+ buffer_switches_pending |= (1UL << cpu_id);
+
+ /* Get the time of the event */
+ get_timestamp(&time, &tsc);
+ tracer_switch_buffers(time, tsc, cpu_id);
+ }
+ if(all_finalized())
+ tracer_stopping = FALSE;
+ }
+ local_irq_restore(flags);
+}
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/