TIA
Carlo Scarfoglio
This is kernel 2.5.34 boot.msg
Inspecting /boot/System.map
Symbol table has incorrect version number.
Cannot find map file.
No module symbols loaded.
klogd 1.4.1, log source = ksyslog started.
0:58:29 CEST 2002
<4>Video mode to be used for restore is ffff
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
<4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
<4> BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
<4> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>511MB LOWMEM available.
<4>On node 0 totalpages: 131068
<4> DMA zone: 4096 pages
<4> Normal zone: 126972 pages
<4> HighMem zone: 0 pages
<6>ACPI: RSDP (v000 ASUS ) @ 0x000f5e30
<6>ACPI: RSDT (v001 ASUS A7V333 16944.11825) @ 0x1fffc000
<6>ACPI: FADT (v001 ASUS A7V333 16944.11825) @ 0x1fffc0b2
<6>ACPI: BOOT (v001 ASUS A7V333 16944.11825) @ 0x1fffc030
<6>ACPI: MADT (v001 ASUS A7V333 16944.11825) @ 0x1fffc058
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 6:6 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0]
trigger[0x1])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3]
trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Kernel command line: auto BOOT_IMAGE=linux2534 ro root=301
<6>Initializing CPU#0
<4>Detected 1532.808 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 3014.65 BogoMIPS
<4>Memory: 515204k/524272k available (2173k kernel code, 8672k reserved,
755k data, 296k init, 0k highmem)
<6>Security Scaffold v1.0.0 initialized
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Machine check exception polling timer started.
<7>CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
<7>CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
<4>CPU: AMD Athlon(TM) XP 1800+ stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178002
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0002
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 1 1 0 1 0 1 1 71
<7> 0a 001 01 0 0 0 0 0 1 1 79
<7> 0b 001 01 0 0 0 0 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1532.0661 MHz.
<4>..... host bus clock speed is 266.0549 MHz.
<4>cpu: 0, clocks: 266549, slice: 133274
<4>CPU0<T0:266544,T1:133264,D:6,S:133274,C:266549>
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20020829
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14, enabled
at IRQ 9)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>usb.c: registered new driver usbfs
<6>usb.c: registered new driver hub
<7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17)
<7>00:00:05[A] -> 2-17 -> vector 0xa9 -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18)
<7>00:00:05[B] -> 2-18 -> vector 0xb1 -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19)
<7>00:00:06[A] -> 2-19 -> vector 0xb9 -> IRQ 19
<7>Pin 2-17 already programmed
<7>Pin 2-19 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16)
<7>00:00:0c[B] -> 2-16 -> vector 0xc1 -> IRQ 16
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21)
<7>00:00:11[D] -> 2-21 -> vector 0xc9 -> IRQ 21
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<4>PCI: No IRQ known for interrupt pin A of device 00:11.1<6>PCI: Using
ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi'
<6>SBF: Simple Boot Flag extension found and enabled.
<6>SBF: Setting boot flags 0x1
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>BIO: pool of 256 setup, 14Kb (56 bytes/bio)
<4>biovec: init pool 0, 1 entries, 12 bytes
<4>biovec: init pool 1, 4 entries, 48 bytes
<4>biovec: init pool 2, 16 entries, 192 bytes
<4>biovec: init pool 3, 64 entries, 768 bytes
<4>biovec: init pool 4, 128 entries, 1536 bytes
<4>biovec: init pool 5, 256 entries, 3072 bytes
<5>aio_setup: sizeof(struct page) = 40
<6>NTFS driver 2.1.0 [Flags: R/O].
<6>Capability LSM initialized
<6>PCI: Via IRQ fixup for 00:11.2, from 9 to 5
<6>PCI: Via IRQ fixup for 00:11.3, from 9 to 5
<6>Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
<6>parport0: irq 7 detected
<7>parport0: cpp_mux: aa55f00f52ad51(86)
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<7>parport0: cpp_mux: aa55f00f52ad51(86)
<7>parport0: cpp_daisy: aa5500ff(30)
<7>parport0: assign_addrs: aa5500ff(30)
<6>i2c-core.o: i2c core module version 2.6.4 (20020719)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
<6>i2c-proc.o version 2.6.4 (20020719)
<4>pty: 256 Unix98 ptys configured
<6>lp0: using parport0 (polling).
<6>Real Time Clock Driver v1.11
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 439M
<6>agpgart: Detected Via Apollo Pro KT266 chipset
<6>agpgart: AGP aperture is 128M @ 0xe0000000
<6>[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 128MB
<6>[drm] Initialized mga 3.0.2 20010321 on minor 0
<4>block: 256 slots per queue, batch=32
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>8139too Fast Ethernet driver 0.9.26
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xe082f000, 00:10:a7:14:6f:68,
IRQ 17
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>PDC20276: IDE controller on PCI bus 00 dev 30
<4>PDC20276: chipset revision 1
<4>PDC20276: not 100%% native mode: will probe irqs later
<4> ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
<4> ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
<4>VP_IDE: IDE controller on PCI bus 00 dev 89
<4>PCI: No IRQ known for interrupt pin A of device 00:11.1VP_IDE:
chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
<4> ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: IC35L040AVVA07-0, ATA DISK drive
<4>blk: queue c0464884, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: IBM-DHEA-38451, ATA DISK drive
<4>blk: queue c0464c48, I/O limit 4095Mb (mask 0xffffffff)
<4>hde: IBM-DPTA-372050, ATA DISK drive
<4>blk: queue c046500c, I/O limit 4095Mb (mask 0xffffffff)
<4>hdh: IBM-DTLA-307045, ATA DISK drive
<4>blk: queue c046554c, I/O limit 4095Mb (mask 0xffffffff)
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0xd400-0xd407,0xd002 on irq 19
<4>ide3 at 0xb800-0xb807,0xb402 on irq 19
<4>hdh: host protected area => 1
<6>hdh: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63,
UDMA(100)
<6> hdh: hdh1 hdh2
<4>hde: host protected area => 1
<6>hde: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63,
UDMA(66)
<6> hde: hde1 hde2
<6>hdc: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=16383/16/63, UDMA(33)
<6> hdc: hdc1 < >
<4>hda: host protected area => 1
<6>hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63,
UDMA(100)
<6> hda: hda1 hda2 hda3
<6>SCSI subsystem driver Revision: 1.00
<4>ahc_pci:0:13:0: Host Adapter Bios disabled. Using default SCSI
device parameters
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<4> <Adaptec 2902/04/10/15/20/30C SCSI adapter>
<4> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
<4>
<4>(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
<5> Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
<5> Type: CD-ROM ANSI SCSI revision: 02
<5> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
<5> Type: CD-ROM ANSI SCSI revision: 02
<4>(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
<4>Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
<4>sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.12
<4>sr1: scsi3-mmc drive: 2x/6x xa/form2 cdda tray
<6>uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
<6>hcd-pci.c: uhci-hcd @ 00:11.2, VIA Technologies, Inc. USB
<6>hcd-pci.c: irq 21, io base 00009400
<6>hcd.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found at 0
<6>hub.c: 2 ports detected
<6>hcd-pci.c: uhci-hcd @ 00:11.3, VIA Technologies, Inc. USB (#2)
<6>hcd-pci.c: irq 21, io base 00009000
<6>hcd.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found at 0
<6>hub.c: 2 ports detected
<6>usb.c: registered new driver usblp
<6>usblp.c: v0.12: USB Printer Device Class driver
<6>Initializing USB Mass Storage driver...
<6>usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v2.0:USB HID core driver
<7>register interface 'mouse' with class 'input
<6>mice: PS/2 mouse device common for all mice
<7>register interface 'event' with class 'input
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: AT Set 2 Extended keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Advanced Linux Sound Architecture Driver Version 0.9.0rc2 (Wed Jun 19
08:56:25 2002 UTC).
<3>request_module[snd-card-0]: not ready
<3>request_module[snd-card-1]: not ready
<3>request_module[snd-card-2]: not ready
<3>request_module[snd-card-3]: not ready
<3>request_module[snd-card-4]: not ready
<3>request_module[snd-card-5]: not ready
<3>request_module[snd-card-6]: not ready
<3>request_module[snd-card-7]: not ready
<6>ALSA device list:
<6> #0: C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 17
<6> #1: Ensoniq AudioPCI ES1371 at 0xa000, irq 18
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<4>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per
conntrack
<4>ip_tables: (C) 2000-2002 Netfilter core team
<4>arp_tables: (C) 2002 David S. Miller
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<3>request_module[nls_iso8859-1]: not ready
<4>Unable to load NLS charset iso8859-1
<4>found reiserfs format "3.6" with standard journal
<6>hub.c: new USB device 00:11.2-2, assigned address 2
<6>input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse ® with
IntelliEye] on usb-00:11.2-2
<4>Reiserfs journal params: device ide0(3,1), size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
<4>reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>Freeing unused kernel memory: 296k freed
<6>Adding 1052248k swap on /dev/hda2. Priority:42 extents:1
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device ide0(3,3), size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
<4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Kernel 2.5.46 boot.msg
Inspecting /boot/System.map
Symbol table has incorrect version number.
Cannot find map file.
No module symbols loaded.
klogd 1.4.1, log source = ksyslog started.
RQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1532.0661 MHz.
<4>..... host bus clock speed is 266.0549 MHz.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>mtrr: v2.0 (20020519)
<6>Linux Plug and Play Support v0.9 (c) Adam Belay
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=1
<6>PCI: Using configuration type 1
<7>Registering system device cpu0
<7>adding 'CPU 0' to cpu class interfaces
<4>BIO: pool of 256 setup, 15Kb (60 bytes/bio)
<4>biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
<4>biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
<4>biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
<4>biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
<4>biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
<4>biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
<6>ACPI: Subsystem revision 20021101
<4> ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE15
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14, enabled
at IRQ 9)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<4>block request queues:
<4> 128 requests per read queue
<4> 128 requests per write queue
<4> 8 requests per batch
<4> enter congestion at 31
<4> exit congestion at 33
<6>PnPBIOS: Found PnP BIOS installation structure at 0xc00f9c60
<6>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9c90, dseg 0xf0000
<6>pnp: 00:11: ioport range 0x290-0x297 has been reserved
<6>pnp: 00:11: ioport range 0x3f0-0x3f1 has been reserved
<6>pnp: 00:11: ioport range 0xe400-0xe47f has been reserved
<6>pnp: 00:11: ioport range 0xec00-0xec3f has been reserved
<6>PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>drivers/usb/core/usb.c: registered new driver usbfs
<6>drivers/usb/core/usb.c: registered new driver hub
<7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17)
<7>00:00:05[A] -> 2-17 -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18)
<7>00:00:05[B] -> 2-18 -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19)
<7>00:00:06[A] -> 2-19 -> IRQ 19
<7>Pin 2-17 already programmed
<7>Pin 2-19 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16)
<7>00:00:0c[B] -> 2-16 -> IRQ 16
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21)
<7>00:00:11[D] -> 2-21 -> IRQ 21
<7>Pin 2-19 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<4>ACPI: No IRQ known for interrupt pin A of device 00:11.1<6>PCI: Using
ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or
even 'acpi=off'
<7>Registering system device pic0
<7>Registering system device rtc0
<6>SBF: Simple Boot Flag extension found and enabled.
<6>SBF: Setting boot flags 0x1
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>slab: reap timer started for cpu 0
<4>Starting kswapd
<5>aio_setup: sizeof(struct page) = 40
<6>[dff8e040] eventpoll: driver installed.
<6>Capability LSM initialized
<6>Initializing Cryptographic API
<4>
<4>testing md5
<4>test 1:
<4>d41d8cd98f00b204e9800998ecf8427e
<4>pass
<4>test 2:
<4>0cc175b9c0f1b6a831c399e269772661
<4>pass
<4>test 3:
<4>900150983cd24fb0d6963f7d28e17f72
<4>pass
<4>test 4:
<4>f96b697d7cb7938d525a2f31aaf161d0
<4>pass
<4>test 5:
<4>c3fcd3d76192e4007dfb496cca67e13b
<4>pass
<4>test 6:
<4>d174ab98d277d9f5a5611c2c9f419d9f
<4>pass
<4>test 7:
<4>57edf4a22be3c955ac49da2e2107b67a
<4>pass
<4>
<4>testing md5 across pages
<4>c3fcd3d76192e4007dfb496cca67e13b
<4>pass
<4>
<4>testing hmac_md5
<4>test 1:
<4>9294727a3638bb1c13f48ef8158bfc9d
<4>pass
<4>test 2:
<4>750c783e6ab0b503eaa86e310a5db738
<4>pass
<4>test 3:
<4>56be34521d144c88dbb8c733f0e8b3f6
<4>pass
<4>test 4:
<4>697eaf0aca3a3aea3a75164746ffaa79
<4>pass
<4>test 5:
<4>56461ef2342edc00f9bab995690efd4c
<4>pass
<4>test 6:
<4>6b1ab7fe4bd7bf8f0b62e6ce61b9d0cd
<4>pass
<4>test 7:
<4>6f630fad67cda0ee1fb1f562db3aa53e
<4>pass
<4>
<4>testing hmac_md5 across pages
<4>750c783e6ab0b503eaa86e310a5db738
<4>pass
<4>
<4>testing sha1
<4>test 1:
<4>a9993e364706816aba3e25717850c26c9cd0d89d
<4>pass
<4>test 2:
<4>84983e441c3bd26ebaae4aa1f95129e5e54670f1
<4>pass
<4>
<4>testing sha1 across pages
<4>84983e441c3bd26ebaae4aa1f95129e5e54670f1
<4>pass
<4>
<4>testing hmac_sha1
<4>test 1:
<4>b617318655057264e28bc0b6fb378c8ef146be00
<4>pass
<4>test 2:
<4>effcdf6ae5eb2fa2d27416d5f184df9c259a7c79
<4>pass
<4>test 3:
<4>125d7342b9ac11cd91a39af48aa17b4f63f175d3
<4>pass
<4>test 4:
<4>4c9007f4026250c6bc8414f9bf50c86c2d7235da
<4>pass
<4>test 5:
<4>4c1a03424b55e07fe7f27be1d58bb9324a9a5a04
<4>pass
<4>test 6:
<4>aa4ae5e15272d00e95705637ce8a3b55ed402112
<4>pass
<4>test 7:
<4>e8e99d0f45237d786d6bbaa7965c7808bbff1a91
<4>pass
<4>
<4>testing hmac_sha1 across pages
<4>effcdf6ae5eb2fa2d27416d5f184df9c259a7c79
<4>pass
<4>
<4>testing des encryption
<4>test 1:
<4>c95744256a5ed31d
<4>pass
<4>test 2:
<4>f79c892a338f4a8b
<4>pass
<4>test 3:
<4>690f5b0d9a26939b
<4>pass
<4>test 4:
<4>c95744256a5ed31df79c892a338f4a8bb49926f71fe1d490
<4>pass
<4>test 5:
<4>setkey() failed flags=100100
<4>c95744256a5ed31d
<4>pass
<4>
<4>testing des ecb encryption across pages
<4>0123456789abcdef
<4>page 1
<4>c95744256a5ed31d
<4>pass
<4>page 2
<4>f79c892a338f4a8b
<4>pass
<4>
<4>testing des ecb encryption chunking scenario A
<4>page 1
<4>c95744256a5ed31df79c892a338f
<4>pass
<4>page 2
<4>4a8bb49926f71fe1d490
<4>pass
<4>page 3
<4>f79c892a338f4a8b
<4>pass
<4>
<4>testing des ecb encryption chunking scenario B
<4>page 1
<4>c957
<4>pass
<4>page 2
<4>44
<4>pass
<4>page 3
<4>256a5e
<4>pass
<4>page 4
<4>d31df79c892a338f4a8bb49926f71fe1d490
<4>pass
<4>
<4>testing des ecb encryption chunking scenario C
<4>page 1
<4>c957
<4>pass
<4>page 2
<4>4425
<4>pass
<4>page 3
<4>6a5e
<4>pass
<4>page 4
<4>d31d
<4>pass
<4>page 5
<4>f79c892a338f4a8b
<4>pass
<4>
<4>testing des ecb encryption chunking scenario D (atomic)
<4>c95744256a5ed31d
<4>pass
<4>
<4>testing des decryption
<4>test 1:
<4>0123456789abcde7
<4>pass
<4>test 2:
<4>01a1d6d039776742
<4>pass
<4>
<4>testing des ecb decryption across pages
<4>page 1
<4>0123456789abcde7
<4>pass
<4>page 2
<4>2233445566778899
<4>pass
<4>
<4>testing des ecb decryption chunking scenario E
<4>page 1
<4>012345
<4>pass
<4>page 2
<4>6789abcde7a3997bcaaf69a0
<4>pass
<4>page 3
<4>f5
<4>pass
<4>
<4>testing des cbc encryption (atomic)
<4>test 1:
<4>ccd173ffab2039f4acd8aefddfd8a1eb468e91157888ba68
<4>pass
<4>test 2:
<4>e5c7cdde872bf27c
<4>pass
<4>test 3:
<4>43e934008c389c0f
<4>pass
<4>test 4:
<4>683788499a7c05f6
<4>pass
<4>
<4>testing des cbc encryption chunking scenario F
<4>page 1
<4>ccd173ffab2039f4acd8aefddf
<4>pass
<4>page 2
<4>d8a1eb468e91157888ba68
<4>pass
<4>
<4>testing des cbc decryption
<4>test 1:
<4>e5c7cdde872bf27c
<4>4e6f772069732074
<4>pass
<4>test 2:
<4>43e934008c389c0f
<4>68652074696d6520
<4>pass
<4>test 3:
<4>683788499a7c05f6
<4>666f7220616c6c20
<4>pass
<4>
<4>testing des cbc decryption chunking scenario G
<4>page 1
<4>666f7220
<4>pass
<4>page 2
<4>616c6c20
<4>pass
<4>
<4>testing des3 ede encryption
<4>test 1:
<4>18d748e563620572
<4>pass
<4>test 2:
<4>c07d2a0fa566fa30
<4>pass
<4>test 3:
<4>e1ef62c332fe825b
<4>pass
<4>
<4>testing des3 ede decryption
<4>test 1:
<4>736f6d6564617461
<4>pass
<4>test 2:
<4>7371756967676c65
<4>pass
<4>test 3:
<4>0000000000000000
<4>pass
<4>
<4>testing md4
<4>test 1:
<4>31d6cfe0d16ae931b73c59d7e0c089c0
<4>pass
<4>test 2:
<4>bde52cb31de33e46245e05fbdbd6fb24
<4>pass
<4>test 3:
<4>a448017aaf21d8525fc10ae87aa6729d
<4>pass
<4>test 4:
<4>d9130a8164549fe818874806e1c7014b
<4>pass
<4>test 5:
<4>d79e1c308aa5bbcdeea8ed63df412da9
<4>pass
<4>test 6:
<4>043f8582f241db351ce627e153e7f0e4
<4>pass
<4>test 7:
<4>e33b4ddc9c38f2199c3e7b164fcc0536
<4>pass
<6>PCI: Via IRQ fixup for 00:11.2, from 9 to 5
<6>PCI: Via IRQ fixup for 00:11.3, from 9 to 5
<6>Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
<6>parport0: irq 7 detected
<7>parport0: cpp_mux: aa55f00f52ad51(86)
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<7>parport0: cpp_mux: aa55f00f52ad51(86)
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(30)
<6>i2c-core.o: i2c core module version 2.6.4 (20020719)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719)
<6>i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
<6>i2c-proc.o version 2.6.4 (20020719)
<4>pty: 256 Unix98 ptys configured
<6>lp0: using parport0 (polling).
<6>Real Time Clock Driver v1.11
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 439M
<6>agpgart: Detected Via Apollo Pro KT266 chipset
<6>agpgart: AGP aperture is 128M @ 0xe0000000
<6>[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 128MB
<6>[drm] Initialized mga 3.0.2 20010321 on minor 0
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>8139too Fast Ethernet driver 0.9.26
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xe0806000, 00:10:a7:14:6f:68,
IRQ 17
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>PDC20276: IDE controller at PCI slot 00:06.0
<6>PDC20276: chipset revision 1
<6>PDC20276: not 100%% native mode: will probe irqs later
<6>PDC20276: neither IDE port enabled (BIOS)
<6>VP_IDE: IDE controller at PCI slot 00:11.1
<4>ACPI: No IRQ known for interrupt pin A of device 00:11.1<6>VP_IDE:
chipset revision 6
<6>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
<4> ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: IC35L040AVVA07-0, ATA DISK drive
<4>hda: DMA disabled
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: IBM-DHEA-38451, ATA DISK drive
<4>hdc: DMA disabled
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: host protected area => 1
<6>hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63,
UDMA(100)
<6> hda: hda1 hda2 hda3
<6>hdc: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=16383/16/63, UDMA(33)
<6> hdc: hdc1 < >
<6>SCSI subsystem driver Revision: 1.00
<4>ahc_pci:0:13:0: Host Adapter Bios disabled. Using default SCSI
device parameters
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<4> <Adaptec 2902/04/10/15/20/30C SCSI adapter>
<4> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
<4>
<4>(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
<5> Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
<5> Type: CD-ROM ANSI SCSI revision: 02
<5> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
<5> Type: CD-ROM ANSI SCSI revision: 02
<4>(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
<4>sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.12
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
<4>sr1: scsi3-mmc drive: 2x/6x cd/rw xa/form2 cdda tray
<4>Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
<6>drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
driver v2.0
<6>drivers/usb/core/hcd-pci.c: uhci-hcd @ 00:11.2, VIA Technologies,
Inc. USB
<6>drivers/usb/core/hcd-pci.c: irq 21, io base 00009400
<6>drivers/usb/core/hcd.c: new USB bus registered, assigned bus number 1
<6>drivers/usb/core/hub.c: USB hub found at 0
<6>drivers/usb/core/hub.c: 2 ports detected
<6>drivers/usb/core/hcd-pci.c: uhci-hcd @ 00:11.3, VIA Technologies,
Inc. USB (#2)
<6>drivers/usb/core/hcd-pci.c: irq 21, io base 00009000
<6>drivers/usb/core/hcd.c: new USB bus registered, assigned bus number 2
<6>drivers/usb/core/hub.c: USB hub found at 0
<6>drivers/usb/core/hub.c: 2 ports detected
<6>drivers/usb/core/usb.c: registered new driver usblp
<6>drivers/usb/class/usblp.c: v0.12: USB Printer Device Class driver
<6>Initializing USB Mass Storage driver...
<6>drivers/usb/core/usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>drivers/usb/core/usb.c: registered new driver hiddev
<6>drivers/usb/core/usb.c: registered new driver hid
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
<7>register interface 'mouse' with class 'input
<6>mice: PS/2 mouse device common for all mice
<7>register interface 'event' with class 'input
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: AT Set 2 keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>i2c-core.o: i2c core module version 2.6.4 (20020719)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719)
<6>i2c-proc.o version 2.6.4 (20020719)
<6>Advanced Linux Sound Architecture Driver Version 0.9.0rc5 (Tue Oct 29
09:19:27 2002 UTC).
<3>request_module[snd-card-0]: not ready
<3>request_module[snd-card-1]: not ready
<3>request_module[snd-card-2]: not ready
<3>request_module[snd-card-3]: not ready
<3>request_module[snd-card-4]: not ready
<3>request_module[snd-card-5]: not ready
<3>request_module[snd-card-6]: not ready
<3>request_module[snd-card-7]: not ready
<6>ALSA device list:
<6> #0: C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 17
<6> #1: Ensoniq AudioPCI ES1371 at 0xa000, irq 18
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<4>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per
conntrack
<4>ip_tables: (C) 2000-2002 Netfilter core team
<4>arp_tables: (C) 2002 David S. Miller
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>found reiserfs format "3.6" with standard journal
<6>drivers/usb/core/hub.c: new USB device 00:11.2-2, assigned address 2
<6>input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse ® with
IntelliEye] on usb-00:11.2-2
<4>Reiserfs journal params: device ide0(3,1), size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
<4>reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<6>Freeing unused kernel memory: 312k freed
<6>Adding 1052248k swap on /dev/hda2. Priority:42 extents:1
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device ide0(3,3), size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
<4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/