Attachment.
-- Silvio--J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=sis650
No fixes here.. just reports for anyone interested :(
1) sis650/5513 chipset does not work with UDMA - this was reported a while ago, and also reported fixed.. but I don't think its been tested on a sis650 specifically, which (for me) appears still broken (fs corruptions etc).
this was reported fixed in 2.4.19; i took a 2.4.18 kernel, and replaced drivers/ide/sis5513.c (theres some includes also, but perhaps not important). this came up with the same problems as 2.4.18.
2.4.18 incidentally has a function #if 0, at the end of sis5513.c, which I had to make #if 1 (remove) to get a compile (there appears to be no other declaration of this code in the tree) - this has probably been noticed a long time ago I imagine (?).
for the UDMA issues, recompiling with -->
#define BROKEN_LEVEL XFER_SW_DMA_0
gets it up and running again (ie, without UDMA).
incidentally.. the sis 0.13 code by the maintainers have patches against 2.4.18 which break when you run it with #define DEBUG, as some var names have been slightly modified.
2) External floppy drive via USB not 100% working.. No idea on this one; I've included very small snippets of bootup messages, but it's no major drama currently (works for the most part), so I don't really expect anyone to look at this (especially with the minimal info I've provided here) :)
For the sis650, maybe (?) the following will help --> [ I've no real clue how useful or non useful this is, but maybe its worth a look for the current development ]
Nov 18 15:57:19 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 18 15:57:19 localhost kernel: SIS5513: IDE controller on PCI bus 00 dev 15 Nov 18 15:57:19 localhost kernel: SIS5513: chipset revision 208 Nov 18 15:57:19 localhost kernel: SIS5513: not 100%% native mode: will probe irqs later Nov 18 15:57:19 localhost kernel: SiS650 ATA 100 controller Nov 18 15:57:19 localhost kernel: SIS5513 pci_init_sis5513 start Nov 18 15:57:19 localhost kernel: SIS5513 dump: Nov 18 15:57:19 localhost kernel: 0x0:0x39 0x1:0x10 0x2:0x13 0x3:0x55 0x4:0x5 0x5:0x0 0x6:0x0 0x7:0x0 0x8:0xd0 0x9:0x80 0xa:0x1 0xb:0x1 0xc:0x0 0xd:0x80 0xe:0x80 0xf:0x0 Nov 18 15:57:19 localhost kernel: 0x10:0x0 0x11:0x0 0x12:0x0 0x13:0x0 0x14:0x0 0x15:0x0 0x16:0x0 0x17:0x0 0x18:0x0 0x19:0x0 0x1a:0x0 0x1b:0x0 0x1c:0x0 0x1d:0x0 0x1e:0x0 0x1f:0x0 Nov 18 15:57:19 localhost kernel: 0x20:0x1 0x21:0xff 0x22:0x0 0x23:0x0 0x24:0x0 0x25:0x0 0x26:0x0 0x27:0x0 0x28:0x0 0x29:0x0 0x2a:0x0 0x2b:0x0 0x2c:0x39 0x2d:0x10 0x2e:0x13 0x2f:0x55 Nov 18 15:57:19 localhost kernel: 0x30:0x0 0x31:0x0 0x32:0x0 0x33:0x0 0x34:0x0 0x35:0x0 0x36:0x0 0x37:0x0 0x38:0x0 0x39:0x0 0x3a:0x0 0x3b:0x0 0x3c:0x0 0x3d:0x0 0x3e:0x0 0x3f:0x0 Nov 18 15:57:19 localhost kernel: 0x40:0x31 0x41:0x81 0x42:0x0 0x43:0x0 0x44:0x31 0x45:0x85 0x46:0x0 0x47:0x0 0x48:0xf8 0x49:0x1 0x4a:0xe6 0x4b:0x11 0x4c:0x0 0x4d:0x2 0x4e:0x0 0x4f:0x2 0x50:0x1 0x51:0x0 0x52:0x1 0x53:0x6 0x54:0x0 0x55:0x0 0x56:0x0 0x57:0x0 Nov 18 15:57:19 localhost kernel: SIS5513: pci_init_sis5513 end, changed registers: Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:19 localhost kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA Nov 18 15:57:19 localhost kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Nov 18 15:57:19 localhost kernel: hda: IC25N040ATCS04-0, ATA DISK drive Nov 18 15:57:19 localhost kernel: hdc: QSI CD-RW/DVD-ROM SBW-081, ATAPI CD/DVD-ROM drive Nov 18 15:57:19 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 18 15:57:19 localhost nfslock: rpc.statd startup succeeded Nov 18 15:57:19 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp, drive 0 Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers: Nov 18 15:57:19 localhost rpc.statd[672]: Version 1.0.1 Starting Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers: Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:19 localhost keytable: Loading keymap: Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:19 localhost keytable: Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp, drive 0 Nov 18 15:57:19 localhost keytable: Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers: Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:19 localhost rc: Starting keytable: succeeded Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers: Nov 18 15:57:19 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4 Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp, drive 0 Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4 Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_chipset_for_dma, drive 0, ultra 3f, udma_66 0 Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset, drive 0, speed 66 Nov 18 15:57:20 localhost kernel: SIS5513: BROKEN_LEVEL activated, speed=66 -> speed=16 Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset end, changed registers: Nov 18 15:57:20 localhost random: Initializing random number generator: succeeded Nov 18 15:57:20 localhost kernel: 0x41: 0x81 -> 0x1 Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: error=0x04 { DriveStatusError } Nov 18 15:57:20 localhost kernel: SIS5513: config_chipset_for_dma, drive 0, ultra 3f, udma_66 0 Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset, drive 0, speed 34 Nov 18 15:57:20 localhost kernel: SIS5513: BROKEN_LEVEL activated, speed=34 -> speed=16 Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset end, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: error=0x04 { DriveStatusError } Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp, drive 0 Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4 Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers: Nov 18 15:57:20 localhost kernel: none Nov 18 15:57:20 localhost kernel: hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63
-- some logs probably not relevant (re floppy), but oh well..
Nov 18 15:57:20 localhost kernel: usb.c: USB device 2 (vend/prod 0x3ee/0x6901) is not claimed by any active driver. Nov 18 15:57:20 localhost kernel: SCSI subsystem driver Revision: 1.00 Nov 18 15:57:20 localhost kernel: Initializing USB Mass Storage driver... Nov 18 15:57:20 localhost kernel: usb.c: registered new driver usb-storage Nov 18 15:57:20 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Nov 18 15:57:20 localhost kernel: Vendor: MITSUMI Model: USB FDD Rev: 1039 Nov 18 15:57:20 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Nov 18 15:57:20 localhost kernel: USB Mass Storage support registered.
-- Silvio--J2SCkAp4GZ/dPZZf-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/