Re: 2.4.20-rc1-ac4 HPT374 doesn't find connected ide drives

Karsten Desler (soohrt@soohrt.org)
Tue, 19 Nov 2002 16:22:44 +0100


> Maybe U would try 2.5.48, just to see if it works then.

I tried 2.5.48 but Linux didn't detect ide3,4,5,6.

---
DEV: registering device: ID = '00:0e.0', name = Triones Technologies HPT374
kobject 00:0e.0: registering
  parent is pci0
bus pci: add device 00:0e.0
DEV: registering device: ID = '00:0e.1', name = Triones Technologies HPT374 (#2)
kobject 00:0e.1: registering
  parent is pci0
bus pci: add device 00:0e.1
[..]
bus type 'ide' registered
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
---
2.5.47 won't boot.

2.5.46 is working:

---
Linux version 2.5.46 (root@pikelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Tue Nov 19 15:19:44 CET 2002
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100%% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:DMA, hdh:DMA
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
HPT37X: using 33MHz PCI clock
    ide4: BM-DMA at 0xc800-0xc807, BIOS settings: hdi:DMA, hdj:DMA
    ide5: BM-DMA at 0xc808-0xc80f, BIOS settings: hdk:DMA, hdl:DMA
hdg: MAXTOR 4K080H4, ATA DISK drive
hdh: WDC WD800AB-00CBA0, ATA DISK drive
ide3 at 0xac00-0xac07,0xb002 on irq 10
hdi: MAXTOR 4K080H4, ATA DISK drive
hdj: WDC WD800AB-00CBA0, ATA DISK drive
ide4 at 0xb800-0xb807,0xbc02 on irq 10
hdk: MAXTOR 4K080H4, ATA DISK drive
hdl: MAXTOR 4K080H4, ATA DISK drive
ide5 at 0xc000-0xc007,0xc402 on irq 10
---

> When I'm back home in about 7 hours, I'll check my bios settings, maybe this > could help you.

That would be great, thanks.

Karsten - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/