Hi,
Here's a v850 update for 2.5.48-uc0 (3 new files):
--=-=-=
Content-Type: text/x-patch; charset=iso-2022-jp
Content-Disposition: attachment;
filename=linux-2.5.48-uc0-v850-20021119-dist.patch
Content-Description: linux-2.5.48-uc0-v850-20021119-dist.patch
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/Kconfig arch/v850/Kconfig
--- ../orig/linux-2.5.48-uc0/arch/v850/Kconfig 2002-11-11 13:04:37.000000000 +0900
+++ arch/v850/Kconfig 2002-11-19 15:26:01.000000000 +0900
@@ -63,6 +63,8 @@
bool "NA85E2C-FPGA"
config V850E2_ANNA
bool "Anna"
+ config V850E_AS85EP1
+ bool "AS85EP1"
endchoice
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/anna-rom.ld arch/v850/anna-rom.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/anna-rom.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/anna-rom.ld 2002-11-19 15:24:18.000000000 +0900
@@ -81,7 +81,7 @@
*(.root)
__root_fs_image_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/anna.ld arch/v850/anna.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/anna.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/anna.ld 2002-11-19 15:24:18.000000000 +0900
@@ -104,7 +104,7 @@
. = ALIGN (4) ;
___initcall_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/as85ep1.ld arch/v850/as85ep1.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/as85ep1.ld 1970-01-01 09:00:00.000000000 +0900
+++ arch/v850/as85ep1.ld 2002-11-19 15:24:18.000000000 +0900
@@ -0,0 +1,145 @@
+/* Linker script for the NEC AS85EP1 V850E evaluation board
+ (CONFIG_V850E_AS85EP1). */
+
+/* Note, all symbols are prefixed with an extra `_' for compatibility with
+ the existing linux sources. */
+
+_jiffies = _jiffies_64 ;
+
+MEMORY {
+ /* 1MB of internal memory ($BFbB"L?Na(BRAM). */
+ iMEM0 : ORIGIN = 0, LENGTH = 0x00100000
+
+ /* 1MB of static RAM. */
+ SRAM : ORIGIN = 0x00400000, LENGTH = 0x00100000
+
+ /* 64MB of DRAM. This can actually be at one of two positions,
+ determined by jump JP3; we use the second position because the
+ first only allows access to 56MB. */
+ SDRAM : ORIGIN = 0x04000000, LENGTH = 0x04000000
+}
+
+SECTIONS {
+ .resetv : {
+ __intv_start = . ;
+ *(.intv.reset) /* Reset vector */
+ } > iMEM0
+
+ .text : {
+ __kram_start = . ;
+
+ __stext = . ;
+ *(.text)
+ *(.exit.text) /* 2.5 convention */
+ *(.text.exit) /* 2.4 convention */
+ *(.text.lock)
+ *(.exitcall.exit)
+ __real_etext = . ; /* There may be data after here. */
+ *(.rodata)
+
+ . = ALIGN (0x4) ;
+ *(.kstrtab)
+
+ . = ALIGN (4) ;
+ *(.call_table_data)
+ *(.call_table_text)
+
+ . = ALIGN (16) ; /* Exception table. */
+ ___start___ex_table = . ;
+ *(__ex_table)
+ ___stop___ex_table = . ;
+
+ ___start___ksymtab = . ;/* Kernel symbol table. */
+ *(__ksymtab)
+ ___stop___ksymtab = . ;
+ . = ALIGN (4) ;
+ __etext = . ;
+ } > SRAM
+
+ .data ALIGN (0x4) : {
+ __sdata = . ;
+ ___data_start = . ;
+ *(.data)
+ *(.exit.data) /* 2.5 convention */
+ *(.data.exit) /* 2.4 convention */
+ . = ALIGN (16) ;
+ *(.data.cacheline_aligned)
+ . = ALIGN (0x2000) ;
+ *(.data.init_task)
+ . = ALIGN (0x2000) ;
+ __edata = . ;
+ } > SRAM
+
+ .bss ALIGN (0x4) : {
+ __sbss = . ;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN (4) ;
+ __init_stack_end = . ;
+ __ebss = . ;
+ } > SRAM
+
+ .init ALIGN (4096) : {
+ __init_start = . ;
+ *(.init.text) /* 2.5 convention */
+ *(.init.data)
+ *(.text.init) /* 2.4 convention */
+ *(.data.init)
+ . = ALIGN (16) ;
+ ___setup_start = . ;
+ *(.init.setup) /* 2.5 convention */
+ *(.setup.init) /* 2.4 convention */
+ ___setup_end = . ;
+ ___initcall_start = . ;
+ *(.initcall.init)
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ . = ALIGN (4) ;
+ ___initcall_end = . ;
+
+ . = ALIGN (4) ;
+ ___initramfs_start = . ;
+ *(.init.ramfs)
+ ___initramfs_end = . ;
+
+ /* We stick most of the interrupt vectors here; they'll be
+ copied into the proper location by the early init code (we
+ can't put them directly in the right place because of
+ hardware bugs). The vectors shouldn't need to be
+ relocated, so we don't have to use `> ... AT> ...' to
+ split the load/vm addresses (and we can't because of
+ problems with the loader). */
+ . = ALIGN (0x10) ;
+ __intv_copy_src_start = . ;
+ *(.intv.common) /* Vectors common to all v850e proc. */
+ *(.intv.mach) /* Machine-specific int. vectors. */
+ . = ALIGN (0x10) ;
+ __intv_copy_src_end = . ;
+
+ /* This is here so that when we free init memory, the initial
+ load-area of the interrupt vectors is freed too. */
+ __init_end = . ;
+ __kram_end = . ;
+
+ __bootmap = . ;
+ . = . + 4096 ; /* enough for 128MB. */
+ } > SRAM
+
+ /* Where we end up putting the vectors. */
+ __intv_copy_dst_start = 0x10 ;
+ __intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
+
+ __intv_end = __intv_copy_dst_end ;
+
+ /* Device contents for the root filesystem. */
+ .root : {
+ __root_fs_image_start = . ;
+ *(.root)
+ __root_fs_image_end = . ;
+ } > SDRAM
+}
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/Makefile arch/v850/kernel/Makefile
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/Makefile 2002-11-05 11:25:21.000000000 +0900
+++ arch/v850/kernel/Makefile 2002-11-19 15:22:34.000000000 +0900
@@ -20,6 +20,7 @@
obj-$(CONFIG_V850E_MA1) += ma.o nb85e_utils.o nb85e_timer_d.o
obj-$(CONFIG_V850E_NB85E) += nb85e_intc.o
obj-$(CONFIG_V850E2_ANNA) += anna.o nb85e_intc.o nb85e_utils.o nb85e_timer_d.o
+obj-$(CONFIG_V850E_AS85EP1) += as85ep1.o nb85e_intc.o nb85e_utils.o nb85e_timer_d.o
# platform-specific code
obj-$(CONFIG_V850E_SIM) += sim.o simcons.o
obj-$(CONFIG_V850E2_SIM85E2C) += sim85e2c.o nb85e_intc.o memcons.o
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/anna.c arch/v850/kernel/anna.c
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/anna.c 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/kernel/anna.c 2002-11-19 15:22:34.000000000 +0900
@@ -47,7 +47,7 @@
ANNA_BPC = 0;
ANNA_BSC = 0xAAAA;
ANNA_BEC = 0;
- ANNA_BHC = 0x00FF; /* icache all memory, dcache none */
+ ANNA_BHC = 0xFFFF; /* icache all memory, dcache all */
ANNA_BCT(0) = 0xB088;
ANNA_BCT(1) = 0x0008;
ANNA_DWC(0) = 0x0027;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/as85ep1.c arch/v850/kernel/as85ep1.c
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/as85ep1.c 1970-01-01 09:00:00.000000000 +0900
+++ arch/v850/kernel/as85ep1.c 2002-11-19 15:22:34.000000000 +0900
@@ -0,0 +1,241 @@
+/*
+ * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
+ *
+ * Copyright (C) 2002 NEC Corporation
+ * Copyright (C) 2002 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/major.h>
+#include <linux/irq.h>
+
+#include <asm/machdep.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/nb85e_timer_d.h>
+#include <asm/nb85e_uart.h>
+
+#include "mach.h"
+
+
+/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
+ mach_reserve_bootmem for details); use both as one big area. */
+#define RAM_START SRAM_ADDR
+#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
+
+/* The bits of this port are connected to an 8-LED bar-graph. */
+#define LEDS_PORT 4
+
+
+static void as85ep1_led_tick (void);
+
+extern char _intv_copy_src_start, _intv_copy_src_end;
+extern char _intv_copy_dst_start;
+
+
+void __init mach_early_init (void)
+{
+ const u32 *src;
+ register u32 *dst asm ("ep");
+
+ AS85EP1_CSC(0) = 0x0403;
+ AS85EP1_BCT(0) = 0xB8B8;
+ AS85EP1_DWC(0) = 0x0104;
+ AS85EP1_BCC = 0x0012;
+ AS85EP1_ASC = 0;
+ AS85EP1_LBS = 0x00A9;
+ AS85EP1_RFS(1) = 0x8205;
+ AS85EP1_RFS(3) = 0x8205;
+ AS85EP1_SCR(1) = 0x20A9;
+ AS85EP1_SCR(3) = 0x20A9;
+
+ AS85EP1_PORT_PMC(6) = 0xFF; /* A20-25, A0,A1 $BM-8z(B */
+ AS85EP1_PORT_PMC(7) = 0x0E; /* CS1,2,3 $BM-8z(B */
+ AS85EP1_PORT_PMC(9) = 0xFF; /* D16-23 $BM-8z(B */
+ AS85EP1_PORT_PMC(10) = 0xFF; /* D24-31 $BM-8z(B */
+
+ AS85EP1_IRAMM = 0x3; /* $BFbB"L?Na(BRAM$B$O!V(Bwrite-mode$B!W$K$J$j$^$9(B */
+
+ /* The early chip we have is buggy, so that writing the interrupt
+ vectors into low RAM may screw up, so for non-ROM kernels, we
+ only rely on the reset vector being downloaded, and copy the
+ rest of the interrupt vectors into place here. The specific bug
+ is that writing address N, where (N & 0x10) == 0x10, will _also_
+ write to address (N - 0x10). We avoid this (effectively) by
+ writing in 16-byte chunks backwards from the end. */
+ src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
+ dst = (u32 *)&_intv_copy_dst_start
+ + (src - (u32 *)&_intv_copy_src_start);
+ do {
+ u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
+ dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
+ dst -= 4;
+ src -= 4;
+ } while (src > (u32 *)&_intv_copy_src_start);
+
+ AS85EP1_IRAMM = 0x0; /* $BFbB"L?Na(BRAM$B$O!V(Bread-mode$B!W$K$J$j$^$9(B */
+
+ nb85e_intc_disable_irqs ();
+}
+
+void __init mach_setup (char **cmdline)
+{
+#ifdef CONFIG_V850E_NB85E_UART_CONSOLE
+ nb85e_uart_cons_init (1);
+#endif
+
+ AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
+ AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins. */
+ mach_tick = as85ep1_led_tick;
+
+ ROOT_DEV = MKDEV (BLKMEM_MAJOR, 0);
+}
+
+void __init mach_get_physical_ram (unsigned long *ram_start,
+ unsigned long *ram_len)
+{
+ *ram_start = RAM_START;
+ *ram_len = RAM_END - RAM_START;
+}
+
+void __init mach_reserve_bootmem ()
+{
+ extern char _root_fs_image_start, _root_fs_image_end;
+ u32 root_fs_image_start = (u32)&_root_fs_image_start;
+ u32 root_fs_image_end = (u32)&_root_fs_image_end;
+
+ /* We can't use the space between SRAM and SDRAM, so prevent the
+ kernel from trying. */
+ reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
+ SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE));
+
+ /* Reserve the memory used by the root filesystem image if it's
+ in RAM. */
+ if (root_fs_image_end > root_fs_image_start
+ && root_fs_image_start >= RAM_START
+ && root_fs_image_start < RAM_END)
+ reserve_bootmem (root_fs_image_start,
+ root_fs_image_end - root_fs_image_start);
+}
+
+void mach_gettimeofday (struct timeval *tv)
+{
+ tv->tv_sec = 0;
+ tv->tv_usec = 0;
+}
+
+void __init mach_sched_init (struct irqaction *timer_action)
+{
+ /* Start hardware timer. */
+ nb85e_timer_d_configure (0, HZ);
+ /* Install timer interrupt handler. */
+ setup_irq (IRQ_INTCMD(0), timer_action);
+}
+
+static struct nb85e_intc_irq_init irq_inits[] = {
+ { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
+ { "CCC", IRQ_INTCCC(0), IRQ_INTCCC_NUM, 1, 5 },
+ { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
+ { "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM, 3, 3 },
+ { "SR", IRQ_INTSR(0), IRQ_INTSR_NUM, 3, 4 },
+ { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 },
+ { 0 }
+};
+#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+
+static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
+
+void __init mach_init_irqs (void)
+{
+ nb85e_intc_init_irq_types (irq_inits, hw_itypes);
+}
+
+void machine_restart (char *__unused)
+{
+#ifdef CONFIG_RESET_GUARD
+ disable_reset_guard ();
+#endif
+ asm ("jmp r0"); /* Jump to the reset vector. */
+}
+
+void machine_halt (void)
+{
+#ifdef CONFIG_RESET_GUARD
+ disable_reset_guard ();
+#endif
+ local_irq_disable (); /* Ignore all interrupts. */
+ AS85EP1_PORT_IO (LEDS_PORT) = 0xAA; /* Note that we halted. */
+ for (;;)
+ asm ("halt; nop; nop; nop; nop; nop");
+}
+
+void machine_power_off (void)
+{
+ machine_halt ();
+}
+
+/* Called before configuring an on-chip UART. */
+void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
+{
+ /* Make the shared uart/port pins be uart pins. */
+ AS85EP1_PORT_PMC(3) |= (0x5 << chan);
+
+ /* The AS85EP1 connects some general-purpose I/O pins on the CPU to
+ the RTS/CTS lines of UART 1's serial connection. I/O pins P53
+ and P54 are RTS and CTS respectively. */
+ if (chan == 1) {
+ /* Put P53 & P54 in I/O port mode. */
+ AS85EP1_PORT_PMC(5) &= ~0x18;
+ /* Make P53 an output, and P54 an input. */
+ AS85EP1_PORT_PM(5) |= 0x10;
+ }
+}
+
+/* Minimum and maximum bounds for the moving upper LED boundary in the
+ clock tick display. */
+#define MIN_MAX_POS 0
+#define MAX_MAX_POS 7
+
+/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
+ we pick 6 and 0 as above, we get 49 cycles, which is when divided into
+ the standard 100 value for HZ, gives us an almost 1s total time. */
+#define TICKS_PER_FRAME \
+ (HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
+
+static void as85ep1_led_tick ()
+{
+ static unsigned counter = 0;
+
+ if (++counter == TICKS_PER_FRAME) {
+ static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
+
+ if (dir > 0 && pos == max_pos) {
+ dir = -1;
+ if (max_pos == MIN_MAX_POS)
+ max_pos = MAX_MAX_POS;
+ else
+ max_pos--;
+ } else {
+ if (dir < 0 && pos == 0)
+ dir = 1;
+
+ if (pos + dir <= max_pos) {
+ /* Each bit of port 0 has a LED. */
+ set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
+ pos += dir;
+ clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
+ }
+ }
+
+ counter = 0;
+ }
+}
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/entry.S arch/v850/kernel/entry.S
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/entry.S 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/kernel/entry.S 2002-11-19 16:12:26.000000000 +0900
@@ -908,10 +908,10 @@
.long CSYM(sys_adjtimex)
.long CSYM(sys_ni_syscall) // 125 - sys_mprotect
.long CSYM(sys_sigprocmask)
- .long CSYM(sys_create_module)
+ .long CSYM(sys_ni_syscall) // sys_create_module
.long CSYM(sys_init_module)
.long CSYM(sys_delete_module)
- .long CSYM(sys_get_kernel_syms) // 130
+ .long CSYM(sys_ni_syscall) // 130 - sys_get_kernel_syms
.long CSYM(sys_quotactl)
.long CSYM(sys_getpgid)
.long CSYM(sys_fchdir)
@@ -948,7 +948,7 @@
.long CSYM(sys_setresuid)
.long CSYM(sys_getresuid) // 165
.long CSYM(sys_ni_syscall) // for vm86
- .long CSYM(sys_query_module)
+ .long CSYM(sys_ni_syscall) // sys_query_module
.long CSYM(sys_poll)
.long CSYM(sys_nfsservctl)
.long CSYM(sys_setresgid) // 170
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/procfs.c arch/v850/kernel/procfs.c
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/procfs.c 2002-11-19 10:11:31.000000000 +0900
+++ arch/v850/kernel/procfs.c 2002-11-19 15:22:34.000000000 +0900
@@ -24,7 +24,7 @@
#else
seq_printf (m, "CPU-Model: %s\n", CPU_MODEL);
#endif
-
+
#ifdef CPU_CLOCK_FREQ
seq_printf (m, "CPU-Clock: %ld (%ld MHz)\n",
(long)CPU_CLOCK_FREQ,
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/kernel/setup.c arch/v850/kernel/setup.c
--- ../orig/linux-2.5.48-uc0/arch/v850/kernel/setup.c 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/kernel/setup.c 2002-11-19 15:22:34.000000000 +0900
@@ -270,6 +270,16 @@
zones_size[ZONE_DMA]
= ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
+ /* The allocator is very picky about the address of the first
+ allocatable page -- it must be at least as aligned as the
+ maximum allocation -- so try to detect cases where it will get
+ confused and signal them at compile time (this is a common
+ problem when porting to a new platform with ). There is a
+ similar runtime check in free_area_init_core. */
+#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
+#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
+#endif
+
free_area_init_node (0, NODE_DATA(0), 0, zones_size,
ADDR_TO_PAGE (PAGE_OFFSET), 0);
mem_map = NODE_DATA(0)->node_mem_map;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb-ksram.ld arch/v850/rte_ma1_cb-ksram.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb-ksram.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/rte_ma1_cb-ksram.ld 2002-11-19 15:24:18.000000000 +0900
@@ -94,7 +94,7 @@
. = ALIGN (4) ;
___initcall_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb-rom.ld arch/v850/rte_ma1_cb-rom.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb-rom.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/rte_ma1_cb-rom.ld 2002-11-19 15:24:17.000000000 +0900
@@ -46,7 +46,7 @@
. = ALIGN (4) ;
__etext = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb.ld arch/v850/rte_ma1_cb.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/rte_ma1_cb.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/rte_ma1_cb.ld 2002-11-19 15:24:17.000000000 +0900
@@ -99,7 +99,7 @@
. = ALIGN (4) ;
___initcall_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/sim.ld arch/v850/sim.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/sim.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/sim.ld 2002-11-19 15:24:17.000000000 +0900
@@ -97,7 +97,7 @@
. = ALIGN (4) ;
___initcall_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/sim85e2c.ld arch/v850/sim85e2c.ld
--- ../orig/linux-2.5.48-uc0/arch/v850/sim85e2c.ld 2002-11-19 15:00:05.000000000 +0900
+++ arch/v850/sim85e2c.ld 2002-11-19 15:24:17.000000000 +0900
@@ -87,7 +87,7 @@
. = ALIGN (4) ;
___initcall_end = . ;
- . = ALIGN (4096) ;
+ . = ALIGN (4) ;
___initramfs_start = . ;
*(.init.ramfs)
___initramfs_end = . ;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/arch/v850/vmlinux.lds.S arch/v850/vmlinux.lds.S
--- ../orig/linux-2.5.48-uc0/arch/v850/vmlinux.lds.S 2002-11-05 11:25:22.000000000 +0900
+++ arch/v850/vmlinux.lds.S 2002-11-19 15:26:12.000000000 +0900
@@ -20,6 +20,10 @@
# endif
#endif
+#ifdef CONFIG_V850E_AS85EP1
+# include "as85ep1.ld"
+#endif
+
#ifdef CONFIG_RTE_CB_MA1
# ifdef CONFIG_ROM_KERNEL
# include "rte_ma1_cb-rom.ld"
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/drivers/serial/Kconfig drivers/serial/Kconfig
--- ../orig/linux-2.5.48-uc0/drivers/serial/Kconfig 2002-11-19 10:11:44.000000000 +0900
+++ drivers/serial/Kconfig 2002-11-19 15:26:01.000000000 +0900
@@ -365,7 +365,7 @@
config V850E_NB85E_UART
bool "NEC V850E on-chip UART support"
- depends on V850E_NB85E || V850E2_ANNA
+ depends on V850E_NB85E || V850E2_ANNA || V850E_AS85EP1
default y
config V850E_NB85E_UART_CONSOLE
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/include/asm-v850/as85ep1.h include/asm-v850/as85ep1.h
--- ../orig/linux-2.5.48-uc0/include/asm-v850/as85ep1.h 1970-01-01 09:00:00.000000000 +0900
+++ include/asm-v850/as85ep1.h 2002-11-19 15:22:34.000000000 +0900
@@ -0,0 +1,160 @@
+/*
+ * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
+ *
+ * Copyright (C) 2001,2002 NEC Corporation
+ * Copyright (C) 2001,2002 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_AS85EP1_H__
+#define __V850_AS85EP1_H__
+
+
+#define CPU_ARCH "v850e"
+#define CPU_MODEL "as85ep1"
+#define CPU_MODEL_LONG "NEC V850E/AS85EP1"
+#define PLATFORM "AS85EP1"
+#define PLATFORM_LONG "NEC V850E/AS85EP1 evaluation board"
+
+#define CPU_CLOCK_FREQ 100000000 /* 100MHz */
+#define SYS_CLOCK_FREQ CPU_CLOCK_FREQ
+
+
+/* 1MB of static RAM. */
+#define SRAM_ADDR 0x00400000
+#define SRAM_SIZE 0x00100000 /* 1MB */
+/* 64MB of DRAM. This can actually be at one of two positions, determined
+ by jump JP3; we use the second position because the first only allows
+ access to 56MB. */
+#define SDRAM_ADDR 0x04000000
+#define SDRAM_SIZE 0x04000000 /* 64MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+ accessible using a load instruction relative to R0. The AS85EP1 chip
+ 16K of internal RAM located slightly before I/O space. */
+#define R0_RAM_ADDR 0xFFFF8000
+
+
+/* AS85EP1 specific control registers. */
+#define AS85EP1_CSC_ADDR(n) (0xFFFFF060 + (n) * 2)
+#define AS85EP1_CSC(n) (*(volatile u16 *)AS85EP1_CSC_ADDR(n))
+#define AS85EP1_BSC_ADDR 0xFFFFF066
+#define AS85EP1_BSC (*(volatile u16 *)AS85EP1_BSC_ADDR)
+#define AS85EP1_BCT_ADDR(n) (0xFFFFF480 + (n) * 2)
+#define AS85EP1_BCT(n) (*(volatile u16 *)AS85EP1_BCT_ADDR(n))
+#define AS85EP1_DWC_ADDR(n) (0xFFFFF484 + (n) * 2)
+#define AS85EP1_DWC(n) (*(volatile u16 *)AS85EP1_DWC_ADDR(n))
+#define AS85EP1_BCC_ADDR 0xFFFFF488
+#define AS85EP1_BCC (*(volatile u16 *)AS85EP1_BCC_ADDR)
+#define AS85EP1_ASC_ADDR 0xFFFFF48A
+#define AS85EP1_ASC (*(volatile u16 *)AS85EP1_ASC_ADDR)
+#define AS85EP1_BCP_ADDR 0xFFFFF48C
+#define AS85EP1_BCP (*(volatile u16 *)AS85EP1_BCP_ADDR)
+#define AS85EP1_LBS_ADDR 0xFFFFF48E
+#define AS85EP1_LBS (*(volatile u16 *)AS85EP1_LBS_ADDR)
+#define AS85EP1_BMC_ADDR 0xFFFFF498
+#define AS85EP1_BMC (*(volatile u16 *)AS85EP1_BMC_ADDR)
+#define AS85EP1_PRC_ADDR 0xFFFFF49A
+#define AS85EP1_PRC (*(volatile u16 *)AS85EP1_PRC_ADDR)
+#define AS85EP1_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4)
+#define AS85EP1_SCR(n) (*(volatile u16 *)AS85EP1_SCR_ADDR(n))
+#define AS85EP1_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4)
+#define AS85EP1_RFS(n) (*(volatile u16 *)AS85EP1_RFS_ADDR(n))
+#define AS85EP1_IRAMM_ADDR 0xFFFFF80A
+#define AS85EP1_IRAMM (*(volatile u8 *)AS85EP1_IRAMM_ADDR)
+
+
+
+/* I/O port P0-P13. */
+/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */
+#define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
+#define AS85EP1_PORT_IO(n) (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input). */
+#define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2)
+#define AS85EP1_PORT_PM(n) (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
+#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
+#define AS85EP1_PORT_PMC(n) (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
+
+
+/* NB85E-style interrupt system. */
+#include <asm/nb85e_intc.h>
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
+#define IRQ_INTCCC(n) (0x0C + (n))
+#define IRQ_INTCCC_NUM 8
+#define IRQ_INTCMD(n) (0x14 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM 6
+#define IRQ_INTSRE(n) (0x1E + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM 2
+#define IRQ_INTSR(n) (0x1F + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM 2
+#define IRQ_INTST(n) (0x20 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM 2
+
+#define NUM_CPU_IRQS 64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts. */
+extern void as85ep1_init_irqs (void);
+#endif
+
+
+/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels). */
+#define NB85E_UART_NUM_CHANNELS 2
+#define NB85E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 4)
+#define NB85E_UART_CHIP_NAME "V850E/NA85E"
+
+/* This is a function that gets called before configuring the UART. */
+#define NB85E_UART_PRE_CONFIGURE as85ep1_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void as85ep1_uart_pre_configure (unsigned chan,
+ unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P54 (bit 4 of port 5). */
+#define NB85E_UART_CTS(chan) ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
+/* RTS for UART channel 1 is pin P53 (bit 3 of port 5). */
+#define NB85E_UART_SET_RTS(chan, val) \
+ do { \
+ if (chan == 1) { \
+ unsigned old = AS85EP1_PORT_IO(5); \
+ if (val) \
+ AS85EP1_PORT_IO(5) = old & ~0x8; \
+ else \
+ AS85EP1_PORT_IO(5) = old | 0x8; \
+ } \
+ } while (0)
+
+
+/* Timer C details. */
+#define NB85E_TIMER_C_BASE_ADDR 0xFFFFF600
+
+/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
+#define NB85E_TIMER_D_BASE_ADDR 0xFFFFF540
+#define NB85E_TIMER_D_TMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x0)
+#define NB85E_TIMER_D_CMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x2)
+#define NB85E_TIMER_D_TMCD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x4)
+
+#define NB85E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ
+#define NB85E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ 100
+#endif
+
+
+#endif /* __V850_AS85EP1_H__ */
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/include/asm-v850/hardirq.h include/asm-v850/hardirq.h
--- ../orig/linux-2.5.48-uc0/include/asm-v850/hardirq.h 2002-11-05 11:25:31.000000000 +0900
+++ include/asm-v850/hardirq.h 2002-11-19 15:29:53.000000000 +0900
@@ -3,6 +3,7 @@
#include <linux/config.h>
#include <linux/threads.h>
+#include <linux/cache.h>
typedef struct {
unsigned int __softirq_pending;
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/include/asm-v850/machdep.h include/asm-v850/machdep.h
--- ../orig/linux-2.5.48-uc0/include/asm-v850/machdep.h 2002-11-05 11:25:32.000000000 +0900
+++ include/asm-v850/machdep.h 2002-11-19 15:22:34.000000000 +0900
@@ -24,10 +24,13 @@
#include <asm/teg.h>
#endif
-/* Anna is both a chip _and_ a platform, so put it in the middle... */
+/* These are both chips _and_ platforms, so put them in the middle... */
#ifdef CONFIG_V850E2_ANNA
#include <asm/anna.h>
#endif
+#ifdef CONFIG_V850E_AS85EP1
+#include <asm/as85ep1.h>
+#endif
/* platforms */
#ifdef CONFIG_RTE_CB_MA1
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/include/asm-v850/stat.h include/asm-v850/stat.h
--- ../orig/linux-2.5.48-uc0/include/asm-v850/stat.h 2002-11-05 11:25:32.000000000 +0900
+++ include/asm-v850/stat.h 2002-11-19 15:36:30.000000000 +0900
@@ -46,13 +46,13 @@
unsigned long __unused4; /* future possible st_blocks high bits */
unsigned long st_atime;
- unsigned long __unused5;
+ unsigned long st_atime_nsec;
unsigned long st_mtime;
- unsigned long __unused6;
+ unsigned long st_mtime_nsec;
unsigned long st_ctime;
- unsigned long __unused7; /* high 32 bits of ctime someday */
+ unsigned long st_ctime_nsec;
unsigned long __unused8;
};
diff -ruN -X../cludes ../orig/linux-2.5.48-uc0/include/asm-v850/unistd.h include/asm-v850/unistd.h
--- ../orig/linux-2.5.48-uc0/include/asm-v850/unistd.h 2002-11-05 11:25:32.000000000 +0900
+++ include/asm-v850/unistd.h 2002-11-19 15:22:34.000000000 +0900
@@ -239,11 +239,18 @@
#define SYSCALL_SHORT_CLOBBERS SYSCALL_CLOBBERS, "r13", "r14"
+/* User programs sometimes end up including this header file
+ (indirectly, via uClibc header files), so I'm a bit nervous just
+ including <linux/compiler.h>. */
+#if !defined(__builtin_expect) && __GNUC__ == 2 && __GNUC_MINOR__ < 96
+#define __builtin_expect(x, expected_value) (x)
+#endif
+
#define __syscall_return(type, res) \
do { \
/* user-visible error numbers are in the range -1 - -124: \
see <asm-v850/errno.h> */ \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if (__builtin_expect ((unsigned long)(res) >= (unsigned long)(-125), 0)) { \
errno = -(res); \
res = -1; \
} \
@@ -340,6 +347,30 @@
__syscall_return (type, __ret); \
}
+#if __GNUC__ < 3
+/* In older versions of gcc, `asm' statements with more than 10
+ input/output arguments produce a fatal error. To work around this
+ problem, we use two versions, one for gcc-3.x and one for earlier
+ versions of gcc (the `earlier gcc' version doesn't work with gcc-3.x
+ because gcc-3.x doesn't allow clobbers to also be input arguments). */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f) \
+ __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP \
+ : "=r" (ret), "=r" (syscall) \
+ : "1" (syscall), \
+ "r" (a), "r" (b), "r" (c), "r" (d), \
+ "r" (e), "r" (f) \
+ : SYSCALL_CLOBBERS, SYSCALL_ARG4, SYSCALL_ARG5);
+#else /* __GNUC__ >= 3 */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f) \
+ __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP \
+ : "=r" (ret), "=r" (syscall), \
+ "=r" (e), "=r" (f) \
+ : "1" (syscall), \
+ "r" (a), "r" (b), "r" (c), "r" (d), \
+ "2" (e), "3" (f) \
+ : SYSCALL_CLOBBERS);
+#endif
+
#define _syscall6(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e, ftype, f) \
type name (atype a, btype b, ctype c, dtype d, etype e, ftype f) \
{ \
@@ -351,13 +382,7 @@
register etype __f __asm__ (SYSCALL_ARG5) = f; \
register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \
register unsigned long __ret __asm__ (SYSCALL_RET); \
- __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP \
- : "=r" (__ret), "=r" (__syscall), \
- "=r" (__e), "=r" (__f) \
- : "1" (__syscall), \
- "r" (__a), "r" (__b), "r" (__c), "r" (__d), \
- "2" (__e), "3" (__f) \
- : SYSCALL_CLOBBERS); \
+ __SYSCALL6_TRAP(__syscall, __ret, __a, __b, __c, __d, __e, __f); \
__syscall_return (type, __ret); \
}
@@ -398,8 +423,8 @@
/*
* "Conditional" syscalls
*/
-#define cond_syscall(name) \
- asm (".weak\t" C_SYMBOL_STRING(name) ";" \
+#define cond_syscall(name) \
+ asm (".weak\t" C_SYMBOL_STRING(name) ";" \
".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall));
#if 0
/* This doesn't work if there's a function prototype for NAME visible,
--=-=-=
Content-Type: text/plain; charset=iso-2022-jp
Thanks,
-Miles
-- $B<+$i$r6u$K$7$F!"?4$r3+$/;~!"F;$O3+$+$l$k(B--=-=-=-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/